参数资料
| 型号： | AD5504BRUZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 7/20页 |
| 文件大小： | 0K |
| 描述： | IC DAC 12BIT SPI 16-TSSOP |
| 产品培训模块： | DAC Architectures |
| 设计资源： | Powering a 30V DAC from a 3V supply (CN0193) |
| 标准包装： | 1 |
| 设置时间： | 45µs |
| 位数： | 12 |
| 数据接口： | SPI?、QSPI?、MICROWIRE? 和 DSP |
| 转换器数目： | 4 |
| 电压电源： | 单 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | * |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | * |
| 包装： | 管件 |
| 输出数目和类型： | 4 电压，单极 |
| 采样率（每秒）： | * |
Data Sheet
AD5504
Rev. B | Page 15 of 20
TEMPERATURE SENSOR
The AD5504 has an integrated temperature sensor that causes
the part to enter thermal shutdown mode when the temperature
on the die exceeds 110°C. In thermal shutdown mode, the
analog section of the device powers down and the DAC outputs
are disconnected, but the digital section remains operational,
which is equivalent to setting the power-down bit in the control
register. To indicate that the AD5504 has entered temperature
shutdown mode, Bit 0 of the control register is set to 1 and the
ALARM pin goes low. The AD5504 remains in temperature
shutdown mode with Bit 0 set to 1 and the ALARM pin low, even
if the die temperature falls, until Bit 0 in the control register is
cleared to 0.
POWER DISSIPATION
Drawing current from any of the voltage output pins causes a
temperature rise in the die and package of the AD5504. The
package junction temperature (TJ) should not exceed 130°C for
normal operation. If the die temperature exceeds 110°C, the
AD5504 enters thermal shutdown mode as described in the
Temperature Sensor section.
The amount of heat generated can be calculated using the
formula
TJ = TA + (PTOTAL × θJA)
where:
TJ is the package junction temperature.
TA is the ambient temperature.
PTOTAL is the total power being consumed by the AD5504.
θJA is the thermal impedance of the AD5504 package (see the
Absolute Maximum Ratings section for this value).
POWER SUPPLY SEQUENCING
The power supplies for the AD5504 can be applied in any order
without affecting the device. However, the AGND and DGND
pins should be connected to the relevant ground plane before
the power supplies are applied. None of the digital input pins
(SCLK, SDI, SYNC, R_SEL and CLR) should be allowed to float
during power up. The digital input pins can be connected to
pull-up (to VLOGIC) or pull-down (to DGND) resistors as
required.
相关PDF资料 |
PDF描述 |
|---|---|
| AD5516ABC-3 | IC DAC 12BIT 16CH 74-CSPBGA |
| AD5531BRU | IC DAC 14BIT SRL IN/VOUT 16TSSOP |
| AD5532BBCZ-1 | IC DAC 14BIT 32CH BIPO 74-CSPBGA |
| AD5541ABRMZ | IC DAC 16BIT 2.7-5.5V 10-MSOP |
| AD5542ABRUZ | IC DAC 16BIT SRL 16TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5504BRUZ-REEL | 制造商:AD 制造商全称:Analog Devices 功能描述:High Voltage, Quad-Channel 12-Bit Voltage Output DAC |
| AD5512A | 制造商:AD 制造商全称:Analog Devices 功能描述:2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-/12-Bit nanoDACs in LFCSP |
| AD5512AACPZ | 制造商:AD 制造商全称:Analog Devices 功能描述:2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-/12-Bit nanoDACs in LFCSP |
| AD5512AACPZ-REEL7 | 功能描述:IC DAC 12BIT 16LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:nanoDAC™ 产品培训模块:Data Converter Fundamentals DAC Architectures 标准包装:3,000 系列:nanoDAC™ 设置时间:80µs 位数:18 数据接口:DSP，MICROWIRE?，QSPI?，串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:带卷 (TR) 输出数目和类型:1 电压，单极 采样率（每秒）:- 产品目录页面:784 (CN2011-ZH PDF) 配用:EVAL-AD5680EBZ-ND - BOARD EVAL FOR AD5680 其它名称:AD5680BRJZ-2REEL7TR |
| AD5516 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-Channel, 12-Bit Voltage-Output DAC with 14-Bit Increment Mode |
发布紧急采购，3分钟左右您将得到回复。