- 您现在的位置：买卖IC网 > PDF目录18569 > A3CJ-90A1-05ER (Omron Electronics Inc-IA Div)SWITCH PUSHBUTTON SPDT 1A 125V PDF资料下载
参数资料
| 型号： | A3CJ-90A1-05ER |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 13/14页 |
| 文件大小： | 0K |
| 描述： | SWITCH PUSHBUTTON SPDT 1A 125V |
| 标准包装： | 1 |
| 系列： | A3C |
| 类型： | 标准，发光式 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 额定电流： | 1A（AC/DC） |
| 额定电压 - AC： | 125V |
| 额定电压 - DC： | 30V |
| 触动器类型： | 矩形，按钮 |
| 颜色 - 致动器/盖： | 红 |
| 发光类型，颜色： | LED，红 |
| 发光电压： | 5 VDC |
| 安装类型： | 前面板安装 |
| 端接类型： | 焊片 |
| 防护等级： | IP40 |
| 面板切口尺寸： | 圆形 - 直径 12.00mm |
| 包装： | 散装 |
| 工作温度： | -10°C ~ 55°C |
| 机械寿命： | 1,000,000 次循环 |
| 电气寿命： | 100,000 次循环 |
| 相关产品： | A3CJ-500Y-ND - LAMP/LED PUSHBUTTON A3CJ-500W-ND - LAMP/LED PUSHBUTTON A3CJ-500R-ND - LAMP/LED PUSHBUTTON A3CJ-500GY-ND - LAMP/LED PUSHBUTTON A3CJ-500G-ND - LAMP PUSHBUTTON A3CJ-500A-ND - LAMP PUSHBUTTON |
| 其它名称： | A3CJ90A105ER A3CJ90A105ERNC |
A3C
Application
Mounting and Replacing the Pushbutton
(1) Mounting Direction for the Pushbutton/Display and Lamp
Lighted Pushbutton Switch
? Insert the Lamp (incandescent lamp or LED lamp) into the
Pushbutton so that the lamp guide fits into the wider gap between
the projections on the Pushbutton.
Panel Mounting
? Insert the Switch from the front of the panel. Mount the mounting
nut from the terminal end of the Switch and tighten it.
? There are projections on the terminal end of the Switch which may,
depending on the orientation, block the nut. In this case, turn the nut
until it is possible to mount it. Tighten the nut to a torque between
0.20 and 0.39 N·m.
Projection s
LED/l a mp g u ide
LED/l a mp g u ide
? If soldering is used, mount the mounting nut first. Lead wires and
mounds of solder may make it impossible to mount the nut after
soldering.
Mounting nut
Panel
Indicator
? With Indicators, the Lamp is inserted facing the opposite direction
(i.e., at 180 ° ) to that for Lighted Pushbutton Switches.
Groove of the Display
LED/lamp guide
Socket Mounting
? After securing the Switch to the panel using the mounting nut, insert
the Socket into the Switch.
? Align the positioning holes of the Socket with the projections of the
Switch before inserting the Socket.
Projection of the LED/lamp
Note: Push the projections on the Lamp into the grooves on the Pushbutton/
Display.
The Lamp for Lighted Pushbutton Switches moves, but the Lamp for
Indicators is fixed.
Panel
Projection
of the Switch
(2) Mounting Direction for the Pushbutton/Display and Switch
? Insert the Pushbutton/Display into the Switch so that the lamp guide
is aligned with the non-projecting part of the Switch.
? Apply a pressure between 9.8 and 24.5 N.
Positioning
hole of the Socket
Projection
of the Switch
Mounting the Insulation Cover
? After securing the Switch to the panel using the mounting nut, pass
Note: 1. The mounting direction for Indicators is 180 ° to that for Lighted
Pushbutton Switches. Be sure to insert the Legend Plate and other
parts with the correct orientation.
2. If the terminals of the Lamp become bent, it may be impossible to fit
them into the lamp terminal holes. Ensure that the terminals are
straight when they are inserted.
3. Take particular care about the mounting direction with the round
models (A3CT).
(3) Removing the Pushbutton/Display
the lead wires through the holes in the Insulation Cover and then
perform wiring. Hold the Insulation Cover so that the cylindrical hole
is facing the Switch, and insert the lead wires from the end with the
barriers.
? After wiring is completed, mount the Insulation Cover by pushing it
into the Switch.
Insulation Cover attached to Switch
Switch terminal
Hold the recessed portions on the cap of the Pushbutton and pull.
Rece ss
Note: Do not use tools such as pliers to remove the Pushbutton as this may
damage the cap.
13
相关PDF资料 |
PDF描述 |
|---|---|
| ACHL-25.000MHZ-EK | OSCILLATOR 25.000MHZ 3.3V 1/2-SZ |
| 3352K-1-501LF | POT 500 OHM THUMBWHEEL CERM ST |
| 3352K-1-500LF | POT 50 OHM THUMBWHEEL CERM ST |
| A3CA-90B1-12EW | SWITCH PUSHBUTTON SPDT 1A 125V |
| ABLS-LR-15.000MHZ-T | CRYSTAL 15.000MHZ 18PF LOW ESR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3CJ90A105ERNC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSHBUTTON SPDT 1A 125V |
| A3CJ90A105EY | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH PUSHBUTTON SPDT 1A 125V 制造商:Omron Corporation 功能描述:Lighted Pushbutton Switch |
| A3CJ-90A1-05EY | 功能描述:按钮开关 Lighted Pushbutton Switch RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
| A3CJ90A112EY | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:ASSEMBLED LIGHTED PUSHBUTTON |
| A3CJ-90A1-12EY | 功能描述:按钮开关 ASSEMBLED LIGHTED PUSHBUTTON RoHS:否 制造商:C&K Components 触点形式:2 NC - 2 NO 开关功能:ON ? OFF 电流额定值:4 A 电压额定值 AC:12 V to 250 V 电压额定值 DC:12 V to 50 V 功率额定值: 安装风格:Through Hole 照明:Illuminated 照明颜色:None IP 等级:IP 40 端接类型:Solder 触点电镀:Silver 执行器:Square 盖颜色: 封装: 可燃性等级:UL 94 V-0 |
发布紧急采购，3分钟左右您将得到回复。