- 您现在的位置：买卖IC网 > Datasheet目录601 > 58448-2 (TE Connectivity)CRIMP TOOL D-SUB TERMINALS Datasheet资料下载
参数资料
| 型号： | 58448-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | CRIMP TOOL D-SUB TERMINALS |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, AMPLIMITE |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 圆形和 D-Sub 触点，20-28 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 431 (CN2011-ZH PDF) |
| 配用： | 6-66505-9-ND - CONN SOCKET 24-28AWG GOLD CRIMP 6-66506-1-ND - CONN PIN 20-24AWG GOLD CRIMP 7-66504-0-ND - CONN SOCKET 20-24AWG GOLD CRIMP 1-66504-2-ND - CONN SOCKET 20-24AWG GOLD CRIMP A104951-ND - CONN PIN 24-20AWG CRIMP GOLD A104952-ND - CONN PIN 28-24AWG CIMP 30GOLD A104950-ND - CONN SOCKET 24-20AWG 30GOLD A31986-ND - CONN SOCKET 24-28AWG GOLD CRIMP A31985-ND - CONN SOCKET 20-24AWG GOLD CRIMP A31911-ND - CONN PIN 20-24AWG GOLD CRIMP 更多... |
| 相关产品： | 1214310-1-ND - LOCATOR SUB-ASSEMBLY FOR 58448-2 |
| 其它名称： | A9990 |
PRO- CRIMPER* III Hand Crimping
Tool Assembly 58448- 2
With Die Assembly 58448- 3
Instruction Sheet
408-- 9357
10 Mar 11 Rev E
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-- use, production operations is available.
Locator
Assembly
Front of Tool
(Locator Side)
Die Assembly
Moving Jaw
Ratchet Adjustment
Wheel
The PRO-- CRIMPER III Hand Crimping Tool is a “Commercial” grade tool
and is designed primarily for field installation, repair, maintenance work, or
prototyping in industrial, commercial, or institutional applications. Product
crimped with this tool will meet the crimp height requirement for hand tools in
the appropriate 114 series specification, but may not comply with other feature
parameters of the specification. TE offers a variety of tools to satisfy your
performance requirements. For additional information, contact the Tooling
Assistance Center at 1-- 800-- 722-- 1111.
Stationary Jaw
Pivot Pin
PRO-- CRIMPER III Hand Crimping
Tool Frame 354940-- 1 (408-- 9930)
Back of Tool
(Wire Side)
Stationary Handle
Movable Handle
TE Die
Assembly
58448--3
Locator
Assembly {
1214310--1
Product Family }
AMPLIMITE*
HDP--20 Connector
Crimp Snap--In Contacts
with Insulation Support
Size Range
(AWG)
28--24
24--20
Wire
Insulation Diameter (Max)
(mm [in.])
1.02 [.040]
1.52 [.060]
Strip Length
(mm [in.])
2.54 [.100]
{ Supplied with die assembly. Also available separately.
} Contact the Tooling Assistance Center or Product Information at the numbers listed below for specific contact part numbers.
Figure 1
i
1. INTRODUCTION
PRO--CRIMPER III Hand Crimping Tool Assembly
58448--2 consists of Die Assembly 58448--3 and
PRO--CRIMPER III Hand Crimping Tool Frame
354940--1. The die assembly consists of crimping
dies and a locator assembly.
Read these instructions thoroughly before crimping
any contacts.
NOTE Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 10, REVISION SUMMARY.
2. DESCRIPTION
The tool features a tool frame with a stationary jaw
and handle, moving jaw, moving handle, and
adjustable ratchet that ensures full contact crimping.
The tool frame holds a die assembly with two
crimping chambers. See Figure 1.
The die assembly features a wire anvil, insulation
anvil, wire crimper, and insulation crimper.
Die retaining pins and die retaining screws are used
to position and secure the dies in the tool frame.
Attached to the outside of the frame is a locator
assembly, which contains a locator and contact
retainer. A nut is used on the upper die retaining
screw to hold the locator assembly in place.
E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111
All Rights Reserved PRODUCT INFORMATION 1--800--522--6752
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 58483-1 | TOOL SMB DIE SET CONN MIL TYPE |
| 58500-1 | TOOL CRIMP SMB RG/174 W/DIE SET |
| 58509-1 | DIE SET 22-10AWG BUDGET |
| 58511-5 | FB 2MM ZPACK SEATING TOOL ASSY |
| 58514-2 | DIE SET MR CONN USE WITH A9996 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58448-2 RENT | 制造商:TE Connectivity 功能描述:CRIMP TOOL HDP20RENT |
| 58448-3 | 功能描述:冲压机与冲模 PRO-CRIMPER DIE RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5-84-485 | 制造商:STANLEY 功能描述:PLIER SET 3PCE 制造商:Stanley Electric Co 功能描述:PLIER SET 3PCE |
| 584485-000 | 制造商:TE Connectivity 功能描述:HEAT SHRNK TBING POLYFN BLCK CUT PIECE - Bulk 制造商:TE Connectivity 功能描述:VERSAFIT-1/4-0-1.5IN-SM 制造商:TE Connectivity 功能描述:Heat Shrink Tubing ST Polyolefin Black Thin Loose Piece |
| 584487-000 | 制造商:TE Connectivity 功能描述:TXR40AB90-2412AI - Bulk 制造商:TE Connectivity 功能描述:ADPTR TINEL LOCK ANG SHELL 25, J 制造商:TE Connectivity 功能描述:Connector Accessories Tinel Lock Adapter Right Angle Aluminum Alloy Olive Drab Cadmium Over Electroless Nickel |
发布紧急采购，3分钟左右您将得到回复。