- 您现在的位置：买卖IC网 > Datasheet目录601 > 58514-2 (TE Connectivity)DIE SET MR CONN USE WITH A9996 Datasheet资料下载
参数资料
| 型号： | 58514-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | DIE SET MR CONN USE WITH A9996 |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, MR |
| 压接或电缆尺寸： | 18-26 AWG |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 产品目录页面： | 242 (CN2011-ZH PDF) |
| 配用： | 350666-1-ND - CONN SOCKET 18-26AWG CRIMP TIN A25442-ND - CONN PIN GRND 18-26AWG TIN CRIMP A25445-ND - CONN SOCKET 24-26AWG GOLD CRIMP A25441-ND - CONN SOCKET 24-26AWG TIN CRIMP A25444-ND - CONN PIN 24-26AWG GOLD CRIMP A25446-ND - CONN PIN 18-26AWG GOLD CRIMP A25440-ND - CONN PIN 24-26AWG TIN CRIMP A14196-ND - CONN SOCKET 18-26AWG GOLD CRIMP A14197-ND - CONN SOCKET 18-26AWG TIN CRIMP A14198-ND - CONN PIN 18-26AWG GOLD CRIMP 更多... |
| 相关产品： | 679304-1-ND - TOOL PNEUMATIC HEAD ASSEMBLY A97885-ND - TOOL HAND CRIMPING SDE PEW 12 A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A9949 |
408-9973
3. Place a contact with wire into the proper nest and
close the tool handles until the ratchet reaches the
sixth click, or until the contact support touches the
contact.
4. Slightly loosen the nut that holds the locator
assembly onto the tool frame.
5. Move the contact support as required to eliminate
the bending of the contact.
6. Tighten the nut and close the handles until the
ratchet releases.
7. Remove and inspect the contact.
8. Make another sample crimp. If the contact is
straight, tighten the contact support screw. If the
contact is still being bent during crimping, repeat the
adjustment procedure.
5. CRIMPING PROCEDURE
the length indicated in Figure 1, taking care not to nick
or cut wire strands. Select an applicable contact and
identify the appropriate crimp section according to the
wire size markings on the tool. Refer to Figure 3 and
proceed as follows:
1. Hold the tool so that the back (wire side) is facing
you. Squeeze tool handles together and allow them
to open fully.
2. Holding the contact by the mating end, insert the
contact - insulation barrel first - through the front of
the tool and into the appropriate crimp section.
3. Position the contact so that the mating end of the
contact is on the locator side of the tool, and so that
the open "U" of the wire and insulation barrels must
face the top of the tool. Place the contact up into the
nest so that the movable locator drops into the slot
in the contact. Refer to Figure 3. Butt the front end
of the wire barrel against the movable locator.
attempt to crimp an improperly positioned contact.
NOTE
i
This tool is provided with a crimp adjustment
feature. Initially, the crimp height should be verified
as specified in Figure 4. Refer to Section 6, Crimp
Height Inspection, and Section 7, RATCHET
(Crimp Height) Adjustment, to verify crimp height
before using the tool to crimp desired contacts and
wire sizes.
CAUTION Make sure that both sides of the insulation barrel
are started evenly into the crimping section. Do not
!
4. Hold the contact in position and squeeze the tool
handles together until ratchet engages sufficiently to
Refer to the table in Figure 1 and select wire of the
specified size and insulation diameter. Strip the wire to
hold the contact in position. Do NOT deform
insulation barrel or wire barrel.
Adjustment
Screw for
Contact ?
Support
Contact
Support
Locator
Back of Tool
(Wire Side)
Contact
(Typ)
Strip
Length
Rev C
Wire
Figure 3
Locator
in Wire
Stop Slot
Wire
Inserted
to Stop
3 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 58517-4 | TOOL PRO-CRIMPER II DIE SET |
| 58519-1 | TOOL CRIMP F/OPTIC FSD STYLE |
| 58529-2 | TOOL DIE SET CRIMP TERMINAL |
| 58532-1 | TOOL FIBER OPTIC PRO CRIMPER III |
| 58541-2 | TOOL DIE FOR PRO-CRIMPER II |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5851421 | 制造商:Dialight 功能描述:LED Uni-Color Yellow 585nm 2-Pin |
| 585-1421 | 功能描述:LED替换灯-基于LED MIDG FLNG YELLOW 6V NON-POL. RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| 5851421F | 功能描述:LED Lamp Replacement Yellow Midget Flange 6V T - 1 3/4 制造商:dialight 系列:585 零件状态:停产 可更换灯:多小型法兰基座灯 大小/尺寸:T - 1 3/4 波长:585nm 电压 - 正向（Vf）（典型值）:6V 基底类型:小型法兰 颜色:黄 毫烛光等级:18mcd 配置:单一 应用:白炽灯替换件，指示灯 标准包装:5 |
| 585-1421F | 功能描述:LED替换灯-基于LED MIDG FLNG YELLOW 6V NON-POL. RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| 5851423 | 制造商:Dialight 功能描述:LED Uni-Color Yellow 585nm 2-Pin |
发布紧急采购，3分钟左右您将得到回复。