- 您现在的位置：买卖IC网 > Datasheet目录601 > 58509-1 (TE Connectivity)DIE SET 22-10AWG BUDGET Datasheet资料下载
参数资料
| 型号： | 58509-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | DIE SET 22-10AWG BUDGET |
| 特色产品： | SOLISTRAND?, Budget, and DIAMOND GRIP? Terminals and Splices |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III，经济型 |
| 压接或电缆尺寸： | 10-22 AWG |
| 压接手柄： | A9996-ND |
| 连接器类型： | 端子及连接件 |
| 产品目录页面： | 382 (CN2011-ZH PDF) |
| 配用： | 331269-ND - CONN RECT TONGUE 10-12AWG #8 328522-ND - CONN SPADE FLNG 16-22AWG #10 327959-ND - CONN RECT TONGUE 10-12AWG #6 327953-ND - CONN RECT TONGUE 10-12AWG #5 326850-ND - CONN RING UNINS 16-22AWG #4 325195-ND - CONN SPADE UNINS 10-12AWG #8 324910-ND - CONN RING UNINS 10-12AWG #6 324604-ND - CONN SPADE FLNG 16-22AWG #2 323837-ND - CONN RING SLTD 16-22AWG #1/4 323835-ND - CONN RING SLTD UNINS 16-22AWG #6 更多... |
| 相关产品： | A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A31883 |
5. Make a sample crimp and measure the crimp
height. If the dimension is acceptable, replace and
secure the lockscrew. If the dimension is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
Figure 6
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimping sections for flattened,
chipped, worn, or broken areas. If damage or
1. Remove the lockscrew from the ratchet
adjustment wheel.
2. With a screwdriver, adjust the ratchet wheel
from the front of the tool.
3. Observe the ratchet adjustment wheel. If a
tighter crimp is required, rotate the adjustment
wheel counterclockwise to a higher–numbered
setting. If a looser crimp is required, rotate the
adjustment wheel clockwise to a lower–numbered
setting.
4. Re–assemble the lockscrew.
Figure 7
abnormal wear is evident, the tool must be replaced.
See Section 9, REPLACEMENT.
Customer–replaceable parts are shown in Figure 1.
Available separately, PRO–CRIMPER III Hand
Crimping Tool Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 717–986–7605, or write to:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG, PA 17105–3608
Revisions to this instruction sheet include:
PRO–CRIMPER II Hand Tool became the
PRO–CRIMPER III Hand Tool
TE logo was applied
Format was updated to the current corporate
requirements
相关PDF资料 |
PDF描述 |
|---|---|
| 58511-5 | FB 2MM ZPACK SEATING TOOL ASSY |
| 58514-2 | DIE SET MR CONN USE WITH A9996 |
| 58517-4 | TOOL PRO-CRIMPER II DIE SET |
| 58519-1 | TOOL CRIMP F/OPTIC FSD STYLE |
| 58529-2 | TOOL DIE SET CRIMP TERMINAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5-850910-1 | 功能描述:标准环形连接器 FLANGED RECEPTACLE RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
| 5-850911-1 | 功能描述:重负荷电源连接器 LGH-3 BULKHEAD REC RoHS:否 制造商:Hirose Connector 系列:PS2 产品类型:Connectors 位置/触点数量: 端接类型:Crimp 触点材料: 触点电镀:Gold 电压额定值: 电流额定值:300 A 附件类型: |
| 5-850912-1 | 制造商:TE Connectivity 功能描述:Conn LGH RCP 1 POS Solder ST Thru-Hole 1 Terminal 1 Port 制造商:TE Connectivity 功能描述:LGH-4 FLANGED RECEPT. - Bulk |
| 5850A510 | 制造商:ORTEL 功能描述: |
| 5850A-510 | 制造商:ORTEL 功能描述: |
发布紧急采购，3分钟左右您将得到回复。