- 您现在的位置：买卖IC网 > PDF目录294084 > 7016L20JGI (INTEGRATED DEVICE TECHNOLOGY INC) 16K X 9 DUAL-PORT SRAM, 20 ns, PQCC68 PDF资料下载
参数资料
| 型号： | 7016L20JGI |
| 厂商： | INTEGRATED DEVICE TECHNOLOGY INC |
| 元件分类： | SRAM |
| 英文描述： | 16K X 9 DUAL-PORT SRAM, 20 ns, PQCC68 |
| 封装： | 0.950 X 0.950 INCH, 0.170 INCH HEIGHT, GREEN, PLASTIC, LCC-68 |
| 文件页数： | 8/20页 |
| 文件大小： | 164K |
| 代理商： | 7016L20JGI |
6.42
IDT7016S/L
High-Speed 16K x 9 Dual-Port Static RAM
Military, Industrial and Commercial Temperature Ranges
16
Truth Table IV — Address BUSY
Arbitration
NOTES:
1. Pins
BUSYL and BUSYR are both outputs when the part is configured as a master. Both are inputs when configured as a slave. BUSYX outputs on the IDT7016 are
push-pull, not open drain outputs. On slaves the
BUSYX input internally inhibits writes.
2. "L" if the inputs to the opposite port were stable prior to the address and enable inputs of this port. "H" if the inputs to the opposite port became stable after the address
and enable inputs of this port. If tAPS is not met, either
BUSYL or BUSYR = LOW will result. BUSYL and BUSYR outputs can not be LOW simultaneously.
3. Writes to the left port are internally ignored when
BUSYL outputs are driving LOW regardless of actual logic level on the pin. Writes to the right port are internally ignored
when
BUSYR outputs are driving LOW regardless of actual logic level on the pin.
Truth Table V — Example of Semaphore Procurement Sequence(1,2,3)
NOTES:
1. This table denotes a sequence of events for only one of the eight semaphores on the IDT7016.
2. There are eight semaphore flags written to via I/O0 and read from all I/Os (I/O0 - I/O8). These eight semaphores are addressed by A0 - A2.
e.
CE = VIH, SEM = VIL to access the semaphores. Refer to the semaphore Read/Write Truth Table.
where a write is defined as the
CE = R/W = VIL per Truth Table III. The
leftportclearstheinterruptbyanaddresslocation3FFEaccesswhen
CER
=
OER =VIL, R/W is a "don't care". Likewise, the right port interrupt flag
(INTR) is asserted when the left port writes to memory location 3FFF and
to clear the interrupt flag (INTR), the right port must access memory
location 3FFF. The message (9 bits) at 3FFE or 3FFF is user-defined
since it is in an addressable SRAM location. If the interrupt function is not
used, address locations 3FFE and 3FFF are not used as mail boxes but
are still part of the random access memory. Refer to Truth Table III for the
interruptoperation.
Functional Description
The IDT7016 provides two ports with separate control, address and
I/Opinsthatpermitindependentaccessforreadsorwritestoanylocation
inmemory.TheIDT7016hasanautomaticpowerdownfeaturecontrolled
by
CE. The CE controls on-chip power down circuitry that permits the
respective port to go into a standby mode when not selected (
CE HIGH).
When a port is enabled, access to the entire memory array is permitted.
Interrupts
Iftheuserchoosestheinterruptfunction,amemorylocation(mailbox
or message center) is assigned to each port. The left port interrupt flag
(
INTL) is asserted when the right port writes to memory location 3FFE
Inputs
Outputs
Function
CEL
CER
AOL-A13L
AOR-A13R
BUSYL(1)
BUSYR(1)
X
NO MATCH
H
Normal
H
X
MATCH
H
Normal
X
H
MATCH
H
Normal
L
MATCH
(2)
Write Inhibit(3)
3190 tbl 17
Functions
D0 - D8 Left
D0 - D8 Right
Status
No Action
1
Semaphore free
Left Port Writes "0" to Semaphore
0
1
Left port has semaphore token
Right Port Writes "0" to Semaphore
0
1
No change. Right side has no write access to semaphore
Left Port Writes "1" to Semaphore
1
0
Right port obtains semaphore token
Left Port Writes "0" to Semaphore
1
0
No change. Left port has no write access to semaphore
Right Port Writes "1" to Semaphore
0
1
Left port obtains semaphore token
Left Port Writes "1" to Semaphore
1
Semaphore free
Right Port Writes "0" to Semaphore
1
0
Right port has semaphore token
Right Port Writes "1" to Semaphore
1
Semaphore free
Left Port Writes "0" to Semaphore
0
1
Left port has semaphore token
Left Port Writes "1" to Semaphore
1
Semaphore free
3190 tbl 18
相关PDF资料 |
PDF描述 |
|---|---|
| 7016L25PFG | 16K X 9 DUAL-PORT SRAM, 25 ns, PQFP80 |
| 7016S35PFGB | 16K X 9 DUAL-PORT SRAM, 35 ns, PQFP80 |
| 70219-920 | 8 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
| 70219-921LF | 20 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
| 70219-921 | 20 CONTACT(S), FEMALE, RIGHT ANGLE TWO PART BOARD CONNECTOR, SOLDER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 7016L20JI | 制造商:Integrated Device Technology Inc 功能描述:SRAM Chip Async Dual 5V 144K-Bit 16K x 9-Bit 20ns 68-Pin PLCC 制造商:Integrated Device Technology Inc 功能描述:SRAM Chip Async Dual 5V 144K-Bit 16K x 9-Bit 20ns 68-Pin PLCC Tube 制造商:Integrated Device Technology Inc 功能描述:SRAM ASYNC DUAL 5V 144KBIT 16KX9 20NS 68PLCC - Rail/Tube |
| 7016L20JI8 | 制造商:Integrated Device Technology Inc 功能描述:SRAM Chip Async Dual 5V 144K-Bit 16K x 9-Bit 20ns 68-Pin PLCC T/R 制造商:Integrated Device Technology Inc 功能描述:SRAM ASYNC DUAL 5V 144KBIT 16KX9 20NS 68PLCC - Tape and Reel |
| 7016L20PF | 功能描述:静态随机存取存储器 RoHS:否 制造商:Cypress Semiconductor 存储容量:16 Mbit 组织:1 M x 16 访问时间:55 ns 电源电压-最大:3.6 V 电源电压-最小:2.2 V 最大工作电流:22 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TSOP-48 封装:Tray |
| 7016L20PF8 | 功能描述:静态随机存取存储器 RoHS:否 制造商:Cypress Semiconductor 存储容量:16 Mbit 组织:1 M x 16 访问时间:55 ns 电源电压-最大:3.6 V 电源电压-最小:2.2 V 最大工作电流:22 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:TSOP-48 封装:Tray |
| 7016L20PFI | 制造商:Integrated Device Technology Inc 功能描述:SRAM Chip Async Dual 5V 144K-Bit 16K x 9-Bit 20ns 80-Pin TQFP 制造商:Integrated Device Technology Inc 功能描述:SRAM Chip Async Dual 5V 144K-Bit 16K x 9-Bit 20ns 80-Pin TQFP Tray 制造商:Integrated Device Technology Inc 功能描述:SRAM ASYNC DUAL 5V 144KBIT 16KX9 20NS 80TQFP - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。