参数资料
| 型号： | AD5379ABC |
| 厂商： | Analog Devices Inc |
| 文件页数： | 20/29页 |
| 文件大小： | 0K |
| 描述： | IC DAC 14BIT 40CH 108-CSPBGA |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 1 |
| 设置时间： | 20µs |
| 位数： | 14 |
| 数据接口： | 串行，并联 |
| 转换器数目： | 40 |
| 电压电源： | 模拟和数字，双 ± |
| 功率耗散（最大）： | 850mW |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 108-BGA，CSPBGA |
| 供应商设备封装： | 108-CSPBGA（13x13） |
| 包装： | 托盘 |
| 输出数目和类型： | 40 电压，双极 |
| 采样率（每秒）： | 50k |
| 配用： | EVAL-AD5379EBZ-ND - BOARD EVALUATION FOR AD5379 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页
AD5379
Rev. B | Page 26 of 28
POWER SUPPLY DECOUPLING
In any circuit where accuracy is important, careful considera-
tion of the power supply and ground return layout helps to
ensure the rated performance. The printed circuit board on
which the AD5379 is mounted should be designed so that the
analog and digital sections are separated and confined to
certain areas of the board. If the AD5379 is in a system where
multiple devices require an AGND-to-DGND connection, the
connection should be made at one point only. The star ground
point should be established as close as possible to the device.
For supplies with multiple pins (VSS, VDD, VCC), it is recom-
mended to tie these pins together and to decouple each
supply once.
The AD5379 should have ample supply decoupling of 10 μF in
parallel with 0.1 μF on each supply located as close to the
package as possible, ideally right up against the device. The
10 μF capacitors are the tantalum bead type. The 0.1 μF capaci-
tor should have low effective series resistance (ESR) and
effective series inductance (ESI), such as the common ceramic
types that provide a low impedance path to ground at high
frequencies, to handle transient currents due to internal
logic switching.
Digital lines running under the device should be avoided,
because these couple noise onto the device. The analog ground
plane should be allowed to run under the AD5379 to avoid
noise coupling. The power supply lines of the AD5379 should
use as large a trace as possible to provide low impedance paths
and reduce the effects of glitches on the power supply line. Fast
switching digital signals should be shielded with digital ground
to avoid radiating noise to other parts of the board, and should
never be run near the reference inputs. It is essential to mini-
mize noise on all VREF(+) and VREF() lines. The VBIAS pin should
be decoupled with a 10 nF capacitor to AGND.
Avoid crossover of digital and analog signals. Traces on
opposite sides of the board should run at right angles to each
other. This reduces the effects of feedthrough through the
board. A microstrip technique is by far the best, but not always
possible with a double-sided board. In this technique, the
component side of the board is dedicated to ground plane,
while signal traces are placed on the solder side.
As is the case for all thin packages, care must be taken to avoid
flexing the CSPBGA package and to avoid a point load on the
surface of this package during the assembly process.
POWER-ON
An on-chip power supply monitor makes the AD5379 robust to
power sequencing. The supply monitor powers up the analog
section after (VDD VSS) is greater than 7 V (typical). The
output buffers power-up in CLR mode forced to the DUTGND
potential, even if VCC remains at 0 V. After VSS is applied, the
analog circuitry powers up, and the buffered DAC output level
settles linearly within the supply range.
相关PDF资料 |
PDF描述 |
|---|---|
| AD5380BSTZ-3 | IC DAC 14BIT 40CHAN 3V 100LQFP |
| AD5381BSTZ-5 | IC DAC 12BIT 40CH 5V 100-LQFP |
| AD5382BSTZ-3 | IC DAC 14BIT 32CHAN 3V 100LQFP |
| AD5390BCPZ-5 | IC DAC 14BIT 16CHAN 5V 64LFCSP |
| AD5398ABCBZ-REEL | IC DAC 10BIT CURRENT-SINK 9WLCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5379ABCZ | 功能描述:IC DAC 14BIT 40CHAN 108CSPBGA RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1,000 系列:- 设置时间:1µs 位数:8 数据接口:串行 转换器数目:8 电压电源:双 ± 功率耗散（最大）:941mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC W 包装:带卷 (TR) 输出数目和类型:8 电压，单极 采样率（每秒）:* |
| AD537JCHIPS | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-to-Frequency Converter |
| AD537JD | 功能描述:IC V/F CONV 14-CDIP RoHS:否 类别:集成电路 (IC) >> PMIC - V/F 和 F/V 转换器 系列:- 标准包装:1 系列:- 类型:频率至电压 频率 - 最大:10kHz 全量程:- 线性:±0.3% 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:Digi-Reel® 其它名称:LM2917MX-8/NOPBDKR |
| AD537JH | 功能描述:IC V/F CONV TO-100-10 RoHS:否 类别:集成电路 (IC) >> PMIC - V/F 和 F/V 转换器 系列:- 标准包装:1 系列:- 类型:频率至电压 频率 - 最大:10kHz 全量程:- 线性:±0.3% 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:Digi-Reel® 其它名称:LM2917MX-8/NOPBDKR |
| AD537JH | 制造商:Analog Devices 功能描述:SEMICONDUCTORS LINEAR 制造商:Analog Devices 功能描述:V/F CONVERTER 150KHZ 0.15% |
发布紧急采购，3分钟左右您将得到回复。