参数资料
型号: 71M6513-IGT/F
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, PQFP100
封装: LEAD FREE, LQFP-100
文件页数: 47/104页
文件大小: 1390K
代理商: 71M6513-IGT/F
71M6513/71M6513H
3-Phase Energy Meter IC
DATA SHEET
SEPTEMBER 2011
2005-2011 Teridian Semiconductor Corporation
Page: 47 of 104
A Maxim Integrated Products Brand
Battery
The VBAT pin provides an input for an external battery that can be used to support the crystal oscillator, RTC, the WD_OVF bit
and XRAM in the absence of the main power supply. If the battery is not used, the VBAT pin should be connected to V3P3.
Internal Voltages (VBIAS, VBAT, V2P5)
The 71M6513 requires two supply voltages, V3P3A, for the analog section, and V3P3D, for the digital section. Both voltages
can be tied together outside the chip. The internal supply voltage V2P5 is generated by a regulator from the 3.3V supplies.
The battery voltage, VBAT, is required when crystal oscillator, RTC and XRAM are required to keep operating while V3P3D is
removed (battery mode). VBAT, usually supplied by an external battery, powers crystal oscillator, RTC and XRAM (and the
WD_OVF bit).
VBIAS (1.5V) is generated internally and used for the comparators V1, V2 and V3.
Test Ports
TMUXOUT Pin: One out of 16 digital or 4 analog signals can be selected to be output on the TMUXOUT pin. The function of
the multiplexer is controlled with the I/O RAM register TMUX (0x2000[3:0]), as shown in Table 57.
TMUX[3:0]
Mode
Function
0
analog
DGND
1
analog
IBIAS
2
analog
PLL_2.5V
3
analog
VBIAS
4
digital
RTM (Real time output from CE)
5
digital
WDTR_EN (Comparator 1 Output AND V1LT3)
6
digital
V2_OK (Comparator 2 Output)
7
digital
V3_OK (Comparator 3 Output)
8
digital
RXD (from Optical interface)
9
digital
MUX_SYNC
A
digital
CK_10M
B
digital
CK_MPU
C
--
reserved for production test
D
digital
RTCLK
E
digital
CE_BUSY
F
digital
XFER_BUSY
Table 57: TMUX[3:0] Selections
Emulator Port: The emulator port, consisting of the pins E_RST, E_TCLK and E_RXTX provides control of the MPU through
an external in-circuit emulator. The E_TBUS[3:0] pins, together with the E_ISYNC/BRKRQ add trace capability to the
emulator. The emulator port is compatible with the ADM51 emulators manufactured by Signum Systems.
The signals of the emulator port have weak pull-ups. Adding 1k
pull-up resistors on the PCB is recommended.
Real-Time Monitor: The RTM output of the CE is available as one of the digital multiplexer options. RTM data is read from the
CE DRAM locations specified by I/O RAM registers RTM0, RTM1, RTM2, and RTM3 after the rise of MUX_SYNC. The RTM can
be enabled and disabled with I/O RAM register RTM_EN. The RTM output is clocked by CKTEST. Each RTM word is clocked
相关PDF资料
PDF描述
71M6515H-IGTW/F SPECIALTY ANALOG CIRCUIT, PQFP64
71M6515H-IGTWR/F SPECIALTY ANALOG CIRCUIT, PQFP64
71M6515H-IGTR/F SPECIALTY ANALOG CIRCUIT, PQFP64
71M6515H-IGT/F SPECIALTY ANALOG CIRCUIT, PQFP64
7234 SPECIALTY ANALOG CIRCUIT, CDIP22
相关代理商/技术参数
参数描述
71M6513-IGTR/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513-IGTR/F1 功能描述:计量片上系统 - SoC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Energy Meter IC
71M6515H_11 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6515H-DB 功能描述:开发板和工具包 - 8051 71M6515H Demo Brd RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:C8051F960, Si7005 核心: 接口类型:USB 工作电源电压: