- 您现在的位置：买卖IC网 > PDF目录97841 > ACPM-7822-BLK 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | ACPM-7822-BLK |
| 元件分类： | 放大器 |
| 英文描述： | 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| 封装： | 4 X 4 MM, 0.90 MM HEIGHT, GREEN, PLASTIC, SMT, 10 PIN |
| 文件页数： | 2/13页 |
| 文件大小： | 1112K |
| 代理商： | ACPM-7822-BLK |
10
Handling and Storage
ESD (Electrostatic Discharge)
Electrostatic discharge occurs naturally in the environ-
naturally in the environ-
ment. With the increase in voltage potential, the outlet of
neutralization or discharge will be sought. If the acquired
discharge route is through a semiconductor device, de-
through a semiconductor device, de-
de-
structive damage will result.
ESD countermeasure methods should be developed and
used to control potential ESD damage during handling in
a factory environment at each manufacturing site.
MSL (Moisture Sensitivity Level)
Plastic encapsulated surface mount package is sensitive to
damage induced by absorbed moisture and temperature.
Avago Technologies follows JEDEC Standard J-STD 020B.
Each component and package type is classified for
moisture sensitivity by soaking a known dry package at
various temperatures and relative humidity, and times.
Moisture Classification Level and Floor Life
MSL Level
Floor Life (out of bag) at factory ambient =< 30°C/60% RH or as stated
1
Unlimited at =< 30°C/85% RH
2
1 year
2a
4 weeks
3
168 hours
4
72 hours
5
48 hours
5a
24 hours
6
Mandatory bake before use. After bake, must be reflowed within the time limit specified on the label
Note :
1. The MSL Level is marked on the MSL Label on each shipping bag.
After soak, the components are subjected to three con-
secutive simulated reflows.
The out of bag exposure time maximum limits are deter-
mined by the classification test describe below which cor-
responds to a MSL classification level 6 to 1 according to the
JEDEC standard IPC/JEDEC J-STD-020B and J-STD-033.
ACPM-7822 is MSL3. Thus, according to the J-STD-033
p.11 the maximum Manufacturers Exposure Time (MET)
for this part is 168 hours. After this time period, the part
would need to be removed from the reel, de-taped and
then re-baked. MSL classification reflow temperature for
the ACPM-7822 is targeted at 260°C +0/-5°C. Figure and
table on next page show typical SMT profile for maximum
temperature of 260 +0/-5°C.
相关PDF资料 |
PDF描述 |
|---|---|
| ACPM-7822-TR1 | 898 MHz - 925 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| ACPM-7833-BLK | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7833-TR1 | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7833-BLK | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7833-TR1 | 1850 MHz - 1910 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACPM-7822-TR1 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:JCDMA 4x4 Power Amplifier Module (898-925MHz) |
| ACPM-7831-BLK | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Amplifier. Other |
| ACPM-7831-TR1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Amplifier. Other |
| ACPM-7833 | 制造商:AGILENT 制造商全称:AGILENT 功能描述:CDMA1900 (PCS) Power Amplifier Module |
| ACPM-7833-BLK | 功能描述:射频放大器 CDMA Amp 1850-1910MHz RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。