- 您现在的位置：买卖IC网 > PDF目录16225 > AD7280ABSTZ (Analog Devices Inc)IC BATT MONITOR LI-ION 48LQFP PDF资料下载
参数资料
| 型号： | AD7280ABSTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 15/48页 |
| 文件大小： | 0K |
| 描述： | IC BATT MONITOR LI-ION 48LQFP |
| 标准包装： | 1 |
| 功能： | 电池监控器，过压/欠压保护 |
| 电池化学： | 锂离子（Li-Ion） |
| 电源电压： | 8 V ~ 30 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
AD7280A
THEORY OF OPERATION
CIRCUIT INFORMATION
The AD7280A is a lithium ion (Li-Ion) battery monitoring chip
that can monitor the voltage and temperature of four, five, or six
series-connected Li-Ion battery cells. The AD7280A also provides
an interface that can be used to control external transistors for
cell balancing.
The V DD and V SS supplies required by the AD7280A should
be taken from battery cells being monitored by the part. An
internal V REG rail is generated to provide power for the ADC
and the internal interface circuitry. This V REG voltage is available
on an output pin for use external to the AD7280A.
The AD7280A consists of a high voltage input multiplexer, a low
voltage input multiplexer, and a SAR ADC. The high voltage
multiplexer allows four, five, or six series-connected Li-Ion
battery cells to be measured. The low voltage multiplexer provides
the user with six single-ended ADC inputs that can be used in
combination with external thermistors to measure the tempera-
ture of each battery cell. The auxiliary ADC inputs can also be
used for external diagnostics in the application. Initiating conver-
sions on all 12 channels, that is, the six cell voltage channels and
the six auxiliary ADC channels, requires only a single CNVST
pulse. Alternatively, the conversion can be initiated through the
rising edge of CS. Each conversion result is stored in an individual
result register (see Table 13 ).
Each individual cell voltage and auxiliary ADC measurement
requires a minimum of 1 μs to acquire and complete a conver-
sion. Depending on the external components connected to the
analog inputs of the AD7280A, additional acquisition time may
be required. A higher acquisition time can be selected through
the control register. The AD7280A also provides a conversion
averaging option that can be selected through the control register.
This option allows the user to complete two, four, or eight averages
on each cell voltage and auxiliary ADC measurement. The aver-
aged conversion results are stored in the result registers. On
power-up, the default combined acquisition and conversion
time is 1 μs, with the averaging register set to 0, that is, a single
conversion per channel.
The results of the cell voltage and auxiliary ADC conversions
are read back via the 4-wire serial peripheral interface (SPI).
The SPI is also used to write to and read from the internal
registers.
The AD7280A features an alert function that can be triggered if
the voltage conversion results or the auxiliary ADC conversion
The AD7280A provides six analog output voltages that can be
used to control external transistors as part of a cell balancing
circuit. Each cell balance output provides a 0 V or 5 V voltage,
with respect to the potential on the base of each individual cell,
that can be applied to the gate of the external cell balancing
transistors.
The AD7280A features a daisy-chain interface. Individual
AD7280A devices can monitor the cell voltages and tempera-
tures of six cells. A chain of AD7280As can be used to monitor
the cell voltages and temperatures of a larger number of cells. The
conversion data from each AD7280A in the chain passes to the
system controller via a single SPI interface. Control data can
similarly be passed via the SPI up the chain to each individual
AD7280A.
The AD7280A includes an on-chip 2.5 V reference. The
reference voltage is available for use external to the AD7280A.
The AD7280A also has a V DRIVE feature to control the voltage at
which the serial interface operates. V DRIVE allows the ADC to
easily interface to both 3 V and 5 V processors. For example, in
the recommended configuration, the AD7280A is operated with
a supply of 5 V; however, the V DRIVE pin can be powered from
a 3 V supply, allowing a large dynamic range with low voltage
digital processors.
CONVERTER OPERATION
The conversion paths of the AD7280A consist of a high voltage
input multiplexer or a low voltage input multiplexer and a SAR
ADC. The high voltage multiplexer selects the pair of analog
inputs, VIN0 to VIN6, that is to be converted. The voltage of
each individual cell is measured by converting the difference
between adjacent analog inputs, that is, VIN1 ? VIN0, VIN2 ?
VIN1, and so on (see Figure 22 and Figure 23). The low voltage
multiplexer selects the auxiliary ADC input, AUX1 to AUX6,
that is to be converted. The conversion results for each cell
voltage and auxiliary ADC input can be accessed t WAIT after
the programmed conversion sequence is completed.
VIN6
VIN5
VIN4
VIN3
VIN2
results exceed the maximum and minimum voltage thresholds
selected by the user. The alert modes and threshold levels are
selected by writing to internal registers.
VIN1
VIN0
ADC V IN+
ADC V IN–
Figure 22. Mux Configuration During VIN1 to VIN0 Sampling
Rev. 0 | Page 15 of 48
相关PDF资料 |
PDF描述 |
|---|---|
| 6A44-B0421-014.0-0 | CABLE CX4-CX4 DDR 4CH PLEN 14M |
| 6A44-B0421-013.0-0 | CABLE CX4-CX4 DDR 4CH PLEN 13M |
| 6A44-B0421-012.0-0 | CABLE CX4-CX4 DDR 4CH PLEN 12M |
| 6A44-B0421-011.0-0 | CABLE CX4-CX4 DDR 4CH PLEN 11M |
| M1WXK-4036J | IDC CABLE - MPL40K/MC40G/X |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7280ABSTZ-RL | 功能描述:IC BATTERY MONITOR LI-ION 48LQFP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
| AD7280AWBSTZ | 功能描述:IC BATT MON LI-ION AUTO 48LQFP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
| AD7280AWBSTZ-RL | 功能描述:IC BATT MON LI-ION AUTO 48LQFP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性，锂离子，镍镉，镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR) |
| AD7280BSTZ | 制造商:Analog Devices 功能描述: |
| AD7280BSTZ-RL | 制造商:Analog Devices 功能描述: |
发布紧急采购，3分钟左右您将得到回复。