- 您现在的位置：买卖IC网 > Datasheet目录612 > 90872-1 (TE Connectivity)TOOL CRIMP .093 AWG 24 W/DIE Datasheet资料下载
参数资料
| 型号： | 90872-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/6页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP .093 AWG 24 W/DIE |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III，商用 0.093" |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 矩形触点，18-24 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 241 (CN2011-ZH PDF) |
| 配用： | A25776-ND - CONN SOCKET 18-24AWG GOLD CRIMP A25775-ND - CONN PIN 18-24AWG GOLD CRIMP A14096-ND - CONN SOCKET 18-24AWG TIN CRIMP A14098-ND - CONN PIN 18-24AWG TIN CRIMP |
| 其它名称： | A9817 |
408-9967
Nut
Locator ?
Assembly
Tool Frame
Locator
Chamfer
Wire ?
Crimper
Offset
Wire Anvil
Insulation ?
Anvil
Insulation ?
Crimper
Chamfer
Figure 2
Die Retaining Pins
Die Retaining Screws
The tool features a tool frame with a stationary jaw
and handle, a moving jaw, a moving handle, and an
adjustable ratchet that ensures full contact crimping.
The tool frame holds a die assembly with two crimping
sections.
The die assembly features a wire anvil, an insulation
anvil, a wire crimper, and an insulation crimper.
Attached to the outside of the frame is a locator
assembly, which contains a locator, a spring retainer,
and a contact support.
Die retaining pins and die retaining screws are used to
position and secure the dies in the tool frame. A nut is
used on the upper die retaining screw to hold the
locator assembly in place.
3. INSTALLATION AND REMOVAL OF DIE SET AND
LOCATOR ASSEMBLY
1. Open the tool handles and remove the two die
retaining screws from the tool jaws. See ?
2. Place the wire anvil and insulation anvil so that
their chamfered sides and their marked surfaces
face outward, when mounted in the moving jaw of
the tool frame.
3. Insert the two die retaining pins.
4. Insert the short die retaining screw through the
jaw and through both anvil dies, and tighten the
screw just enough to hold the dies in place. Do
not tighten the screw completely at this time.
Rev D
5. Place the wire crimper and insulation crimper
so that their chamfered sides and their marked
surfaces face outward, when mounted in the
stationary jaw of the tool frame.
7. Insert the long die retaining screw through the
jaw and through both crimper dies, and tighten
the screw just enough to hold the dies in place.
Do not tighten the screw completely at this time.
8. Carefully close the tool handles, making sure
that the anvils and crimpers align properly.
9. Continue closing the tool handles until the
ratchet in the tool frame has engaged sufficiently
to hold the anvils and crimpers in place, then
tighten both die retaining screws.
10. Place the locator assembly over the end of
the long screw, and position the locator assembly
against the side of the tool jaw.
11. Place the nut onto the end of the long screw
and tighten the nut enough to hold the locator
assembly in place, while still allowing the locator
to slide up and down.
12. To disassemble, close the tool handles until
the ratchet releases, remove the nut, the locator
assembly, the two die retaining screws, and the
four die retaining pins, and slide the anvils and
crimpers out of the tool jaws.
2 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| 91002-1 | TOOL INSERTION .062 & .093 CONN |
| 91016-2 | TOOL HAND SPIRAL PIN INSERTION |
| 91017-3 | TOOL AMP-INCERT TAB EXTRACTION |
| 91018-1 | AMP-INCERT TAB EXTRACTION TOOL |
| 91018-2 | AMP-INCERT TAB EXTRACTION TOOL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 90872-1001 | 功能描述:集管和线壳 5mm Rast 2.5 F-Direc -Direct K Nat 3Ckt RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 90872-2 | 功能描述:冲压机与冲模 DIE SET 24-18 .093 PRO CRIMP RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 908-725 | 功能描述:支架与垫片 Plastic Spcr .725 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 908725-000 | 制造商:TE Connectivity 功能描述:PTD-75-M-02 |
| 908725MMX50M | 制造商:3M Electronic Products Division 功能描述:Tape 9087 25 mm x 50 m |
发布紧急采购，3分钟左右您将得到回复。