参数资料
型号: 514MBAXXXXXXAAGR
厂商: SILICON LABORATORIES
元件分类: 时钟产生/分配
英文描述: 250 MHz, OTHER CLOCK GENERATOR, PDSO6
封装: 5 X 7 MM, ROHS COMPILANT PACKAGE-6
文件页数: 32/32页
文件大小: 267K
代理商: 514MBAXXXXXXAAGR
Si514
Preliminary Rev. 0.9
9
2. Functional Description
The Si514 offers system designers a programmable, low jitter XO solution with exceptionally fine frequency tuning
resolution. To enable designers to take full advantage of this flexibility and performance, Silicon Laboratories
provides an easy-to-use evaluation kit and intuitive suite of Windows-based software utilities to simplify the Si514
programming process.
The Si5xx-PROG-EVB kit contains the Programmable Oscillator Software suite and an EVB Driver (USBXpress)
for use with USB-equipped PCs. Go to
http://www.silabs.com/products/clocksoscillators/Pages/DevelopmentTools.aspx
for more information.
Alternatively, section 2.1 provides designers a detailed description, along with examples, of the frequency
programming requirements and process for designers who are interested in learning more about the programming
algorithms implemented within the Programmable Oscillator Software suite.
2.1. Programming a New Output Frequency
The output frequency (Fout) is determined by programming the feedback multiplier (M=M_Int.M_Frac), High-
Speed Divider (HS_DIV), and Low-Speed Divider (LS_DIV) according to the following formula:
Figure 1. Block Diagram of Si514
The value of the feedback multiplier M is adjustable in the following range:
65.04065041
M 78.17385866.
This keeps the VCO frequency within the range of 2080 MHz FVCO 2500 MHz, since the VCO frequency is the
product of the internal fixed-frequency crystal (FXO) and the high-resolution 29-bit fractional multiplier (M). This 29-
bit resolution of M allows the VCO frequency to have a frequency tuning resolution of 0.026 ppb.
The device comes from the factory with a pre-programmed center frequency within the range of
100 kHz FOUT 250 MHz, as specified by the 6-digit code in the part number. (See section “6. Ordering
Information” for more information.) To change from the factory-programmed frequency to a different value, the user
must follow one of two algorithms based on the magnitude of the frequency change.
“Small Frequency Change.” To change the frequency by < ±1000 ppm, the user must keep the same center
frequency and only update the value of M. Refer to section "2.2. Programming a Small Frequency Change (sub
“Large Frequency Change.” To change the frequency by
±1000 ppm, the user must change the center
frequency. This may require updates to the output dividers (HS_DIV and/or LS_DIV) and possibly the LP1 and
Fout
FXO M
HS_DIV LS_DIV
--------------------------------------------------
where FXO 31.98MHz
=
相关PDF资料
PDF描述
514MBBXXXXXXBAGR 170 MHz, OTHER CLOCK GENERATOR, PDSO6
514MBBXXXXXXBAG 170 MHz, OTHER CLOCK GENERATOR, PDSO6
514MCAXXXXXXAAG 250 MHz, OTHER CLOCK GENERATOR, PDSO6
514NAAXXXXXXAAGR 250 MHz, OTHER CLOCK GENERATOR, PDSO6
514NABXXXXXXBAG 170 MHz, OTHER CLOCK GENERATOR, PDSO6
相关代理商/技术参数
参数描述
514MCA000776AAG 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Trays
514MCA000776AAGR 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Tape and Reel
514MCA000799AAG 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Trays
514MCA000799AAGR 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Tape and Reel
514MCA000832AAG 制造商:Silicon Laboratories Inc 功能描述:OSCILLATOR - Trays