- 您现在的位置：买卖IC网 > Datasheet目录611 > 90188-2 (TE Connectivity)TOOL HAND STR ACTION CRIMP Datasheet资料下载
参数资料
| 型号： | 90188-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND STR ACTION CRIMP |
| 标准包装： | 5 |
| 系列： | Certi-Crimp, Faston |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 快速连接端子，18-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 154661-2-ND - CONN UNINS RECPT 18-22AWG 0.250 |
Instruction Sheet
Hand Crimping Tool 90188–2
408–7270
16 SEP 99 Rev C
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. AMP hand tools are intended for occasional use and low
volume applications. AMP offers a wide selection of powered application equipment for extended–use, production operations.
The CERTI–CRIMP ratchet ensures full crimping of
F
AMP
the terminal. Once engaged, the ratchet will not
release until the handles have been FULLY closed.
Front of
Tool
Crimpers
CAUTION
The crimping dies bottom before the
CERTI–CRIMP ratchet releases. This is a design
feature that assures maximum electrical and
tensile performance of the crimp. Do NOT
90188–2
Anvils
re–adjust the ratchet.
3. CRIMPING PROCEDURE
Select an applicable terminal and a wire of
appropriate size and insulation diameter. Strip the
wire to the length indicated in Figure 2. Do NOT cut
or nick the wire strands.
1. Hold the tool so the BACK of it is facing you.
2. Make certain that the ratchet is released by
squeezing the tool handles and allowing them to
open FULLY.
3. Looking straight into the crimping dies from the
CERTI–CRIMP*
Ratchet
Figure 1
1. INTRODUCTION
This instruction sheet covers application and
maintenance for AMP* Hand Crimping Tool 90188–2,
which is designed to crimp quick–disconnect–type
terminals having open wire and insulation barrels. A
typical terminal is shown in Figure 2. Read these
instructions carefully before applying any terminals.
BACK of the tool, insert a terminal (insulation
barrel first) into the FRONT of the appropriate
crimping section.
4. Position the terminal in the crimpers so that the
locator/insulation stop enters the terminal locator
slot.
5. Hold the terminal in this position and squeeze
the tool handles until the insulation anvil starts
entry into the insulation crimper. Do NOT deform
the insulation barrel or wire barrel.
Typical
NOTE
All dimensions on this sheet are in metric units
[with U.S. customary units in brackets].
Insulation
Wire
Barrel
Terminal
Reasons for reissue are provided in Section 6,
REVISION SUMMARY.
2. DESCRIPTION (Figures 1 and 2)
This tool features two fixed dies (crimpers), two
movable dies (anvils), a locator/insulation stop, and a
CERTI–CRIMP ratchet.
Barrel
Locator
Slot
The locator/insulation stop positions the terminal
between the crimping dies and aids in locating the
wire in the terminal. In use, it rests in the terminal’s
locator slot.
Wire Strip
Length
Terminal Wire Barrel
Length +.76 [+.030 in.].
Figure 2
1999 AMP Incorporated, Harrisburg, PA.
All International Rights Reserved.
*Trademark
This controlled document is subject to change.
For latest revision call the AMP FAX* number.
TOOLING ASSISTANCE CENTER 1–800–722–1111
AMP FAX/PRODUCT INFO 1–800–522–6752
1 of 4
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 90202-4 | ASSEMBLY S.A.H.T. |
| 90204-5 | SAHT F CRP 22-26 |
| 90206-3 | ASSY SAHT |
| 90221-2 | SAHT F CRP 20-24 |
| 90227-1 | DAHT F CRIMP 20-24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9018820000 | 制造商:Weidmuller 功能描述:DIE, MTR 110 -EA - Bulk 制造商:Weidmuller 功能描述:DIE MTR 110 |
| 90-188429-12P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188429-12S | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188429-18P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188430-99P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
发布紧急采购，3分钟左右您将得到回复。