- 您现在的位置：买卖IC网 > PDF目录56743 > 5962-9470301MXA (ANALOG DEVICES INC) 2-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDIP48 PDF资料下载
参数资料
| 型号： | 5962-9470301MXA |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | ADC |
| 英文描述： | 2-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDIP48 |
| 封装： | CERAMIC, DIP-48 |
| 文件页数： | 7/9页 |
| 文件大小： | 154K |
| 代理商： | 5962-9470301MXA |
REV. B
AD9058
–7–
t
V
t
PD
N
tA
N + 1
ANALOG INPUT
ENCODE
D – D
0
7
DATA
CHANGING
VALID DATA
FOR N – 1
VALID DATA
FOR N
VALID DATA
FOR N + 1
N + 2
tV = DATA DELAY OF
PRECEDING ENCODE
t
PD = OUTPUT PROPAGATION DELAY
= APERTURE TIME
t A
Figure 4. AD9058 Timing Diagram
Figure 5 below shows what the analog input to the AD9058 would
look like when observed relative to the sample clock. Signal-
to-noise ratio (SNR), transient response, and sample rate are all
critical specifications in digitizing this “eye pattern.”
ANALOG
INPUT
SAMPLE
CLOCK
Figure 5. AD9058 I and Q Input Signals
Receiver sensitivity is limited by the SNR of the system. For the
ADC, SNR is measured in the frequency domain and calculated
with a Fast Fourier Transform (FFT). The signal-to-noise ratio
equals the ratio of the fundamental component of the signal
(rms amplitude) to the rms level of the noise. Noise is the sum
of all other spectral components, including harmonic distortion,
but excluding dc.
Although the signal being sampled does not have a significant
slew rate at the instant it is encoded, dynamic performance of
the ADC and the system is still critical. Transient response is the
time required for the AD9058 to achieve full accuracy when a
step function input is applied. Overvoltage recovery time is the in-
terval required for the AD9058 to recover to full accuracy after
an overdriven analog input signal is reduced to its input range.
Time domain performance of the ADC is also extremely impor-
tant in digital oscilloscopes. When a track (sample)-and-hold is
used ahead of the ADC, its operation becomes similar to that
described above for receivers.
The dynamic response to high-frequency inputs can be described
by the effective number of bits (ENOB). The effective number of bits
is calculated with a sine wave curve fit and is expressed as:
ENOB = N – LOG2 [Error (measured)/Error (ideal)]
where N is the resolution (number of bits) and measured error
is actual rms error calculated from the converter’s outputs with
a pure sine wave applied as the input.
Maximum conversion rate is defined as the encode (sample) rate
at which SNR of the lowest frequency analog test signal drops
no more than 3 dB below the guaranteed limit.
HARMONIC
DISTORTION
–
dB
60
55
50
45
40
35
INPUT FREQUENCY – MHz
0.1
1
10
100
30
+25°C
–55°C
+125°C
Figure 6. Harmonic Distortion vs. Analog Input Frequency
0.1
1
10
100
INPUT FREQUENCY – MHz
8.0
7.2
6.4
5.5
EFFECTIVE
NO.
OF
BITS
(ENOB)
55
50
45
40
35
30
SIGNAL-TO-NOISE
RATIO
(SNR)
–
dB
+25°C AND +125°C
–55°C
Figure 7. AD9058 Dynamic Performance vs. Analog Input
Frequency
相关PDF资料 |
PDF描述 |
|---|---|
| 5962-9470301MYX | DUAL 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CQCC44 |
| 5962-9470301MXX | DUAL 1-CH 8-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, CDIP48 |
| 5962-9474301MXA | 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP28 |
| 5962-9474301MXX | 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP28 |
| 5962-9474601QEA | STEPPER MOTOR CONTROLLER, 1 A, CDIP16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5962-9470301MYA | 制造商:Analog Devices 功能描述:ADC DUAL FLASH 50MSPS 8BIT PARALLEL 44PIN JLCC - Rail/Tube |
| 5962-9470401QXA | 制造商:Texas Instruments 功能描述:FIFO Mem Sync Dual Bi-Dir 512 x 18 x 2 84-Pin CPGA |
| 5962-9471601H4A | 制造商:Micross Components, Inc. 功能描述:FLASH-MCM,4 MB - Trays |
| 5962-9471601H8C | 制造商:Microsemi Corporation 功能描述:128K X 32 FLASH MODULE, 5V, 150NS, NO CONNECT, 66 PGA 1.075" - Bulk 制造商:White Electronic Designs 功能描述:128K X 32 FLASH MODULE, 5V, 150NS, NO CONNECT, 66 PGA 1.075" - Bulk |
| 5962-9471601HAA | 制造商:Micross Components 功能描述:FLASH-MCM,4 MB - Trays |
发布紧急采购，3分钟左右您将得到回复。