- 您现在的位置：买卖IC网 > Datasheet目录611 > 90188-2 (TE Connectivity)TOOL HAND STR ACTION CRIMP Datasheet资料下载
参数资料
| 型号： | 90188-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND STR ACTION CRIMP |
| 标准包装： | 5 |
| 系列： | Certi-Crimp, Faston |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 快速连接端子，18-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 154661-2-ND - CONN UNINS RECPT 18-22AWG 0.250 |
Back of Tool
(Wire Side)
Crimp Section
Letter Marking
Locator/
Insulation
Stop
Hand Crimping Tool 90188–2
Typical
Terminal
408–7270
Locator in
Wire Slot
Stripped
Insulation
Barrel
Wire
Barrel
Terminal
Locator
Slot
Wire
Figure 3
6. Insert a properly stripped wire through the
locator wire slot and into the wire barrel of the
terminal until the insulation butts against the
locator/insulation stop.
7. Hold the wire in place and squeeze the tool
handles until the ratchet releases.
8. Allow the tool handles to open FULLY and
remove the crimped terminal.
4. MAINTENANCE/INSPECTION
AMP recommends that a maintenance and inspection
program be performed periodically to ensure
dependable and uniform terminations. Frequency of
inspection depends on:
1. The care, amount of use, and handling of the
hand tool.
2. The presence of abnormal amounts of dust and
dirt.
3. The degree of operator skill.
4. Your own established standards.
4.1. Daily Maintenance
1. Remove dust, moisture, and other contaminants
with a clean brush, or a soft, lint–free cloth. Do
NOT use objects that could damage the tool.
2 of 4
2. Make certain that the retaining pins are in place
and that they are secured with retaining rings.
3. When the tool is not in use, keep handles closed
to prevent objects from becoming lodged in the
crimping dies. Store the tool in a clean, dry area.
4.2. Lubrication
Lubricate all pins, pivot points, and bearing surfaces
with SAE 20 motor oil as follows:
Tools used in daily production—lubricate daily
Tools used daily (occasional)—lubricate weekly
Tools used weekly—lubricate monthly
Wipe excess oil from tool, particularly from crimping
area. Oil transferred from the crimping chambers onto
certain terminations may affect the electrical
characteristics of an application.
4.3. Periodic Inspection
1. Hand tool should be immersed (handles partially
closed) in a reliable commercial degreasing
compound to remove accumulated dirt, grease,
and foreign matter.
2. Close tool handles until the CERTI–CRIMP
ratchet releases and then allow them to open fully.
If the handles do not open quickly and fully, the
spring is defective and must be replaced. Refer to
Section 5, REPLACEMENT AND REPAIR.
Rev C
相关PDF资料 |
PDF描述 |
|---|---|
| 90202-4 | ASSEMBLY S.A.H.T. |
| 90204-5 | SAHT F CRP 22-26 |
| 90206-3 | ASSY SAHT |
| 90221-2 | SAHT F CRP 20-24 |
| 90227-1 | DAHT F CRIMP 20-24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9018820000 | 制造商:Weidmuller 功能描述:DIE, MTR 110 -EA - Bulk 制造商:Weidmuller 功能描述:DIE MTR 110 |
| 90-188429-12P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188429-12S | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188429-18P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
| 90-188430-99P | 制造商:Amphenol Aerospace 功能描述:RECEPT |
发布紧急采购，3分钟左右您将得到回复。