参数资料
| 型号： | AD621BNZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC AMP INST LDRIFT LP 18MA 8DIP |
| 产品培训模块： | Instrumentation Amplifiers Performance |
| 标准包装： | 50 |
| 放大器类型： | 仪表 |
| 电路数： | 1 |
| 转换速率： | 1.2 V/µs |
| -3db带宽： | 800kHz |
| 电流 - 输入偏压： | 500pA |
| 电压 - 输入偏移： | 50µV |
| 电流 - 电源： | 900µA |
| 电流 - 输出 / 通道： | 18mA |
| 电压 - 电源，单路/双路(±)： | ±2.3 V ~ 18 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 770 (CN2011-ZH PDF) |
AD621
REV. B
–12–
AD548
TO
REF
C
R
TO
VOUT1
–
+
–
+
10
AD621
DAC
0 TO
10V
–
+
VDIFF
0.5V
INPUT A:
10V CM
VCOM
10V–
+
–
+
INPUT B:
1V
OFFSET
VDIFF + VOFFSET
(1.25V + 1V)
VOUT1
G = 10
–
+
10
AD621
VOUT2
TOTAL GAIN = 100
10k
OPTIONAL
USE THIS IN PLACE OF THE DAC FOR ZERO SUPPRESSION FUNCTION.
Figure 6. Suppressing a Large Common-Mode or Offset Voltage in Order to Measure a Small Differential Signal
(VS =
±15 V)
The AD621, as well as many other monolithic instrumentation
amplifiers, is based on the “three op amp” in amp circuit (Fig-
ure 7) amplifier. Since the input amplifiers (A1 and A2) have a
common-mode gain of unity and a differential gain equal to the
set gain of the overall in amp, the voltages V1 and V2 are defined
by the equations
V1 = VCM + G
× V
DIFF/2
V2 = VCM – G
× V
DIFF/2
The common-mode voltage will drive the outputs of amplifiers
A1 and A2 to the differential-signal voltage, multiplied by the
gain, spreads them apart. For a 10 V common-mode 0.1 V
differential input, V1 would be at 10.5 V and V2 at 9.5 V.
A1
A3
–
+
10k
A2
–
+
20k
+
–
V1
V2
INPUT AMPLIFIER
DIFFERENTIAL GAIN = 10
COMMON MODE GAIN = 1
OUTPUT AMPLIFIER
DIFFERENTIAL GAIN = 1
COMMON MODE GAIN = 1/1000
4.44k
Figure 7. Typical Three Op Amp Instrumentation
Amplifier, Differential Gain = 10
The AD621’s input amplifiers can provide output voltage within
2.5 V of the supplies. To avoid saturation of the input amplifier
the input voltage must therefore obey the equations:
VCM + G
× V
DIFF/2
≤ (Upper Supply – 2.5 V)
VCM – G
× V
DIFF/2
≥ (Lower Supply + 2.5 V)
Figure 8 shows the trade-off between common-mode and
differential-mode input for
±15 V supplies and G = 10.
By cascading with use of the optional AD621, the circuit of
Figure 6 will provide
±1 V of zero suppression at gains of 10
and 100 (at VOUT1 and VOUT2 respectively) with maximum TCs
of
±4 ppm/°C and ±8 ppm/°C, respectively. Therefore, depend-
ing on the magnitude of the differential input signal, either
VOUT1 or VOUT2 may be used as the output.
VCM – Volts
1.2
0.2
010
2
V
DIFF
–
Volts
48
1.0
0.8
0.6
0.4
6
0
12
Figure 8. Trade-Off Between VCM and VDIFF Range (VS =
±15 V, G = 10), for Reference Pin at Ground
相关PDF资料 |
PDF描述 |
|---|---|
| 929500-01-21-RK | CONN HEADER .100 SNGL R/A 21POS |
| LT1230CS#PBF | IC CURR FEEDBACK AMP QUAD 14SOIC |
| RMCF0603JT56R0 | RES 56 OHM 1/10W 5% 0603 SMD |
| GEC10SGSN-M89 | CONN HEADER 10POS .100 RT/A SMD |
| PBC11DFAN | CONN HEADER .100 DUAL STR 22POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD621BR | 功能描述:IC AMP INST LDRIFT LP 18MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:30pA 电压 - 输入偏移:2000µV 电流 - 电源:200µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| AD621BR-REEL | 功能描述:IC AMP INST LDRIFT LP 18MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD621BR-REEL7 | 功能描述:IC AMP INST LDRIFT LP 18MA 8SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD621BRZ | 功能描述:IC AMP INST LDRIFT LP 18MA 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:J-FET 电路数:2 输出类型:- 转换速率:3.5 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:30pA 电压 - 输入偏移:2000µV 电流 - 电源:200µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):7 V ~ 36 V，±3.5 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-PDIP 包装:管件 |
| AD621BRZ | 制造商:Analog Devices 功能描述:IC, INSTRUMENT AMP, 800KHZ, 130DB SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。