- 您现在的位置：买卖IC网 > Datasheet目录612 > 91293-1 (TE Connectivity)CONN COVERS LACING TERMINATION Datasheet资料下载
参数资料
| 型号： | 91293-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | CONN COVERS LACING TERMINATION |
| RoHS指令信息： | 91293-1 Statement of Compliance |
| 标准包装： | 1 |
| 系列： | AMPMODU |
| 附件类型： | 外壳线束固定 |
| 适用于相关产品： | Amplimite 0.050 系列连接器 |
408-9750
3. TOOLING ASSEMBLY SETUP
1. Place the slide body onto the base of the arbor
frame, and align the screw holes in the bottom of
the slide body with the holes in the base. Refer to
2. While holding the slide body in place, tilt the arbor
frame and insert, but do not tighten, the four
mounting screws.
8. Slide the lacing fixture subassembly back against
the slide stop.
Orientation of 68-Position Seating Bars
Toward Back of
Arbor Frame
Assembly
Slide Body
Center
Slots
Socket Head
Cap Screws
Orientation of 68-Position Seating Bars
Mounting Screws
Arbor Frame
Base (Ref)
Figure 3
Figure 2
3. Remove the tool mount from the ram of the arbor
frame assembly, if assembled.
4. Install the proper seating bars for the application
Arbor Frame
Ram (Ref)
Flat Head
Screw
(2 Places)
NOTE
Be sure to locate the tabs on the seating bars
toward the BACK of the arbor frame assembly.
i
5. Place the upper tooling assembly and tool mount
onto the ram, and tighten the flat head screws.
Upper Tooling
Assembly
Tool Mount
NOTE
i
6. Align the slide stop with the appropriate pair of
mounting holes in the slide body, and insert and
The forward-most mounting holes in the slide are
for 26- and 50-position termination covers, and the
rear-most holes are for 68- and 100-position
termination covers.
7. Place the lacing fixture subassembly onto the
Rev D
Figure 4
9. Slowly lower the upper tooling assembly until it
comes in contact with the lacing fixture
subassembly. If the cutting blades strike the
stationary or adjustable locators, then move the
slide assembly until the cutting blades clear the
locators and bottom on the base of the lacing fixture
subassembly.
10. With the upper tooling assembly still lowered
onto the lacing fixture subassembly, tilt the arbor
frame assembly and tighten the slide assembly
mounting screws.
11. Return the arbor frame assembly to the correct
operating position, then carefully raise the ram and
2 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 91302-1 | TOOL CST-100 EXTRACTION |
| 91308-1 | EXT TOOL AMP INNERGY WIRE BRD |
| 91311-2 | 12 ROW HM SEATING TOOL ASSY |
| 91312-1 | 10 ROW HS3 SEATING TOOL ASSY |
| 91318-1 | 12 ROW RECPT SEAT TOOL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 912-931 | 制造商:SPC Multicomp 功能描述:CAPACITOR 100UF 16V |
| 912-935 | 功能描述:支架与垫片 Plastic Spcr .935 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 9129386 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| 9-1293-TR | 制造商:KEYSTONE 功能描述:SCREW TERMINAL ON TAPE & REEL (250PCS) |
| 91294 | 制造商:Amphenol Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。