- 您现在的位置：买卖IC网 > Datasheet目录600 > 58433-4 (TE Connectivity)TOOL CRIMP F/OPTIC ST & SC Datasheet资料下载
参数资料
| 型号： | 58433-4 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP F/OPTIC ST & SC |
| 标准包装： | 25 |
| 系列： | Pro-Crimper III, OPTIMATE |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 光纤 - SC，ST |
| 特点： | 侧面插入，棘齿 |
| 其它名称： | A99105 |
PRO- CRIMPER* III Hand Tool
Frame Assembly 58433- 4
With Die Assembly 58424- 1
Instruction Sheet
408-- 9671
13 JAN 11 Rev D
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-- use, production operations is available.
Jaws
Frame
Lockscrew
Die Assembly
Ratchet
Crimping Chamber
Handles
Ratchet Adjustment
Wheel
The PRO-- CRIMPER III Hand Tool Frame Assembly is a “Commercial” grade
tool and is designed primarily for field installation, repair, maintenance work,
or prototyping in industrial, commercial, or institutional applications. Product
crimped with this tool will meet the crimp height requirement for hand tools in
the appropriate Application Specification (114-- series), but may not comply
with other feature parameters of the specification. Tyco Electronics offers a
variety of tools to satisfy your performance requirements. For additional
information, contact the Tooling Assistance Center at 1-- 800-- 722-- 1111.
Figure 1
i
1. INTRODUCTION
PRO--CRIMPER III Hand Tool Frame Assembly
58433--4 is designed to crimp OPTIMATE*
connectors onto fiber optic cable. See Figure 1.
NOTE All dimensions on this instruction sheet are in
millimeters [with inches in brackets]. Figures are
for identification only and are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 6, REVISION SUMMARY.
2. DESCRIPTION
The tool consists of a frame, handles, jaws, ratchet,
and die assembly having a single crimping chamber.
The die assembly is marked with the part number and
“OPTIMATE 2.5 mm”. The tool features a ratchet
adjustment wheel for adjusting the crimp height.
The die assembly is also available separately.
The tool frame also accepts other die assemblies
designed for PRO--CRIMPER III hand tool frames.
3. CRIMPING PROCEDURE
1. Prepare the cable and connector according to
the instructions packaged with the connector.
2. Squeeze the tool handles until the ratchet
releases, then allow them to open fully.
3. Place the connector in the crimping chamber so
that the flange at the front of the support sleeve
rests against the side of the dies. See Figure 2.
4. Squeeze the tool handles until the ratchet
releases, then allow them to open. Remove the
crimped connector and cable.
5. Clean any epoxy from the die assembly.
E 2011 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 2
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 58442-1 | TOOL HEAD ASSEMBLY RCPT MTA 100 |
| 58443-1 | TOOL HEAD ASSEMBLY MTA .156 |
| 58448-2 | CRIMP TOOL D-SUB TERMINALS |
| 58483-1 | TOOL SMB DIE SET CONN MIL TYPE |
| 58500-1 | TOOL CRIMP SMB RG/174 W/DIE SET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 584341-000 | 制造商:TE Connectivity 功能描述:WIRE/CABLE MISC. - Bulk 制造商:TE Connectivity 功能描述:381A115-4/42-0 |
| 58435-1 | 功能描述:冲压机与冲模 DIE FOR BNC CRIMP RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58436-1 | 功能描述:冲压机与冲模 DIE SET RG58/59 HEX IS9159 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58436-2 | 功能描述:冲压机与冲模 DIE FOR BNC CRIMP RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 58436-3 | 功能描述:冲压机与冲模 DIE FOR BNC CRIMP RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。