- 您现在的位置：买卖IC网 > PDF目录18007 > 732998 (Multicore)97SC C511 2% .064DIA/16SWG PDF资料下载
参数资料
| 型号： | 732998 |
| 厂商： | Multicore |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | 97SC C511 2% .064DIA/16SWG |
| MSDS 材料安全数据表： | MM01951, 732998 MSDS |
| 标准包装： | 20 |
| 系列： | C511™ |
| 制程： | 无铅 |
| 类型： | 焊线 |
| 焊剂类型： | 免清洁 |
| 复合体： | Sn96.5Ag3.0Cu0.5（96.5/3/0.5） |
| 线规： | 16 |
| 直径： | 0.064"（1.63mm） |
| 芯体尺寸： | 2% |
| 形态： | 线轴，454g（1 磅） |
| 融点： | 423°F（217°C） |
| 其它名称： | 82-108 MM01951 |
Technical Data Sheet
C511?
October - 2009
PRODUCT DESCRIPTION
C511? provides the following product characteristics:
Technology Cored solder wire
Activity High
Product Benefits ? No clean
Soldering Iron:
● Good results can be obtained using a range of tip
temperatures. However, the optimum tip temperature and
heat capacity required for a hand-soldering process is a
function of both soldering iron design and the nature of
the task.
IPC/J-STD-004
Classification
Application
Surface Finishes
? Clear residue
? Good wetting
? Fast soldering
? Heat stable
? Mild odor
? Pb-free and SnPb alloys available
ROM1
Soldering - Cored wire
Copper, Brass and Nickel
● Care should be exercised to avoid unnecessarily high tip
temperatures for extensive periods of time.
● A high tip temperature may increase any tendency to flux
spitting and it may produce some residue darkening.
● The tip of the soldering iron should be properly tinned.
Severely contaminated soldering iron tips should be
cleaned with Multicore? Tip Tinner/Cleaner.
● Wipe the tip on a clean, damp sponge before re-tinning
with C511? wire.
Soldering Process:
C511? cored solder wire has been specially formulated to
complement no clean wave and reflow soldering processes.
TYPICAL PROPERTIES
Solder Wire - Cored Typical Properties
Alloys - Tin/lead ? SN63
? SN60
? SN62
Alloys - Lead Free ? 96SC (SAC387)
? 97SC (SAC305)
? 99C (SnCu)
1. Apply the soldering iron tip to the work surface. The iron
tip should contact both the base material and the lead at
the same time to heat both surfaces properly. It should
take no more than a fraction of a second to heat both
surfaces adequately.
2. Apply C511? flux cored wire to a part of the joint surface
away from the soldering iron and allow to form a joint
fillet. This will be virtually instantaneous. Do not apply
excessive solder to the joint as this will not improve joint
integrity and it will leave excess flux residues on the
surface.
3. Remove solder from the work piece and then remove the
iron tip.
Acid Value
? 95A (SnSb)
? 96S (SnAg)
164 to 176 mg KOH/g
4. The total process will be very rapid, depending upon
thermal mass, tip temperature, tip configuration and the
solderability of the surfaces to be joined.
Halide content 1.1%
Flux Content (%) 2.7
ALLOYS:
The alloys used in C511? cored solder wires conform to the
purity requirements of the common national and international
standards.
FLUX:
C511? solid flux is based on modified rosin and carefully
selected activators. In practice they exhibit a mild rosin odor
and leave a small quantity of clear residue.
DIRECTIONS FOR USE
Soldering with C511? does not require any special methods
or deviation from standard hand soldering practices.
5. The resin and flux systems are designed to leave
relatively low residues and to minimize residual activity.
This is achieved by ensuring some decomposition and
volatilization takes place during the soldering process
Cleaning:
C511? flux cored solder wire has been formulated to leave
amber flux residues and resist spitting and fuming. In most
industrial and consumer electronics applications, cleaning will
not be required. The product may, therefore, be used to
complement a no-clean wave soldering or reflow process or to
allow repairs to cleaned boards without the need for a second
cleaning process. In high-reliability applications, the residues
should be removed.
Should cleaning be required, this is best achieved using
SC-01? cleaner.
相关PDF资料 |
PDF描述 |
|---|---|
| 50209L | SWITCH SLIDE 3PDT HD |
| MC08CA040C-F | CAP MICA 4PF 100V 0805 |
| FCN2820A274K | CAP FILM 0.27UF 100VDC 2820 |
| 796037 | 97SC C511 2% .015DIA/28SWG |
| 46256LFE | SWITCH SLIDE DPDT LOCKING |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 732999 | 功能描述:97SC C511 3C 1.22MM 0.5KG 制造商:multicore 系列:C511?? 零件状态:在售 类型:焊线 成分:Sn96.5Ag3.0Cu0.5（96.5/3/0.5） 熔点:423°F（217°C） 直径:0.048"（1.22mm） 焊剂类型:免清洁 线规:19 AWG，20 SWG 工艺:无铅 形式:线轴，11 磅（5 kg） 保质期:无保质期 发货信息:- 标准包装:20 |
| 7329N | 功能描述:AO505 ARBOR MT/JT 制造商:apex tool group 系列:* 零件状态:在售 标准包装:1 |
| 732A | 功能描述:直流电源连接器 LOCKING POWER JACK RoHS:否 制造商:Kycon 产品:Receptacles 触点内径: 触点外径: 中心脚长度: 电流额定值:7.5 A 电压额定值:20 V 安装角:Right 安装风格:Cable |
| 732A CAL | 制造商:B&K Precision Corporation 功能描述:CALIBRATED - Digital Sound Level Meter with RS 232 Capability |
| 732A CAL D | 制造商:B&K Precision Corporation 功能描述:732A CALIBRATED |
发布紧急采购，3分钟左右您将得到回复。