- 您现在的位置：买卖IC网 > PDF目录19180 > 58499-1 (TE Connectivity)TOOL PRO CRIMPER II W/DI PDF资料下载
参数资料
| 型号： | 58499-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/3页 |
| 文件大小： | 0K |
| 描述： | TOOL PRO CRIMPER II W/DI |
| 标准包装： | 5 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 同轴，RF - SMB |
| 特点： | 侧面插入，棘齿 |
| 其它名称： | Q1907823 |
Figure 5 provides dimensions for the die openings.
Figure 4
2. With a screwdriver, adjust the ratchet wheel
from the front of the tool.
3. Observe the ratchet adjustment wheel. If a
tighter crimp is required, rotate the adjustment
wheel counterclockwise to a higher–numbered
setting. If a looser crimp is required, rotate the
adjustment wheel clockwise to a lower–numbered
setting.
4. Re–assemble the lockscrew.
5. Make a sample crimp. If the crimp is acceptable,
the adjustment setting is correct. If the crimp is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
Figure 5
Customer–replaceable parts are shown in Figure 1.
Available separately, Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs. If the dies are damaged or worn
excessively, they must be replaced. Order the repair
kit and replaceable parts through your representative,
or call 1–800–526–5142, or send a facsimile of your
purchase order to 717–986–7605, or write to:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
Ensure that the tool frame and dies are clean by
wiping them with a clean, soft cloth. Remove any
debris with a clean, soft brush. Do not use objects
that could damage any components. When not in use,
keep tool handles closed to prevent objects from
becoming lodged in the dies, and store in a clean, dry
area.
Inspection of the dies should be made on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimping sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the dies must be replaced.
Refer to Section 7, REPLACEMENT.
Revisions to this instruction sheet include:
Updated document to corporate requirements
相关PDF资料 |
PDF描述 |
|---|---|
| A6S-7104-PH | SWITCH DIP 7POS RAISED SMD |
| 5370T1LC | LED RED T-3/4 VERT LOW CUR PCB |
| DP04T | PIANO STYLE DIP SWITCH |
| A6HF-4102-PM | SWITCH DIP 4POS HALF PITCH SMD |
| A6SN-7101-P | SWITCH DIP 7POS FLUSH ACT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5849EAG1W00140 | 功能描述:IO NICU CF V0 制造商:laird technologies emi 系列:* 零件状态:过期 标准包装:228 |
| 5849EBG1W00229 | 制造商:Laird Technologies Inc 功能描述:IO,NICU,CF,V0 / .040X.700X2.290 / UOM=EA |
| 584A-10.016-1 | 制造商:Fox Electronics 功能描述:- Tape and Reel |
| 584A-25-6 | 制造商:Fox Electronics 功能描述:- Cut Tape Product 制造商:Fox Electronics 功能描述:- Tape and Reel |
| 584A-50-2 | 制造商:Fox Electronics 功能描述:- Cut Tape Product |
发布紧急采购，3分钟左右您将得到回复。