参数资料
型号: 866
厂商: B&K Precision
文件页数: 118/172页
文件大小: 0K
描述: PROGRAMMER UNIV W/ USB INTERFACE
标准包装: 1
类型: 通用
适用于相关产品: EPROM、EEPROM 闪存、串行 EPROM、微控制器和 PLD
所含物品: 编程器、适配器、缆线、手册和软件
其它名称: 866BK
Q2005647
Enable target system power supply - enables supplying of
target system from programmer. Supply voltage for target
system is switched on before action with programmed device
and is switched off after action finished. If Keep ISP signals
at defined level after operation is enabled, then programmer
will switch off supply voltage after pull-up/pull-down resistors
are deactivated.
Voltage - supply voltage for target system.
Max. current - maximum current consumption of powered
target system.
Voltage rise time - determines skew rate of rising edge of
target supply voltage (switch on supply voltage).
Target supply settle time - determines time, after which
must be supply voltage in target system stabilized at set
value and target system is ready to any action with
programmed device.
Voltage fall time - determines skew rate of falling edge of
target supply voltage (switch off supply voltage).
Power down time - determines time after switch off target
system power supply within target system keeps residual
supply voltage (e.g. from charged capacitor). After this time
elapsed target system has to be without supply voltage and
can be safely disconnected from programmer.
group Target System Parameters
Oscillator frequency (in Hz) - oscillator's frequency of
device (in target system). Control program sets programming
speed by its, therefore is necessary set correct value.
Supply voltage (in mV) - supply voltage in target system.
Control program checks or sets (it depends on programmer
type) entered supply voltage in target system before every
action on device.
Disable test supply voltage - disables measure and
checking supply voltage of programmed device, set in Supply
voltage edit box, before action with device.
Delay after reset active - this parameter determine delay
after Reset signal active to start action with device. This
delay depends on values of used devices in reset circuit of
device and can be chosen from these values: 10ms, 50ms,
100ms, 500ms or 1s.
118
相关PDF资料
PDF描述
867156-1 CONN RECEPT LGH 1POS
867157-1 PLUG KIT 1POS 24-20AWG GOLD
867298-1 CONN RCPT 6POS CPC BLACK LGH
86730-101LF CONN SHUNT 2MM 2POS GOLD BLACK
867482-1 CONN PLUG 6POS STR FREE HANG
相关代理商/技术参数
参数描述
8660 功能描述:电缆固定件和配件 1" FEMALE CONDUIT ADAPTER RoHS:否 制造商:Heyco 类型:Cable Grips, Liquid Tight 材料:Nylon 颜色:Black 安装方法:Cable 最大光束直径:11.4 mm 抗拉强度:
8660 000 BULK 制造商:Belden Inc 功能描述:1/8" TNC TUBULAR BRAID , NONE BULK
8660 000250 功能描述:连接线 14.3AWG TUBULAR BRD 250ft SPOOL NO COLOR RoHS:否 制造商:Belden Wire & Cable 绞合:19 x 32 电压额定值:1 kV 长度:1000 ft 线规 - 美国线规(AWG):20 绝缘材料:Tetraflouroethylene (TFE) 最大温度:+ 200 C 类型:High Temperature, High Voltage 外壳颜色:Blue (Light) 系列:83027
8660 00050 功能描述:连接线 14.3AWG 1/8" TUBULAR 50’ SPOOL NO COLOR RoHS:否 制造商:Belden Wire & Cable 绞合:19 x 32 电压额定值:1 kV 长度:1000 ft 线规 - 美国线规(AWG):20 绝缘材料:Tetraflouroethylene (TFE) 最大温度:+ 200 C 类型:High Temperature, High Voltage 外壳颜色:Blue (Light) 系列:83027
86600 制造商:Brady Corporation 功能描述: 制造商:Klein Tools Inc 功能描述: