参数资料
型号: AD5313BRUZ-REEL7
厂商: Analog Devices Inc
文件页数: 1/28页
文件大小: 0K
描述: IC DAC 10BIT DUAL R-R 16-TSSOP
产品培训模块: Data Converter Fundamentals
DAC Architectures
标准包装: 1,000
设置时间: 7µs
位数: 10
数据接口: 串行
转换器数目: 2
电压电源: 单电源
功率耗散(最大): 2.5mW
工作温度: -40°C ~ 105°C
安装类型: 表面贴装
封装/外壳: 16-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 16-TSSOP
包装: 带卷 (TR)
输出数目和类型: 2 电压,单极;2 电压,双极
采样率(每秒): 143k
2.5 V to 5.5 V, 230 μA, Dual Rail-to-Rail
Voltage Output 8-/10-/12-Bit DACs
AD5303/AD5313/AD5323
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
1999–2007 Analog Devices, Inc. All rights reserved.
FEATURES
AD5303: 2 buffered 8-bit DACs in 1 package
A version: ±1 LSB INL, B version: ±0.5 LSB INL
AD5313: 2 buffered 10-bit DACs in 1 package
A version: ±4 LSB INL, B version: ±2 LSB INL
AD5323: 2 buffered 12-bit DACs in 1 package
A version: ±16 LSB INL, B version: ±8 LSB INL
16-lead TSSOP package
Micropower operation: 300 μA @ 5 V (including reference
current)
Power-down to 200 nA @ 5 V, 50 nA @ 3 V
2.5 V to 5.5 V power supply
Double-buffered input logic
Guaranteed monotonic by design over all codes
Buffered/unbuffered reference input options
Output range: 0 V to VREF or 0 V to 2 VREF
Power-on-reset to 0 V
SDO daisy-chaining option
Simultaneous update of DAC outputs via LDAC pin
Asynchronous CLR facility
Low power serial interface with Schmitt-triggered inputs
On-chip rail-to-rail output buffer amplifiers
APPLICATIONS
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
GENERAL DESCRIPTION
The AD5303/AD5313/AD5323 are dual 8-/10-/12-bit buffered
voltage output DACs in a 16-lead TSSOP package that operate
from a single 2.5 V to 5.5 V supply, consuming 230 μA at 3 V.
Their on-chip output amplifiers allow the outputs to swing rail-to-
rail with a slew rate of 0.7 V/μs. The AD5303/AD5313/AD5323
utilize a versatile 3-wire serial interface that operates at clock
rates up to 30 MHz and is compatible with standard SPI, QSPI,
MICROWIRE, and DSP interface standards.
The references for the two DACs are derived from two reference
pins (one per DAC). These reference inputs may be configured
as buffered or unbuffered inputs. The parts incorporate a power-
on reset circuit, which ensures that the DAC outputs power up
to 0 V and remain there until a valid write to the device takes
place. There is also an asynchronous active low CLR pin that
clears both DACs to 0 V. The outputs of both DACs may be
updated simultaneously using the asynchronous LDAC input.
The parts contain a power-down feature that reduces the
current consumption of the devices to 200 nA at 5 V (50 nA
at 3 V) and provides software-selectable output loads while
in power-down mode. The parts may also be used in daisy-
chaining applications using the SDO pin.
The low power consumption of these parts in normal operation
makes them ideally suited to portable battery-operated equip-
ment. The power consumption is 1.5 mW at 5 V and 0.7 mW at
3 V, reducing to 1 μW in power-down mode.
FUNCTIONAL BLOCK DIAGRAM
DAC
REGISTER
POWER-DOWN
LOGIC
BUFFER
STRING
DAC
STRING
DAC
AD5303/AD5313/AD5323
INPUT
REGISTER
INPUT
REGISTER
DAC
REGISTER
INTERFACE
LOGIC
SCLK
POWER-ON
RESET
VDD
VREFA
VOUTA
VOUTB
GND
VREFB
LDAC
DIN
00
47
2-
0
01
SYNC
CLR
PD
BUF B
BUFFER
SDO
DCEN
BUF A
RESISTOR
NETWORK
RESISTOR
NETWORK
GAIN-SELECT
LOGIC
Figure 1.
相关PDF资料
PDF描述
VI-B1X-MV-F2 CONVERTER MOD DC/DC 5.2V 150W
AD5662BRMZ-1REEL7 IC DAC 16BIT BUFF V-OUT 8-MSOP
VE-2N4-MW-F4 CONVERTER MOD DC/DC 48V 100W
VI-B1W-MV-F2 CONVERTER MOD DC/DC 5.5V 150W
VI-B1T-MV-F2 CONVERTER MOD DC/DC 6.5V 150W
相关代理商/技术参数
参数描述
AD5313R 制造商:AD 制造商全称:Analog Devices 功能描述:Dual, 10-Bit nanoDAC with 2 ppm/C Reference, SPI Interface
AD5313RBCPZ-RL7 功能描述:数模转换器- DAC 10-Bit 2-CHSPI on-chip ref RoHS:否 制造商:Analog Devices 转换器数量:4 DAC 输出端数量:4 转换速率: 分辨率:12 bit 接口类型:Serial (I2C) 稳定时间: 最大工作温度:+ 105 C 安装风格: 封装 / 箱体:TSSOP 封装:Reel
AD5313RBRUZ 功能描述:数模转换器- DAC 10-Bit 2-ch SPI nanoDAC+with on-chip ref RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube
AD5313RBRUZ-RL7 功能描述:数模转换器- DAC 10-Bit 2-CHSPI on-chip ref RoHS:否 制造商:Analog Devices 转换器数量:4 DAC 输出端数量:4 转换速率: 分辨率:12 bit 接口类型:Serial (I2C) 稳定时间: 最大工作温度:+ 105 C 安装风格: 封装 / 箱体:TSSOP 封装:Reel
AD5313WBRUZ-REEL7 功能描述:IC DAC 10BIT DUAL R-R 16TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色产品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 标准包装:91 系列:- 设置时间:4µs 位数:10 数据接口:MICROWIRE?,串行,SPI? 转换器数目:8 电压电源:单电源 功率耗散(最大):2.7mW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-DFN-EP(4x3) 包装:管件 输出数目和类型:8 电压,单极 采样率(每秒):*