- 您现在的位置：买卖IC网 > Datasheet目录613 > 91964-2 (TE Connectivity)S.D.E.PREM.DIE ASSY 22-16 PIDG Datasheet资料下载
参数资料
| 型号： | 91964-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/8页 |
| 文件大小： | 0K |
| 描述： | S.D.E.PREM.DIE ASSY 22-16 PIDG |
| 标准包装： | 1 |
| 系列： | * |
SDE Crimping Die
Assemblies 91964-[ ]
Instruction Sheet
408-8732
06 OCT 10 Rev A
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Shoulder
Screw
Insulation
Diameter
PIDG*
Terminal
Indenter
PIDG*
Terminal
Anvil
Insulation
Anvil
1. INTRODUCTION
Figure 1
Insulation
Adjuster
insulation of the wire. The smaller crimping chamber
crimps the center contact onto the center conductor of
the wire. Each die is held in the SDE 1600 power tool
by shoulder screws.
3. DIE INSTALLATION
See Figure 3.
3.1. Die Installation
1. Turn off the SDE 1600 Power Unit and
disconnect it from the power supply.
2. Depress the lever on the power unit to open
the die holders.
3. Install indenter dies in the stationary jaw of the
tool frame. Align the dies with the retaining screw
hole, then secure dies with the die-retaining
screws. Do NOT fully tighten dies.
4. Install anvil dies in the movable jaw of the tool
frame. Align the dies with the retaining screw
hole, then secure dies with the die-retaining
screws. Do NOT fully tighten.
5. Release the lever on the power unit. This
allows spring pressure to close the jaws. The dies
will align themselves.
6. Install the locator assembly (packaged
separately) to the die assembly.
7. Securely tighten the die retaining screws while
the dies are bottomed.
NOTE
i
SDE Premium Crimping Die Assemblies 91964-[ ]
(Figure 1) are designed to crimp the connectors in
Figure 2 onto wire when used in an SDE 1600 Power
Unit 1583034-[ ]. Refer to Figure 2 for a list of
connectors and the appropriate wire sizes.
Refer to instructions packaged with SDE 1600 Power
Unit for information concerning the power unit
1583034-[ ].
Dies are now installed. Die alignment and die
holding screw tightness should be checked at least
twice daily.
3.2. Die Removal
1. Depress the lever on the power unit to open
the die holders.
NOTE
i
Dimensions in this document are in metric units
[with U.S. customary units in brackets].
2. Turn off the SDE 1600 Power Unit and
disconnect it from the power supply.
3. Loosen the die holding screws and remove the
dies.
2. DESCRIPTION
Each crimping die assembly consists of two indenter
dies and two anvil dies, which when closed form two
crimping chambers. The larger crimping chambers
crimp the insulation of the connector onto the
4. CRIMPING PROCEDURE
Select the appropriate wire size and connector. The
wire size and insulation diameter must be within the
specified range for the connector.
?2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-800-722-1111
All Rights Reserved PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 8
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 91965-2 | S.D.E.PREM.DIE ASSY 12-10 PIDG |
| 929013 | KNOCKOUT TOOL |
| 931800-1 | ELEC PWR UNIT W/O F/TRK OR HD |
| 937317-1 | TOOL PUNCH MINI CT PISTOL GRIP |
| 947679-1 | TOOL HAND CRIMPER HE-14 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91-9642-27 | 制造商:GLOBAL MEASUREMENT AND CONTROL 功能描述:WIRE PTFE A YELLOW 7/0.2MM 25M |
| 91964-P2S2 | 制造商:Nuvotem 功能描述:Transformer Toroidal 300VA 2x25V o/p |
| 91965-2 | 功能描述:冲压机与冲模 S.D.E.PREM.DIE ASSY 12-10 PIDG RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 919655 | 制造商:Weidmuller 功能描述:CONN D-SUB F 50 POS SLDR ST PNL MNT 50TERM - Bulk |
| 919655-000 | 制造商:TE Connectivity 功能描述:CBL 1CNDCTR 26AWG 0.81MM SILV PLTD CPPR LGT GRN 600VAC - Cable Rools/Shrink Tubing 制造商:TE Connectivity 功能描述:High Performance Cable 1Conductors 26AWG 0.81mm Silver Plated Copper Light Green 600VAC |
发布紧急采购，3分钟左右您将得到回复。