参数资料
型号: AC164142
厂商: Microchip Technology
文件页数: 22/38页
文件大小: 0K
描述: BOARD DAUGHTER PWR LINE MODEM
特色产品: AC164142 PICtail? Plus Daughter Board
标准包装: 1
系列: PICtail™ Plus
主要目的: 接口,电源线路收发器
嵌入式:
主要属性: AC 电源线收发器,BPSK 7.2 Kbps
次要属性: 需要 Explorer 16 板
已供物品: 2 板,线缆,文档
Consumer-band BPSK 7.2 kbps PLM PICtail? Plus Daughter Board User’s Guide
PLM_MOD_IMP
This setting selects the number of OC channels dedicated for PWM-based signal
generation. Available options are:
? MOD_DDS: Directly calculates sine samples. No real-world output (for
demodulator testing with internal loopback)
? MOD_PWM: Uses single OC channel (not recommended)
? MOD_2PWM: Uses two OC channels
? MOD_4PWM: Uses four OC channels (default)
PLM_SOFT_AGC
This setting enables software automatic gain control. In most cases it should be
enabled. It may be disabled if the hardware gain guarantees that the working signal will
always touch power supply rails. If the input signal is small and the software AGC is
disabled, the Costas loop will not get enough feedback and the digital PLL may fall out
of synchronization.
PLM_COSTAS_FB
This setting allows the selection of a Costas loop feedback filter implementation. The
filter is actually implemented as a regulator. Three options are available:
? direct (equivalent to a P controller)
? PI
? PID
Tests show that the PI implementation brings the best performance. The proportional
term is responsible for the phase synchronization, while the integral term allows
tracking in the event of a constant frequency offset.
3.1.4
API Functions
The modem API allows for very low level access to the modulator and demodulator
code. The application communicates with the modem on a buffer level and the modem
itself does not impose any buffer sizes, frames or protocols. All of these features can
be freely implemented in the higher layers. All low-level API functions are declared in
the header file ( ...modem\common\plm.h ) and are C-callable. The following functions
are available:
plm_mod_start()
This function starts the modulator and configures the Output Compare channel(s),
starts Timer2 and enables the Timer2 interrupt. It is mandatory to call this function
before any calls to plm_xmit() are made.
plm_demod_start()
This function starts the demodulator and configures the selected ADC channel, starts
the timer that triggers ADC conversions and optionally enables a DMA channel to ser-
vice the selected ADC input. Either DMA or ADC and timer interrupts get enabled. It is
mandatory to call this function before any calls to plm_recv() are made.
plm_demod_sync()
This function forces a demodulator resynchronization and may be called in cases when
the demodulator keeps indicating bit and byte synchronization, but higher protocol lay-
ers decide that the patterns received do not form valid frames, thus suggesting that the
byte synchronization is misaligned.
DS70656A-page 22
? 2011 Microchip Technology Inc.
相关PDF资料
PDF描述
AC164144 LLC PICTAIL PLUS DAUGHTR BRD
AC164145 BOARD DAUGHTER PWR LINE MODEM
AC243005-1 KIT MEMORY SERIAL SUPERFLASH 1
AC244002 PAK PERFORMANCE MPLAB REAL ICE
AC244005 KIT MPLAB REAL ICE ISOLATOR
相关代理商/技术参数
参数描述
AC164143 功能描述:子卡和OEM板 PICtail/PICtail Plus Daughter Board RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
AC164143-1 功能描述:DAUGHTER BD MRF24J40ME PICTAIL/+ 制造商:microchip technology 系列:PICtail?? Plus 零件状态:有效 类型:收发器; 802.15.4(ZigBee?) 频率:2.4GHz 配套使用产品/相关产品:MRF24J40 所含物品:板 标准包装:1
AC164144 功能描述:显示开发工具 LCC Graphics PICtail Plus Board RoHS:否 制造商:4D Systems 产品:4Display Shields 工具用于评估:?OLED-160-G1, ?OLED-160-G2 接口类型:Serial 工作电源电压:5 V
AC164145 功能描述:子卡和OEM板 PICtail + Daughter Board Dev Kit RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
AC164147 功能描述:时钟和定时器开发工具 MCP795XX SPI RTCC PICtail Daughter Brd RoHS:否 制造商:Texas Instruments 产品:Evaluation Modules 类型:Clock Conditioners 工具用于评估:LMK04100B 频率:122.8 MHz 工作电源电压:3.3 V