- 您现在的位置：买卖IC网 > Datasheet目录601 > 58519-1 (TE Connectivity)TOOL CRIMP F/OPTIC FSD STYLE Datasheet资料下载
参数资料
| 型号： | 58519-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP F/OPTIC FSD STYLE |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 光纤 - FSD |
| 特点： | 侧面插入，棘齿 |
| 配用： | 5502015-3-ND - KIT, CONN, FSD, 125 UM, LDD 5501780-3-ND - CONN KIT, DUALAN, FSD, 125 UM 5502015-1-ND - KIT,CONN,FSD,125UM,LDD 5501780-1-ND - CONN KIT,DUALAN,FSD,125UM 502020-1-ND - BREAKOUT KIT ASSY,FSD AND RSD 501780-4-ND - CONN KIT,DUALAN,FSD,NO SR,BULK 501780-3-ND - CONN PLUG DUALAN 125MICRON KIT 501780-1-ND - CONN KIT,DUALAN,FSD,125UM |
| 其它名称： | A99107 |
PRO- CRIMPER* III Hand
Crimping Tool Assembly 58519- 1
with Die Assembly 58510- 1
Instruction Sheet
408-- 9917
22 JAN 10 Rev B
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-- use, production operations is available.
Indenter Die
Stationary Jaw
Movable Jaw
Emergency
Ratchet
Release
Pivot Pin
Ratchet
Adjustment
Screw
Anvil Die
Crimping Die
Assembly 58510--1
Ratchet
Adjustment
Wheel
Die Retaining
Screws
The PRO-- CRIMPER III Hand Crimping Tool is a “Commercial” grade hand tool
and is designed primarily for field installation, repair, maintenance work,
or prototyping in industrial, commercial, or institutional applications. Product
crimped with this tool will meet the crimp height requirement for hand tools in the
appropriate 114 application specification, but may not comply with other feature
parameters of the specification. Tyco Electtronics offers a variety of tools to
satisfy your performance requirements. For additional information, contact the
Tooling Assistance Center at 1-- 800-- 722-- 1111.
Figure 1
PRO--CRIMPER III Hand Crimping
Tool Frame Assembly 58532--[ ]
1. INTRODUCTION
This instruction sheet provides application and
maintenance procedures for Crimping Die Assembly
58510--1. See Figure 1. When used in
PRO--CRIMPER III Hand Crimping Tool Frame
Assembly 58532--[ ] the die assembly crimps
Fixed--Shroud Duplex fiber--optic connectors with
base part numbers 501780 and 502015, and FSD
Breakout Kit Assembly 502020.
The die assembly and frame assembly together form
PRO--CRIMPER III Hand Crimping Tool Assembly
58519--1. The die assembly can be purchased
separately, or purchased with the hand tool assembly.
For connector assembly procedures, refer to
instruction sheet 408--9373 (FSD Connectors) or
408--9469 (FSD Breakout Kit Assembly). For
information concerning the use and maintenance of
Frame Assembly 58532--1, refer to instruction sheet
408--4020.
Read these and all referenced materials before using
the die assembly.
Reasons for reissue are in Section 7, REVISION
SUMMARY.
2. DESCRIPTION
The die assembly features an indenter die and an
anvil die. When closed, the dies form two crimping
chambers, which crimp the crimp ring of the
connector onto the connector strain relief and the
cable strength members. The larger crimping
chamber is used to crimp FSD connectors. Both
chambers are used for the breakout kit assembly: the
larger to crimp duplex crimp rings and the smaller to
crimp simplex crimp rings. Each die is held in the tool
jaws with a single screw. See Figure 2.
E 2010 Tyco Electronics Corporation, Harrisburg, PA TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
All International Rights Reserved PRODUCT INFORMATION 1-- 800-- 522-- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 4
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 58529-2 | TOOL DIE SET CRIMP TERMINAL |
| 58532-1 | TOOL FIBER OPTIC PRO CRIMPER III |
| 58541-2 | TOOL DIE FOR PRO-CRIMPER II |
| 58545-1 | DIE SET UNINSULATED TERMINALS |
| 58558-1 | CONSUMER BNC TOOL RG 58/59 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5851-9SL005 | 制造商:Alpha Wire Company 功能描述:Grey hook-up equipment wire,30awg |
| 5851A20003J | 制造商:LG Corporation 功能描述:Drier Assembly |
| 5851A20003M | 制造商:LG Corporation 功能描述:Drier Assembly |
| 5851A30001A | 制造商:LG Corporation 功能描述:DRIER ASSY |
| 5851A30001D | 制造商:LG Corporation 功能描述:Drier Assembly |
发布紧急采购，3分钟左右您将得到回复。