- 您现在的位置：买卖IC网 > Datasheet目录611 > 90274-2 (TE Connectivity)SAHT F CRIMP Datasheet资料下载
参数资料
| 型号： | 90274-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | SAHT F CRIMP |
| 标准包装： | 1 |
| 系列： | Certi-Crimp, AMPMODU MOD I |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，18-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 配用： | 102103-3-ND - CONN RCPT CONTACT 22-18AWG TIN 102103-2-ND - CONN RCPT CONTACT 22-18AWG GOLD 102104-1-ND - CONN CONTACT 18-22AWG CRIMP 102104-3-ND - CONN RCPT 22-18AWG CRIMP TIN 102104-2-ND - CONN TERM RECEPT 18-22AWAG 30AU |
408-7594
3. CRIMPING PROCEDURE
Refer to the chart in Figure 2 and select wire within the
specified wire size and insulation diameter. Strip the
wire to the length indicated -do NOT cut or nick the
wire strands.
Notice that each crimp section has the applicable wire
size stamped above it. Use this marking and the wire
size that you are using to determine the proper crimp
section.
Select the applicable loose-piece contact and proceed
as follows:
1. Hold the tool so that the back (wire side) is ?
facing you.
2. Make sure that the ratchet is released. Squeeze
the tool handles together and allow them to open
fully.
3. Looking straight into the back of the tool, insert
the contact (insulation barrel first) into the front of
the appropriate crimp section. See Figure 3.
4. Position the contact in the crimpers so that the
locator/insulation stop enters the locator slot of the
contact.
5. Hold the contact in this position and squeeze the
tool handles together until the insulation anvil starts
entry into the insulation crimper. Do NOT deform the
insulation barrel or wire barrel.
6. Insert a properly-stripped wire through the wire
slot of the locator and into the wire barrel of the
contact until the wire insulation butts against the
locator/insulation stop.
7. While holding the wire in place, squeeze the tool
handles together until the ratchet releases.
8. Allow the tool handles to open fully and remove
the crimped contact.
4. INSULATION CRIMP ADJUSTMENT
The insulation barrel crimp height is regulated by the
insulation crimp adjustment lever. To determine the
proper setting, test crimp a contact using the setting
which approximates the insulation size: (1) small, (2)
medium, or (3) large. If the crimped insulation barrel is
too tight or too loose, change the setting accordingly.
The crimp should hold the insulation firmly without
cutting into it.
5. MAINTENANCE/INSPECTION
5.1. Daily Maintenance
Remove all foreign particles with a clean, soft brush or
a clean, soft, lint-free cloth. Make sure the proper
retaining pins are in place and are secured with the
proper retaining rings. If foreign matter cannot be
removed easily, or if the proper replacement parts are
not available, return the tool to your supervisor.
Back of Tool
(Wire Side)
Locator / Insulation Stop
Crimp Section
Wire Size Marking
Contact Support
Insulation Crimper
Locator Slot
in Contact
Stripped Wire
Insulation Anvil
Figure 3
Rev B
2 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 90276-2 | HHHT PIDG PG FASTON 10-12 |
| 90280-1 | DIE PIDG 12-10 |
| 90294-1 | SAHT F CRIMP 22-26 |
| 90308-1 | SAHT LKG CLIP 031X.062 |
| 90313-2 | SAHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 902743M | 制造商:DANAHER TOOL GROUP 功能描述:CHUCK KEY S2 |
| 902-745 | 功能描述:支架与垫片 Plastic Spcr .745 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90275 | 制造商:NTE 制造商全称:NTE Electronics 功能描述:1000V CERAMIC DISC |
| 902-750 | 功能描述:支架与垫片 Plastic Spcr .75 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 902-755 | 功能描述:支架与垫片 Plastic Spcr .755 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。