- 您现在的位置：买卖IC网 > PDF目录68990 > ACPM-7813-BLK (AGILENT TECHNOLOGIES INC) 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | ACPM-7813-BLK |
| 厂商： | AGILENT TECHNOLOGIES INC |
| 元件分类： | 放大器 |
| 英文描述： | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| 封装： | 4 X 4 MM, 1.10 MM HEIGHT, SMT, 10 PIN |
| 文件页数： | 8/21页 |
| 文件大小： | 183K |
| 代理商： | ACPM-7813-BLK |
16
ACPR Test Results using Spectrum Analyzer
The meaning of 16 dB
The accurate ACPR measurement
using Spectrum Analyzer needs
to consider the normalization
factor that is dependent on the
Resolution Bandwidth, RBW,
settings. The above figure (mea-
surement shown at 836 MHz for
general example) shows a com-
parison of the different ACPR
measurement results as a func-
tion of various RBW values. As
the RBW is reduced, less power is
captured during the measure-
ment and consequently the
channel power is recorded as a
Figure 21. Example ACPR measurement using Spectrum Analyzer.
smaller value. For example, if the
main channel power is measured
as 28 dBm in a 1.23 MHz band-
width, its power spectral density
is 28 dBm/1.23 MHz, which can
be normalized to 11.87 dBm/
30 kHz. The equation used to
calculate the normalization factor
of power spectral density is:
Normalization Factor =
10log[Normalization BW/Current BW
(Spectrum Analyzer RBW)]
= 10log[1.23X10
6/30X103]
= 16.13 dB
Since the ACPR in an IS95
system is specified in a 1.23 MHz
bandwidth, a channel power that
is measured using a different
RBW, can be normalized to
reflect the channel power as if it
was measured in a 1.23 MHz
bandwidth. The difference in
channel power measured in
30 kHz bandwidth and the
channel power measured in a
1.23 MHz bandwidth is 16 dB.
REF 42.8 dBm
AT 30 dB
RBW = 1.0 MHz
RBW = 30 kHz
RBW = 300 kHz
Mkr 836 MHz
35.42 dBm
Center 836 MHz
VBW 100 kHz
Span 5.000 MHz
SWP 2.00 sec
相关PDF资料 |
PDF描述 |
|---|---|
| ACPM-7813-TR1 | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AD8339ACPZ-R7 | 0 MHz - 50 MHz RF/MICROWAVE I/Q DEMODULATOR |
| AD8339ACPZ-RL | 0 MHz - 50 MHz RF/MICROWAVE I/Q DEMODULATOR |
| AD8339ACPZ | 0 MHz - 50 MHz RF/MICROWAVE I/Q DEMODULATOR |
| ADL5374ACPZ-WP | 3000 MHz - 4000 MHz RF/MICROWAVE QUADRAPHASE MODULATOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACPM-7813-TR1 | 功能描述:射频放大器 CDMA Amp 824-849MHz RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| ACPM-7821 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7821-BLK | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7821-TR1 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:4 x 4 Power Amplifier Module for J-CDMA (898 - 925 MHz) |
| ACPM-7822 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:JCDMA 4x4 Power Amplifier Module (898-925MHz) |
发布紧急采购，3分钟左右您将得到回复。