- 您现在的位置：买卖IC网 > Datasheet目录603 > 69734 (TE Connectivity)DIE PIDG STRATO 69710 #14 Datasheet资料下载
参数资料
| 型号： | 69734 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/11页 |
| 文件大小： | 0K |
| 描述： | DIE PIDG STRATO 69710 #14 |
| 标准包装： | 5 |
| 系列： | * |
Terminal and Splice
Crimping Die Assemblies
Instruction Sheet
408-- 1632
19 APR 11 Rev C
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-- use, production operations is available.
Stationary
Die
Note: Die Assembly Shown is Typical
Die Holding
Screw
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
Color
Code
Moving
Die
The die assembly consists of a moving die and a
stationary die. See Figure 1.
Color
Code
Locator
Insulation Adjustment
Spacers in Position 3
CRIMPING DIE ASSEMBLIES
The dies and the terminals and splices are color--
coded according to wire size for easy identification.
When the terminal and splice are properly crimped in
the correct die assembly, 1 dot or 2 dots (depending
on wire size) will appear embossed on the top and
bottom of the terminal or splice. DIAMOND GRIP
terminals and splices do not have a color code or
crimp dot code. See Figures 2, 3, and 4.
3. CRIMPING PROCEDURE
46251--2
47806--2
47807--1
47808--6
69342
69344
69732
69733
69734
NOTE
i
The dies are coated with oil to prevent rust and
corrosion. Wipe this oil from the dies, particularly
from the crimping area.
47808--5
69731
Figure 1
69735
1. Install the die assembly according to the
instructions included with the tool.
1. INTRODUCTION
The die assemblies listed in Figure 1 will crimp
terminals and splices for the following product families
NOTE
i
Refer to Paragraph 2.4 for insulation crimp
adjustment.
with wire sizes 26 through 10 AWG:
— PIDG* terminals and splices
— PIDG insulation restricting nylon terminals
— PIDG STRATO--THERM* terminals
2. Strip the wire to the dimensions provided in
Figure 2, 3, 4, or 5; depending on the wire size and
product to be crimped.
3. Place the terminal or splice in the stationary die
as shown in Figure 6, 7, or 8.
with wire sizes 22 through 10 AWG:
— PLASTI--GRIP* terminals
— DIAMOND GRIP* terminals and splices
NOTE
i
Dies will not accommodate terminals with tongue
width exceeding 11.91 [.469].
i
These die assemblies are designed to be used with
Hand Tool 69710--1. Refer to Instruction Sheet
408--2095 for information concerning the tool.
Contact TOOLING ASSISTANCE CENTER at the
number at the bottom of this page for other
recommended tooling.
NOTE All numerical values in this instruction sheet are
in metric units [with U.S. customary units in
brackets]. Dimensions are in millimeters [and
inches]. Figures are not drawn to scale.
4. Close the tool handles until the terminal or splice
is held firmly in place.
5. For a terminal, insert a stripped wire into the
insulation barrel until the wire butts against the
locator. For a splice, insert the stripped wire into an
insulation barrel until the wire butts against the wire
stop in the splice.
6. Complete the crimp by closing the tool handles
until the ratchet releases.
E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 11
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 69760 | ADAPTER SOLIS FLAG 69099 8-4/0 |
| 69814 | TOOL DIE BNC-TNC CRIMPING |
| 69815 | TOOL DIE BNC-TNC CRIMPING |
| 69872 | DIE PIDG 69875 22-16AWG |
| 69874 | TOOL DIE PIDG 69875 12-10AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 6973470001 | 制造商:TE Connectivity 功能描述:Cable Markers Cross Linked Polyolefin Black Pack 制造商:TE Connectivity 功能描述:TMS-SCE-1/4-2.0-0 - Cable Rools/Shrink Tubing |
| 69735 | 功能描述:冲压机与冲模 DIE ASSY 12-10 BLK RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 697-3800 | 制造商:ISOTECH 功能描述:Noise Dose Meter |
| 69738-001 | 制造商:FCI 功能描述:Conn Socket Strip F 60 POS 1.27mm Solder ST Edge Mount |
| 697381-000 | 制造商:TE Connectivity 功能描述:55 CABLE - Cable Rools/Shrink Tubing 制造商:TE Connectivity 功能描述:55PC1144-24-CML4-9CS2502 |
发布紧急采购，3分钟左右您将得到回复。