参数资料
型号: AD73322EB
厂商: Analog Devices, Inc.
英文描述: Low Power 10MHz Current Feedback Amplifier; Package: SO; No of Pins: 8; Temperature Range: 0°C to +70°C
中文描述: 低功耗和低成本的CMOS通用双模拟前端(386.88十一)
文件页数: 33/40页
文件大小: 437K
代理商: AD73322EB
REV. 0
AD73322L
–33–
and the DSP program initializes pointers to the top of the buffer
i3 = ^init_cmds; l3 = %init_cmds;
and puts the first entry in the DSP
s transmit buffer so that it is
available at the first SDOFS pulse.
ax0 = dm(i3,m1);
tx0 = ax0;
The DSP
s transmit interrupt is enabled.
imask = b#0001000000;
At each occurrence of an SDOFS pulse, the DSP
s transmit
buffer contents are sent to the SDI pin of the AD73322L. This
also causes a subsequent DSP Tx interrupt which transfers the
initialization word, pointed to by the circular buffer pointer, to
the Tx buffer. The buffer pointer is updated to point to the next
unsent initialization word. When the circular buffer pointer wraps
around, which happens after the last word has been accessed, it
indicates that the initialization phase is complete. This can be done
manually
in the DSP using a simple address check, or auto-
buffered mode can be used to complete the transfer automatically.
txcdat: ar = dm(stat_flag);
ar = pass ar;
if eq rti;
ena sec_reg;
ax0 = dm (i3, m1);
tx0 = ax0;
ax0 = i3;
ay0 = ^init_cmds;
ar = ax0 - ay0;
if gt rti;
ax0 = 0x00;
dm (stat_flag) = ax0;
rti;
In the main body of the program, the code loops waiting for the
initialization sequence to be completed.
check_init:
ax0 = dm (stat_flag);
af = pass ax0;
if ne jump check_init;
As the AD73322L is effectively a cascade of two codec units, it
is important to observe some restrictions in the sequence of
sending initialization words to the two codecs. It is preferable to
send pairs of control words for the corresponding control regis-
ters in each codec, and it is essential to send the control word
for codec 2 before that for codec 1. Control Registers A and
B contain settings, such as sampling rate, serial clock rate, etc.,
which critically require synchronous update in both codecs.
Once the device has been initialized, Control Register A on both
codecs is written with a control word which changes the operat-
ing mode from Program Mode to either data mode or Mixed
Control Data Mode. The device count field which defaults to
000b will have to be programmed to 001b for a single AD73322L
device. In data mode or mixed mode, the main function of the
device is to return ADC samples from both codecs and to accept
DAC words for both codecs. During each sample interval, two
ADC samples will be returned from the device, while in the same
interval two DAC update samples will be sent to the device. In
order to reduce the number of interrupts and to reduce com-
plexity, autobuffering can be used to ensure that only one
interrupt is generated during each sampling interval.
相关PDF资料
PDF描述
AD73322EZ Precision Rail-to-Rail Input and Output Op Amp; Package: SO; No of Pins: 8; Temperature Range: 0°C to +70°C
AD73322LYR Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
AD73322LYRU Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
AD73322LYST Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
AD73322L KNOB, RT25; Series:29JF RoHS Compliant: Yes
相关代理商/技术参数
参数描述
AD73322EZ 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost Low Power CMOS General-Purpose Dual Analog Front End(386.88 k)
AD73322L 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost, Low Power CMOS General-Purpose Dual Analog Front End
AD73322LAR 制造商:Analog Devices 功能描述:Audio Codec 2ADC / 2DAC 16-Bit 28-Pin SOIC W 制造商:Rochester Electronics LLC 功能描述:SPEECH AND TELEPHONY CODEC I.C. - Bulk
AD73322LAR-REEL 制造商:Analog Devices 功能描述:Audio Codec 2ADC / 2DAC 16-Bit 28-Pin SOIC W T/R 制造商:Rochester Electronics LLC 功能描述:SPEECH AND TELEPHONY CODEC I.C. - Tape and Reel
AD73322LARU 制造商:Analog Devices 功能描述:Audio Codec 2ADC / 2DAC 16-Bit 28-Pin TSSOP 制造商:Rochester Electronics LLC 功能描述:SPEECH AND TELEPHONY CODEC I.C. - Bulk 制造商:Analog Devices 功能描述:IC AUDIO CODEC