参数资料
| 型号： | AD215AY |
| 厂商： | Analog Devices Inc |
| 文件页数： | 1/12页 |
| 文件大小： | 0K |
| 描述： | IC AMP ISOL LDIST 5MA 44SIP |
| 标准包装： | 1 |
| 放大器类型： | 隔离 |
| 电路数： | 1 |
| 转换速率： | 6 V/µs |
| -3db带宽： | 120kHz |
| 电流 - 输入偏压： | 300pA |
| 电压 - 输入偏移： | 400µV |
| 电流 - 电源： | 40mA |
| 电流 - 输出 / 通道： | 5mA |
| 电压 - 电源，单路/双路(±)： | ±14.25 V ~ 17 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 44-SIP，12 引线，偏移引线 |
| 供应商设备封装： | 12-SIP |
| 包装： | 管件 |
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
a
120 kHz Bandwidth, Low Distortion,
Isolation Amplifier
AD215
Analog Devices, Inc., 1996
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 617/329-4700
Fax: 617/326-8703
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Isolation Voltage Rating: 1,500 V rms
Wide Bandwidth: 120 kHz, Full Power (–3 dB)
Rapid Slew Rate: 6 V/ s
Fast Settling Time: 9
s
Low Harmonic Distortion: –80 dB @ 1 kHz
Low Nonlinearity:
0.005%
Wide Output Range:
10 V, min (Buffered)
Built-in Isolated Power Supply:
15 V dc @
10 mA
Performance Rated over –40 C to +85 C
APPLICATIONS INCLUDE
High Speed Data Acquisition Systems
Power Line and Transient Monitors
Multichannel Muxed Input Isolation
Waveform Recording Instrumentation
Power Supply Controls
Vibration Analysis
Flexible Input and Buffered Output Stages: An uncommit-
ted op amp is provided on the input stage of the AD215 to
allow for input buffering or amplification and signal condition-
ing. The AD215 also features a buffered output stage to drive
low impedance loads and an output voltage trim for zeroing the
output offset where needed.
High Accuracy: The AD215 has a typical nonlinearity of
±0.005% (B grade) of full-scale range and the total harmonic
distortion is typically –80 dB at 1 kHz. The AD215 provides
designers with complete isolation of the desired signal without
loss of signal integrity or quality.
Excellent Common-Mode Performance: The AD215BY
(AD215AY) provides 1,500 V rms (750 V rms) common-mode
voltage protection from its input to output. Both grades feature
a low common-mode capacitance of 4.5 pF inclusive of the
dc/dc power isolation. This results in a typical common-mode
rejection specification of 105 dB and a low leakage current of
2.0
A rms max (240 V rms, 60 Hz).
Isolated Power: An unregulated isolated power supply of
±15 V dc @ ±10 mA is available at the isolated input port of
the AD215. This permits the use of ancillary isolated front-end
amplifiers or signal conditioning components without the need
for a separate dc/dc supply. Even the excitation of transducers
can be accomplished in most applications.
Rated Performance over the –40 C to +85 C Temperature
Range: With an extended industrial temperature range rating,
the AD215 is an ideal isolation solution for use in many indus-
trial environments.
GENERAL DESCRIPTION
The AD215 is a high speed input isolation amplifier designed to
isolate and amplify wide bandwidth analog signals. The innova-
tive circuit and transformer design of the AD215 ensures wide-
band dynamic characteristics while preserving key dc performance
specifications.
The AD215 provides complete galvanic isolation between the
input and output of the device including the user-available
front-end isolated power supplies. The functionally complete
design, powered by a
±15 V dc supply, eliminates the need for a
user supplied isolated dc/dc converter. This permits the designer
to minimize circuit overhead and reduce overall system design
complexity and component costs.
The design of the AD215 emphasizes maximum flexibility and
ease of use in a broad range of applications where fast analog
signals must be measured under high common-mode voltage
(CMV) conditions. The AD215 has a
± 10 V input/output
range, a specified gain range of 1 V/V to 10 V/V, a buffered out-
put with offset trim and a user-available isolated front-end
power supply which produces
±15 V dc at ±10 mA.
PRODUCT HIGHLIGHTS
High Speed Dynamic Characteristics: The AD215 features
a typical full-power bandwidth of 120 kHz (100 kHz min), rise
time of 3
s and settling time of 9 s. The high speed perfor-
mance of the AD215 allows for unsurpassed galvanic isolation
of virtually any wideband dynamic signal.
OUT HI
TRIM
OUT LO
+15V
IN
–15V
IN
PWR RTN
FB
IN–
IN+
IN COM
+V
ISO
–V
ISO
1
3
MODULATOR
37
36
38
42
44
43
6
2
5
4
UNCOMMITTED
INPUT OP AMP
RR
OUTPUT
BUFFER
33k
0.01F
DEMODULATOR
LOW-PASS
FILTER
150kHz
POWER
ISOLATED
DC
SUPPLY
430kHz
POWER
OSCILLATOR
T1
T2
AD215
SIGNAL
相关PDF资料 |
PDF描述 |
|---|---|
| AD521LDZ | IC AMP INST 40MHZ PREC LN 14CDIP |
| AD522BD | IC AMP INST 1.5KHZ LDRIFT 14CDIP |
| AD524CD | IC AMP INST 1MHZ PREC LN 16CDIP |
| AD526SD | IC AMP PGA 10MA 16CDIP |
| AD548KN | IC OPAMP GP 1MHZ LP PREC 8DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD215BY | 功能描述:IC AMP ISOL LDIST 5MA 44SIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源，单路/双路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
| AD215BY | 制造商:Analog Devices 功能描述:IC AMP ISOLATION |
| AD215BYZ | 制造商:Analog Devices 功能描述:ISOLATION AMPLIFIER IC PACKAGE/CASE:12-S |
| AD-2164S | 制造商:BOTHHAND 制造商全称:Bothhand USA, LP. 功能描述:ADSL LINE TRANSFORMER |
| AD2-165Q-30000281 | 制造商:Amphenol Commercial 功能描述:RACK & PANEL CONNECTOR 制造商:Amphenol Corporation 功能描述:RACK AND PANEL CONNECTOR |
发布紧急采购，3分钟左右您将得到回复。