- 您现在的位置：买卖IC网 > Datasheet目录601 > 58448-2 (TE Connectivity)CRIMP TOOL D-SUB TERMINALS Datasheet资料下载
参数资料
| 型号： | 58448-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | CRIMP TOOL D-SUB TERMINALS |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, AMPLIMITE |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 圆形和 D-Sub 触点，20-28 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 431 (CN2011-ZH PDF) |
| 配用： | 6-66505-9-ND - CONN SOCKET 24-28AWG GOLD CRIMP 6-66506-1-ND - CONN PIN 20-24AWG GOLD CRIMP 7-66504-0-ND - CONN SOCKET 20-24AWG GOLD CRIMP 1-66504-2-ND - CONN SOCKET 20-24AWG GOLD CRIMP A104951-ND - CONN PIN 24-20AWG CRIMP GOLD A104952-ND - CONN PIN 28-24AWG CIMP 30GOLD A104950-ND - CONN SOCKET 24-20AWG 30GOLD A31986-ND - CONN SOCKET 24-28AWG GOLD CRIMP A31985-ND - CONN SOCKET 20-24AWG GOLD CRIMP A31911-ND - CONN PIN 20-24AWG GOLD CRIMP 更多... |
| 相关产品： | 1214310-1-ND - LOCATOR SUB-ASSEMBLY FOR 58448-2 |
| 其它名称： | A9990 |
408- 9357
!
i
!
1. Hold the tool so that the front (locator side) is
facing you. Squeeze tool handles together and
allow them to open fully.
2. Insert the contact—mating end first—into the
hole in the locator which corresponds with the
appropriate crimping chamber. Make sure that the
open “U” of the wire barrel and insulation barrel
face the stationary jaw.
CAUTION Do NOT attempt to close the tool handles when
locator contact retainer is between the dies.
Damage to the tool jaws or locator may result.
3. Slide the locator contact retainer out from
between the dies (spring tension will pull the
locator down). Make sure that the wire stop enters
the contact wire stop slot between the wire barrel
and contact shoulder. Release contact retainer.
CAUTION Make sure that both sides of the contact
insulation barrel are started evenly into the
crimping chamber. Do NOT attempt to crimp an
improperly positioned contact.
4. Hold the contact in position, and squeeze the
tool handles together until ratchet engages
sufficiently to hold the contact in position. Do NOT
deform insulation barrel or wire barrel.
5. Insert stripped wire into contact insulation and
wire barrels until it is butted against the wire stop,
as shown in Figure 3.
6. Holding the wire in place, squeeze tool handles
together until ratchet releases. Allow tool handles
to open and remove crimped contact.
NOTE The crimped contact may stick in the crimping
area, but can be removed by pushing downward
on the top of the locator (see Figure 3).
7. Check the contact crimp height as described in
Section 5, CRIMP HEIGHT INSPECTION. If
necessary, adjust the crimp height as described in
Section 6, CRIMP HEIGHT ADJUSTMENT.
5. CRIMP HEIGHT INSPECTION
Crimp height inspection is performed through the use
of a micrometer with a modified anvil, commonly
referred to as a crimp--height comparator. TE does
not manufacture or market crimp--height comparators.
Detailed information on obtaining and using
crimp--height comparators can be found in instruction
sheet 408--7424.
Proceed as follows:
1. Refer to Figure 4 and select the maximum size
wire for the crimping chamber.
2. Refer to Section 3, CRIMPING PROCEDURE,
and crimp the contact accordingly.
3. Using a crimp height comparator, measure the
wire barrel crimp height as shown in Figure 4. If the
crimp height conforms to that shown, the tool is
considered dimensionally correct. If not, the tool
must be adjusted. Refer to Section 6, CRIMP
HEIGHT ADJUSTMENT.
Contact
Retainer
Locator
Back of Tool
(Wire Side)
Tool Stationary
Jaw
Tool Wire
Size Markings
Rev E
Wire
Figure 3
Locator in
Contact Wire
Stop Slot
Wire Strip Length
Wire Inserted to
Locator Wire Stop
3 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| 58483-1 | TOOL SMB DIE SET CONN MIL TYPE |
| 58500-1 | TOOL CRIMP SMB RG/174 W/DIE SET |
| 58509-1 | DIE SET 22-10AWG BUDGET |
| 58511-5 | FB 2MM ZPACK SEATING TOOL ASSY |
| 58514-2 | DIE SET MR CONN USE WITH A9996 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58448-2 RENT | 制造商:TE Connectivity 功能描述:CRIMP TOOL HDP20RENT |
| 58448-3 | 功能描述:冲压机与冲模 PRO-CRIMPER DIE RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 5-84-485 | 制造商:STANLEY 功能描述:PLIER SET 3PCE 制造商:Stanley Electric Co 功能描述:PLIER SET 3PCE |
| 584485-000 | 制造商:TE Connectivity 功能描述:HEAT SHRNK TBING POLYFN BLCK CUT PIECE - Bulk 制造商:TE Connectivity 功能描述:VERSAFIT-1/4-0-1.5IN-SM 制造商:TE Connectivity 功能描述:Heat Shrink Tubing ST Polyolefin Black Thin Loose Piece |
| 584487-000 | 制造商:TE Connectivity 功能描述:TXR40AB90-2412AI - Bulk 制造商:TE Connectivity 功能描述:ADPTR TINEL LOCK ANG SHELL 25, J 制造商:TE Connectivity 功能描述:Connector Accessories Tinel Lock Adapter Right Angle Aluminum Alloy Olive Drab Cadmium Over Electroless Nickel |
发布紧急采购，3分钟左右您将得到回复。