- 您现在的位置：买卖IC网 > PDF目录5753 > AD743JRZ-16-REEL (Analog Devices Inc)IC OPAMP BIFET 4.5MHZ LN 16SOIC PDF资料下载
参数资料
| 型号： | AD743JRZ-16-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/12页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP BIFET 4.5MHZ LN 16SOIC |
| 标准包装： | 1,000 |
| 放大器类型： | J-FET |
| 电路数： | 1 |
| 转换速率： | 2.8 V/µs |
| -3db带宽： | 4.5MHz |
| 电流 - 输入偏压： | 250pA |
| 电压 - 输入偏移： | 250µV |
| 电流 - 电源： | 8.1mA |
| 电流 - 输出 / 通道： | 40mA |
| 电压 - 电源，单路/双路(±)： | 9.6 V ~ 36 V，±4.8 V ~ 18 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
REV. E
AD743
–11–
R2
1900
R4*
R1
108
R3
100
OUTPUT
AD743
*OPTIONAL, SEE TEXT
INPUT SENSITIVITY = –179 dB re. 1V/ Pa**
**1V PER MICROPASCAL
B AND K TYPE 8100
HYDROPHONE
CT
CC
C1*
Figure 15b. AC-Coupled, Low Noise
Hydrophone Amplifier
R5
100k
R1
108
R4*
108
OUTPUT
DC OUTPUT
1mV FOR IB (AD743)
100nA
CT
C1*
AD743
R2
1900
R6
1M
R7
16M
*OPTIONAL, SEE TEXT
C2
0.27 F
R3
100
B AND K
TYPE 8100
HYDROPHONE
AD711K
Figure 15c. Hydrophone Amplifier Incorporating a
DC Servo Loop
where the dc gain is 1 and the gain above the low frequency cutoff
(1/(2
πC
C(100
))) is the same as the circuit of Figure 15a. The
circuit of Figure 15c uses a dc servo loop to keep the dc output
at 0 V and to maintain full dynamic range for IB up to 100 nA.
The time constant of R7 and C2 should be larger than that of
R1 and CT for a smooth low frequency response.
The transducer shown has a source capacitance of 7500 pF. For
smaller transducer capacitances (
≤300 pF), the lowest noise can
be achieved by adding a parallel RC network (R4 = R1, C1 = CT)
in series with the inverting input of the AD743.
BALANCING SOURCE IMPEDANCES
As mentioned previously, it is good practice to balance the
source impedances (both resistive and reactive) as seen by the
inputs of the AD743. Balancing the resistive components will
optimize dc performance over temperature because balancing
will mitigate the effects of any bias current errors. Balancing
input capacitance will minimize ac response errors due to the
amplifier’s input capacitance and, as shown in Figure 16, noise
performance will be optimized. Figure 17 shows the required
external components for noninverting (A) and inverting (B)
configurations.
INPUT CAPACITORS (pF)
RTI
VOLTAGE
NOISE
(nV/
√
Hz
)
40
30
20
10
100
1000
UNBALANCED
BALANCED
2.9nV/
√Hz
Figure 16. RTI Voltage Noise vs. Input Capacitance
OUTPUT
R1
R2
RB
CB
CS
RS
NONINVERTING
CONNECTION
A
CB = CS
RB = RS
FOR
RS >> R1 OR R2
OUTPUT
R1
CS
CF
CB
RS
RB
INVERTING
CONNECTION
B
CB = CF CS
RB = R1 RS
Figure 17. Optional External Components for Balancing Source Impedances
相关PDF资料 |
PDF描述 |
|---|---|
| 3-5499374-0 | CONN HEADER VERT 50POS .100 GOLD |
| RMCF1206FT205K | RES TF 205K OHM 1% 0.25W 1206 |
| 77311-124-26LF | BERGSTIK |
| OP297FS | IC OPAMP GP 500KHZ DUAL 8SOIC |
| 63733-1 | CONN GROUND CLIP 18-22AWG |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD743JRZ-16-REEL7 | 功能描述:IC OPAMP BIFET 4.5MHZ LN 16SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD743KN | 制造商:Rochester Electronics LLC 功能描述:LOW NOISE BIFET OP AMP IC - Bulk |
| AD743KQ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD743KR | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD743KR-16 | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultralow Noise BiFET Op Amp |
发布紧急采购，3分钟左右您将得到回复。