- 您现在的位置：买卖IC网 > PDF目录18569 > A3CJ-90A1-05ER (Omron Electronics Inc-IA Div)SWITCH PUSHBUTTON SPDT 1A 125V PDF资料下载
参数资料
| 型号： | A3CJ-90A1-05ER |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 12/14页 |
| 文件大小： | 0K |
| 描述： | SWITCH PUSHBUTTON SPDT 1A 125V |
| 标准包装： | 1 |
| 系列： | A3C |
| 类型： | 标准，发光式 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 额定电流： | 1A（AC/DC） |
| 额定电压 - AC： | 125V |
| 额定电压 - DC： | 30V |
| 触动器类型： | 矩形，按钮 |
| 颜色 - 致动器/盖： | 红 |
| 发光类型，颜色： | LED，红 |
| 发光电压： | 5 VDC |
| 安装类型： | 前面板安装 |
| 端接类型： | 焊片 |
| 防护等级： | IP40 |
| 面板切口尺寸： | 圆形 - 直径 12.00mm |
| 包装： | 散装 |
| 工作温度： | -10°C ~ 55°C |
| 机械寿命： | 1,000,000 次循环 |
| 电气寿命： | 100,000 次循环 |
| 相关产品： | A3CJ-500Y-ND - LAMP/LED PUSHBUTTON A3CJ-500W-ND - LAMP/LED PUSHBUTTON A3CJ-500R-ND - LAMP/LED PUSHBUTTON A3CJ-500GY-ND - LAMP/LED PUSHBUTTON A3CJ-500G-ND - LAMP PUSHBUTTON A3CJ-500A-ND - LAMP PUSHBUTTON |
| 其它名称： | A3CJ90A105ER A3CJ90A105ERNC |
A3C
Safety Precautions
Refer to Safety Precautions for All Pushbutton Switches .
CAUTION
Do not apply a voltage higher than the maximum
rated operating voltage between the lamp terminals,
as there is a risk that the incandescent lamp or LED
lamp will be damaged, and the Pushbutton will be
ejected.
When replacing the incandescent lamp, first turn OFF
the power supply, and then wait 10 minutes before
performing replacement, as the lamp is still hot
immediately after the power is turned OFF, so there
is a risk of burns.
Precautions for Correct Use
Mounting
Using Microloads
? Using a standard load switch for opening and closing a microload
circuit may cause wear on the contacts. Use the switch within the
operating range. (Refer to the diagram below.) Even when using
microload models within the operating range shown below, if inrush
current occurs when the contact is opened or closed, it may cause
the contact surface to become rough, and so decrease life
expectancy. Therefore, insert a contact protection circuit where
necessary. The minimum applicable load is the N-level reference
value. This value indicates the malfunction reference level for the
reliability level of 60% ( λ 60) (conforming to JIS C5003). The
equation, λ 60 = 0.5 x 10 ? 6 /times indicates that the estimated
malfunction rate is less than 1/2,000,000 with a reliability level of
60%.
? To prevent electric shock or a fire, always make sure that the power
is turned OFF before mounting, removing, or wiring the Switch, or
30
0.15mA
26mA
100mA
performing maintenance.
? Do not tighten the mounting ring excessively using pliers or a similar
24
tool. Excessive tightening may damage the mounting ring.
(Tightening torque: 0.20 to 0.39 N·m {20 gf to 40 gf})
Wiring
Microload
area
Standard
load area
? When wiring, use wires of a size appropriate for the applied voltage
and carry current. Perform soldering correctly under the conditions
given below. Using the Switch with the wires soldered incorrectly
12
Invalid
area
may cause the terminals to become abnormally hot and cause a
fire.
5
1mA
100mA 150mA
1. Soldering iron tip temperature: 350 ° C max. within 3 seconds.
2. Dip soldering: At 350 ° C within 3 seconds.
0
0.1
1
10
100 1,000
Current (mA)
Wait for one minute after soldering before exerting any external
force on the solder.
? Use a non-corrosive rosin liquid for the flux.
? Perform wiring so that the wire sheaths do not come into contact
with the Switch. If this is unavoidable, use wires that can withstand
LED
? Resistance to limit the LED current is provided internally and so an
external resistance is not required.
temperatures of 100 ° C min.
? After wiring to the Switch has been completed, ensure an
appropriate insulation distance.
Operating Environment
? Do not use in locations that are subject to dust, oil, or metal filings
Rated voltage
5 VDC
12 VDC
24 VDC
Internal limiting resistance
33 Ω
270 Ω
1,600 Ω
as these may penetrate the interior of the Switch and cause
malfunction.
12
相关PDF资料 |
PDF描述 |
|---|---|
| ACHL-25.000MHZ-EK | OSCILLATOR 25.000MHZ 3.3V 1/2-SZ |
| 3352K-1-501LF | POT 500 OHM THUMBWHEEL CERM ST |
| 3352K-1-500LF | POT 50 OHM THUMBWHEEL CERM ST |
| A3CA-90B1-12EW | SWITCH PUSHBUTTON SPDT 1A 125V |
| ABLS-LR-15.000MHZ-T | CRYSTAL 15.000MHZ 18PF LOW ESR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3CJ90A105ERNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSHBUTTON SPDT 1A 125V |
| A3CJ90A105EY | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSHBUTTON SPDT 1A 125V 制造商:Omron Corporation 功能描述:Lighted Pushbutton Switch |
| A3CJ-90A1-05EY | 功能描述:按钮开关 Lighted Pushbutton Switch RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
| A3CJ90A112EY | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:ASSEMBLED LIGHTED PUSHBUTTON |
| A3CJ-90A1-12EY | 功能描述:按钮开关 ASSEMBLED LIGHTED PUSHBUTTON RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
发布紧急采购，3分钟左右您将得到回复。