- 您现在的位置：买卖IC网 > PDF目录21918 > A3250ELTTR (Allegro Microsystems Inc)IC SW HALL EFFECT UNI SOT-89 PDF资料下载
参数资料
| 型号： | A3250ELTTR |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 11/16页 |
| 文件大小： | 300K |
| 描述： | IC SW HALL EFFECT UNI SOT-89 |
| 标准包装： | 1,000 |
| 传感范围： | 50G |
| 类型： | 单极开关 |
| 电源电压： | 4.2 V ~ 24 V |
| 电流 - 电源： | 10mA |
| 电流 - 输出（最大）： | 20mA |
| 输出类型： | 数字，开路集电极 |
| 特点： | 稳压电压 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | TO-243AA |
| 供应商设备封装： | SOT-89-3 |
| 包装： | 带卷 (TR) |
Field-Programmable, Chopper-Stabilized,
Unipolar Hall-Effect Switches
A3250 and
A3251
10
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
The pulse sequences consist of the following groups of pulses:
1. An enable sequence.
2. A bitfield address sequence.
3. When permanently setting the bitfield, a long V
PH
fuse-blow-
ing pulse. (Note: Blown bit fuses cannot be reset.)
4. When permanently setting the bitfield, the level of V
CC
must
be allowed to drop to zero between each pulse sequence, in
order to clear all registers. However, when provisionally set-
ting bitfields, V
CC
must be maintained at V
PL
between pulse
sequences, in order to maintain the prior bitfield settings while
preparing to set additional bitfields.
Bitfields that are not set are evaluated as zeros. The bitfield-level
fuses for 0 value bitfields are never blown. This prevents inad-
vertently setting the bitfield to 1. Instead, blowing the device-
level fuse protects the 0 bitfields from being accidentally set in
the future.
When provisionally trying the calibration value, one pulse
sequence is used, using decimal values. The sequence for setting
the value 5
10
is shown in figure 2.
When permanently setting values, the bitfields must be set indi-
vidually, and 5
10
must be programmed as binary 101. Bit 3 is
set to 1 (000100
2
, which is 4
10
), then bit 1 is set to 1 (000001
2
,
which is 1
10
). Bit 2 is ignored, and so remains 0.Two pulse
sequences for permanently setting the calibration value 5 are
shown in figure 3. The final V
PH
pulse is maintained for a longer
period, enough to blow the corresponding bitfield-level fuse.
V
PH
V+
t
V
PM
V
PL
0
Encode 00100
2
(4
10
)
Enable
Address
Address
Blow
Blow
Enable
Encode 00001
2
(1
10
)
Figure 3. Pulse sequence to permanently encode calibration value 5 (101 binary, or
bitfield address 3 and bitfield address 1).
V
PH
V+
t
V
PM
V
PL
0
Try 5
10
Enable
Address
Clear
Optional
Monitoring
Figure 2. Pulse sequence to provisionally try calibration value 5.
相关PDF资料 |
PDF描述 |
|---|---|
| F1842RD1600 | MODULE DIODE 40A 600VAC |
| F1842CCD1600 | MODULE DIODE 40A 600VAC |
| 6106 | PROTO-BRD 6PIN DISCRETE SMD SIP |
| D2HW-BR273M | SUBMINIATURE BASIC SWITCH |
| 6006 | PROTO-BRD 6PIN DISCRETE SMD SIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3250ELTTR-T | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Field-Programmable, Chopper-Stabilized Unipolar Hall-Effect Switches |
| A3250EUA | 功能描述:IC SW HALL EFFECT UNI 3-SIP RoHS:否 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR |
| A3250EUA-T | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Field-Programmable, Chopper-Stabilized Unipolar Hall-Effect Switches |
| A3250JUA | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Field-Programmable, Chopper-Stabilized Unipolar Hall-Effect Switches |
| A3250JUATL | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Field-Programmable, Chopper-Stabilized Unipolar Hall-Effect Switches |
发布紧急采购，3分钟左右您将得到回复。