- 您现在的位置：买卖IC网 > Datasheet目录393 > ACS716KLATR-6BB-NL-T (Allegro Microsystems Inc)IC CURRENT SENSOR 120KHZ 16-SOIC Datasheet资料下载
参数资料
| 型号： | ACS716KLATR-6BB-NL-T |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 19/22页 |
| 文件大小： | 0K |
| 描述： | IC CURRENT SENSOR 120KHZ 16-SOIC |
| 标准包装： | 1,000 |
| 电流 - 感应： | ±6A |
| 精确度： | ±1.6% |
| 灵敏度： | 151mV/A |
| 电流 - 电源： | 11mA |
| 传感器类型： | 霍尔效应 |
| 电源电压： | 3 V ~ 5.5 V |
| 输出： | 2.5V |
| 频率： | 120kHz |
| 响应时间： | 4µs |
| 电极标记： | 双向 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 16-SMD |
| 包装： | 标准包装 |
ACS716
120 kHz Bandwidth, High Voltage Isolation
Current Sensor with Integrated Overcurrent Detection
Definitions of Accuracy Characteristics
{ [ [{
V IOUT _full-scale amperes – V IOUT(Q)
2 ( V IOUT _1/2 full-scale amperes – V IOUT(Q) )
?
?
?
?
Sensitivity (Sens). The change in sensor output in response to a
1 A change through the primary conductor. The sensitivity is the
product of the magnetic circuit sensitivity (G / A) and the linear
IC amplifier gain (mV/G). The linear IC amplifier gain is pro-
grammed at the factory to optimize the sensitivity (mV/A) for the
full-scale current of the device.
Noise (V NOISE ). The product of the linear IC amplifier gain
(mV/G) and the noise floor for the Allegro Hall effect linear
IC. The noise floor is derived from the thermal and shot noise
observed in Hall elements. Dividing the noise (mV) by the sensi-
tivity (mV/A) provides the smallest current that the device is able
to resolve.
Linearity (E LIN ). The degree to which the voltage output from
the sensor varies in direct proportion to the primary current
through its full-scale amplitude. Nonlinearity in the output can be
attributed to the saturation of the flux concentrator approaching
the full-scale current. The following equation is used to derive the
linearity:
100 1–
where V IOUT_full-scale amperes = the output voltage (V) when the
sensed current approximates full-scale ±I P .
Symmetry (E SYM ). The degree to which the absolute voltage
output from the sensor varies in proportion to either a positive
or negative full-scale primary current. The following formula is
used to derive symmetry:
Accuracy is divided into four areas:
?? 0 A at 25°C. Accuracy of sensing zero current flow at 25°C,
without the effects of temperature.
?? 0 A over Δ temperature. Accuracy of sensing zero current
flow including temperature effects.
?? Full-scale current at 25°C. Accuracy of sensing the full-scale
current at 25°C, without the effects of temperature.
?? Full-scale current over Δ temperature. Accuracy of sensing full-
scale current flow including temperature effects.
Ratiometry . The ratiometric feature means that its 0 A output,
V IOUT(Q) , (nominally equal to V CC /2) and sensitivity, Sens, are
proportional to its supply voltage, V CC . The following formula is
used to derive the ratiometric change in 0 A output voltage,
? V IOUT(Q)RAT (%).
V IOUT(Q)VCC / V IOUT(Q)3.3V
100
V CC / 3.3 (V)
The ratiometric change in sensitivity, ? Sens RAT (%), is defined as:
Sens VCC / Sens 3.3 V
100
V CC / 3.3 (V)
Output Voltage versus Sensed Current
Accuracy at 0 A and at Full-Scale Current
Increasing V IOUT (V)
? ?
100
V IOUT _+ full-scale amperes – V IOUT(Q )
V IOUT(Q) – V IOUT _–full-scale amperes
Accuracy
25°C Only
Accuracy
O v e r Temp erature
Quiescent output voltage (V IOUT(Q) ). The output of the sensor
when the primary current is zero. For a unipolar supply voltage,
Average
V IOUT
it nominally remains at 0.5×V CC . For example, in the case of a
bidirectional output device, V CC = 3.3 V translates into V IOUT(Q)
= 1.65 V. Variation in V IOUT(Q) can be attributed to the resolution
of the Allegro linear IC quiescent voltage trim and thermal drift.
