- 您现在的位置：买卖IC网 > PDF目录18549 > 90872-2 (TE Connectivity)DIE SET 24-18 AWG USE WITH A9996 PDF资料下载
参数资料
| 型号： | 90872-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | DIE SET 24-18 AWG USE WITH A9996 |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 压接或电缆尺寸： | 18-24 AWG |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 产品目录页面： | 241 (CN2011-ZH PDF) |
| 配用： | A25776-ND - CONN SOCKET 18-24AWG GOLD CRIMP A25775-ND - CONN PIN 18-24AWG GOLD CRIMP A14096-ND - CONN SOCKET 18-24AWG TIN CRIMP A14098-ND - CONN PIN 18-24AWG TIN CRIMP |
| 相关产品： | 679304-1-ND - TOOL PNEUMATIC HEAD ASSEMBLY A97885-ND - TOOL HAND CRIMPING SDE PEW 12 A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A9952 |
408-9966
NOTE
i
The ratchet has detents that create audible clicks
as the tool handles are closed.
Adjustment, to verify crimp height before using the
tool to crimp desired contacts and wire sizes.
Refer to the table in Figure 1 and select wire of the
specified size and insulation diameter. Strip the wire to
the length indicated in Figure 1, taking care not to nick
NOTE
i
attempt to crimp an improperly positioned contact.
3. Place a contact with wire into the proper nest and
close the tool handles until the ratchet reaches the
sixt# click, or until the contact support touches the
contact.
4. Slightly loosen the nut that holds the locator
assembly onto the tool frame.
5. Move the contact support as required to eliminate
the bending of the contact.
6. Tighten the nut and close the handles until the
ratchet releases.
7. Remove and inspect the contact.
8. Make another sample crimp. If the contact is
straight, tighten the contact support screw. If the
contact is still being bent during crimping, repeat the
adjustment procedure.
5. CRIMPING PROCEDURE
This tool is provided with a crimp adjustment
feature. Initially, the crimp height should be verified
as specified in Figure 4. Refer to Section 6, Crimp
Height Inspection, and Section 7, RATCHET
or cut wire strands. Select an applicable contact and
identify the appropriate crimp section according to the
wire size markings on the tool. Refer to Figure 3 and
proceed as follows:
1. Hold the tool so that the back (wire side) is facing
you. Squeeze tool handles together and allow them
to open fully.
2. Holding the contact by the mating end, insert the
contact - insulation barrel first - through the front of
the tool and into the appropriate crimp section.
3. Position the contact so that the mating end of the
contact is on the locator side of the tool, and so that
the open "U" of the wire and insulation barrels face
the top of the tool. Place the contact up into the nest
so that the movable locator drops into the slot in the
contact. Refer to Figure 3. Butt the front end of the
wire barrel against the movable locator.
CAUTION Make sure that both sides of the insulation barrel
are started evenly into the crimping section. Do not
!
Adjustment
Screw for Contact
Support
Contact
Support
Locator
Back of Tool
(Wire Side)
Rev C
Wire
Figure 3
Contact
(Typ)
Locator
in Wire
Stop Slot
Strip
Length
Wire
Inserted
to Stop
3 of 6
相关PDF资料 |
PDF描述 |
|---|---|
| DLP0NSN900HL2L | CHOKE COIL COMMON MODE 100MA SMD |
| EEC2E705HQA403 | CAP FILM 7UF 250VAC QC TERM |
| 357B2102MAB251S22 | POT 1.0K OHM 20% SINGLE TURN |
| ASA-85.125MHZ-L-T3 | OSC 85.125 MHZ 3.3V SMD |
| IPC1FAD7/1L0Y | SWITCH PUSHBUTTON SPST 2A 125V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 908-725 | 功能描述:支架与垫片 Plastic Spcr .725 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 908725-000 | 制造商:TE Connectivity 功能描述:PTD-75-M-02 |
| 908725MMX50M | 制造商:3M Electronic Products Division 功能描述:Tape 9087 25 mm x 50 m |
| 908730 | 制造商:NORTH SAFETY PRODUCTS 功能描述:SAFETY SPEC T2400 CLEAR 制造商:North Safety Products USA 功能描述:SAFETY SPEC T2400 CLEAR 制造商:NORTH SAFETY PRODUCTS 功能描述:SAFETY SPEC T2400 CLEAR; Lens Colour:Clear; Frame Colour:Black; Safety Category:EN166.1.F; Lens Colour:Clear; Side Arms Colour:Black; Standard:EN166; Type:Tactile; Wavelength Max:390nm; Weight:0.022kg ;RoHS Compliant: NA |
| 908-730 | 功能描述:支架与垫片 Plastic Spcr .73 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。