- 您现在的位置：买卖IC网 > PDF目录10804 > AD5301BRM-REEL7 (Analog Devices Inc)IC DAC 8BIT 2WIRE I2C 8-MSOP PDF资料下载
参数资料
| 型号： | AD5301BRM-REEL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/24页 |
| 文件大小： | 0K |
| 描述： | IC DAC 8BIT 2WIRE I2C 8-MSOP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 产品变化通告： | Product Discontinuance 27/Oct/2011 |
| 标准包装： | 1,000 |
| 设置时间： | 6µs |
| 位数： | 8 |
| 数据接口： | I²C，串行 |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 1.4mW |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 1 电压，单极；1 电压，双极 |
| 采样率（每秒）： | 167k |
AD5301/AD5311/AD5321
Rev. B | Page 18 of 24
APPLICATIONS NOTES
USING REF19x AS A POWER SUPPLY
Because the supply current required by the AD5301/AD5311/
AD5321 is extremely low, the user has an alternative option to
reference (for 3 V) to supply the required voltage to the part
(see Figure 36).
SDA
SCL
5V
150A TYP
REF195
2-WIRE
SERIAL
INTERFACE
VDD
AD5301/
AD5311/
AD5321
VOUT = 0V TO 5V
00
92
7
-03
4
Figure 36. REF195 as Power Supply to AD5301/AD5311/AD5321
This is especially useful if the power supply is quite noisy or if
the system supply voltages are at some value other than 5 V or
supply voltage for the AD5301/AD5311/AD5321. If the low
dropout REF195 is used, it needs to supply a current of 150 μA
to the AD5301/AD5311/AD5321. This is with no load on the
output of the DAC. When the DAC output is loaded, the REF195
also needs to supply the current to the load.
The total current required (with a 2 kΩ load on the DAC output
and full scale loaded to the DAC) is
150 μA + (5 V/2 kΩ) = 2.65 mA
The load regulation of the REF195 is typically 2 ppm/mA,
which results in an error of 5.3 ppm (26.5 μV) for the 2.65 mA
current drawn from it. This corresponds to a 0.00136 LSB error.
BIPOLAR OPERATION USING THE AD5301/
AD5311/AD5321
The AD5301/AD5311/AD5321 has been designed for single-
supply operation, but a bipolar output range is also possible
using the circuit in Figure 37. The circuit below gives an output
voltage range of ±5 V. Rail-to-rail operation at the amplifier
amplifier.
AD5301/
AD5311/
AD5321
2-WIRE SERIAL
INTERFACE
VOUT
VDD
10F
0.1F
+5V
–5V
R2
10k
AD820/
OP295
R1
10k
±5V
00
92
7-
0
35
Figure 37. Bipolar Operation with the AD5301/AD5311/AD5321
The output voltage for any input code can be calculated as
VOUT = [(VDD × (D/2N) × R1 + R2)/R1) VDD × (R2/R1)]
where:
D is the decimal equivalent of the code loaded to the DAC.
N is the DAC resolution.
With VDD = 5 V, R1 = R2 = 10 kΩ,
VOUT = (10 × D/2N) 5 V
MULTIPLE DEVICES ON ONE BUS
Figure 38 shows four AD5301 devices on the same serial bus.
Each has a different slave address since the state of their A0
and A1 pins is different. This allows each DAC to be written to
or read from independently. The master device output bus line
drivers are open-drain, pull-downs in a fully I2C-compatible
interface.
CMOS DRIVEN SCL AND SDA LINES
For single or multisupply systems where the minimum SCL
swing requirements allow it, a CMOS SCL driver may be used,
and the SCL pull-up resistor can be removed, making the SCL
bus line fully CMOS compatible. This reduces power consump-
tion in both the SCL driver and receiver devices. The SDA line
remains open-drain, I2C compatible.
Further changes, in the SDA line driver, may be made to make
the system more CMOS compatible and save more power. As
the SDA line is bidirectional, it cannot be made fully CMOS
compatible. A switched pull-up resistor can be combined with
a CMOS device with an open-circuit (three-state) input such
that the CMOS SDA driver is enabled during write cycles and
I2C mode is enabled during shared cycles, that is, readback,
acknowledge bit cycles, start conditions, and stop conditions.
相关PDF资料 |
PDF描述 |
|---|---|
| ADM238LARZ | IC TXRX RS-232 4:4 5V LP 24SOIC |
| ADM3307EACPZ | IC TXRX RS-232 5:3 2.7V 32LFCSP |
| DAC8512FP | IC DAC 12BIT 5V COMPLETE 8-DIP |
| DAC8420EP | IC DAC 12BIT QUAD SRL-OUT 16-DIP |
| AD5316BRU | IC DAC 10BIT QUAD W/BUFF 16TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5301BRMZ | 功能描述:IC DAC 8BIT 2WIRE I2C 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 标准包装:3,000 系列:nanoDAC™ 设置时间:80µs 位数:18 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电压，单极 采样率（每秒）:- 产品目录页面:784 (CN2011-ZH PDF) 配用:EVAL-AD5680EBZ-ND - BOARD EVAL FOR AD5680 其它名称:AD5680BRJZ-2REEL7TR |
| AD5301BRMZ1 | 制造商:AD 制造商全称:Analog Devices 功能描述:2.5 V to 5.5 V, 120 ??A, 2-Wire Interface, Voltage-Output 8-/10-/12-Bit DACs |
| AD5301BRMZ-REEL | 功能描述:IC DAC 8BIT 2WIRE I2C 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
| AD5301BRMZ-REEL1 | 制造商:AD 制造商全称:Analog Devices 功能描述:2.5 V to 5.5 V, 120 ??A, 2-Wire Interface, Voltage-Output 8-/10-/12-Bit DACs |
| AD5301BRMZ-REEL7 | 功能描述:IC DAC 8BIT 2WIRE I2C 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Data Converter Fundamentals DAC Architectures 设计资源:Unipolar, Precision DC Digital-to-Analog Conversion using AD5450/1/2/3 8-14-Bit DACs (CN0052) Precision, Bipolar, Configuration for AD5450/1/2/3 8-14bit Multiplying DACs (CN0053) AC Signal Processing Using AD5450/1/2/3 Current Output DACs (CN0054) Programmable Gain Element Using AD5450/1/2/3 Current Output DAC Family (CN0055) Single Supply Low Noise LED Current Source Driver Using a Current Output DAC in the Reverse Mode (CN0139) 标准包装:10,000 系列:- 设置时间:- 位数:12 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 薄型，TSOT-23-8 供应商设备封装:TSOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:2.7M |
发布紧急采购，3分钟左右您将得到回复。