I P (min)
Accuracy
O v e r Temp erature
Accuracy
25°C Only
Electrical offset voltage (V OE ). The deviation of the device out-
put from its ideal quiescent voltage due to nonmagnetic causes.
To convert this voltage to amperes, divide by the device sensitiv-
–I P (A)
Full Scale
I P (max)
+I P (A)
ity, Sens.
Accuracy (E TOT ). The accuracy represents the maximum devia-
tion of the actual output from its ideal value. This is also known
as the total ouput error. The accuracy is illustrated graphically in
the output voltage versus current chart at right. Note that error is
directly measured during final test at Allegro.
Accuracy
25°C Only
Accuracy
O v e r Temp erature
0A
Decreasing V IOUT (V)
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
19
相关PDF资料 |
PDF描述 |
|---|---|
| ACS750SCA-050 | SENSOR CURRENT 50A 5V BI 5-CA |
| ACS756SCA-100B-PFF-T | IC HALL EFFECT SENSOR MOD 5PIN |
| ACS758KCB-150U-PFF-T | IC SENSOR CURRENT 150A UNI 3-CB |
| ACS759LCB-100B-PFF-T | SENSOR CURRENT |
| ADP1271 | SENSOR PRESSURE 490.3KPA STD DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ACS716KLATR-6BB-T | 功能描述:IC CURRENT SENSOR 120KHZ 16SOIC RoHS:是 类别:传感器，转换器 >> 电流 系列:- 标准包装:10 系列:* |
| ACS716KLATR-9BB-NL-T | 功能描述:Current Sensor 9A 1 Channel Hall Effect, Open Loop Bidirectional 16-SOIC (0.295", 7.50mm Width) 制造商:allegro microsystems, llc 系列:- 包装:带卷（TR） 零件状态:有效 用于测量:AC/DC 传感器类型:霍尔效应，开环 电流 - 检测:9A 通道数:1 输出:比率，电压 灵敏度:60mV/A 频率:DC ~ 120kHz 线性度:±0.25% 精度:±2.5% 电压 - 电源:3 V ~ 3.6 V 响应时间:4μs 电流 - 电源（最大值）:11mA 工作温度:-40°C ~ 125°C 极化:双向 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 标准包装:1,000 |
| ACS717KMATR-10B-T | 功能描述:Current Sensor 10A 1 Channel Hall Effect, Open Loop Bidirectional 16-SOIC (0.295", 7.50mm Width) 制造商:allegro microsystems, llc 系列:- 包装:剪切带（CT） 零件状态:有效 用于测量:AC/DC 传感器类型:霍尔效应，开环 电流 - 检测:10A 通道数:1 输出:比率，电压 灵敏度:132mV/A 频率:40kHz 线性度:±1% 精度:±2% 电压 - 电源:3 V ~ 3.6 V 响应时间:13μs 电流 - 电源（最大值）:7.5mA 工作温度:-40°C ~ 125°C 极化:双向 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 标准包装:1 |
| ACS717KMATR-20B-T | 功能描述:Current Sensor 20A 1 Channel Hall Effect, Open Loop Bidirectional 16-SOIC (0.295", 7.50mm Width) 制造商:allegro microsystems, llc 系列:- 包装:剪切带（CT） 零件状态:有效 用于测量:AC/DC 传感器类型:霍尔效应，开环 电流 - 检测:20A 通道数:1 输出:比率，电压 灵敏度:66mV/A 频率:40kHz 线性度:±1% 精度:±2% 电压 - 电源:3 V ~ 3.6 V 响应时间:13μs 电流 - 电源（最大值）:7.5mA 工作温度:-40°C ~ 125°C 极化:双向 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 标准包装:1 |
| ACS718KMATR-10B-T | 功能描述:Current Sensor 10A 1 Channel Hall Effect, Open Loop Bidirectional 16-SOIC (0.295", 7.50mm Width) 制造商:allegro microsystems, llc 系列:- 包装:剪切带（CT） 零件状态:有效 用于测量:AC/DC 传感器类型:霍尔效应，开环 电流 - 检测:10A 通道数:1 输出:比率，电压 灵敏度:200mv/A 频率:40kHz 线性度:±1% 精度:±2% 电压 - 电源:5V 响应时间:13μs 电流 - 电源（最大值）:9mA 工作温度:-40°C ~ 125°C 极化:双向 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。