- 您现在的位置：买卖IC网 > PDF目录165343 > AD7457BRT-REEL7 (ANALOG DEVICES INC) Low Power, Pseudo Differential, 100 kSPS 12-Bit ADC in an 8-Lead SOT-23 PDF资料下载
参数资料
| 型号： | AD7457BRT-REEL7 |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | ADC |
| 英文描述： | Low Power, Pseudo Differential, 100 kSPS 12-Bit ADC in an 8-Lead SOT-23 |
| 中文描述： | 1-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8 |
| 封装： | MO-178BA, SOT-23, 8 PIN |
| 文件页数： | 8/20页 |
| 文件大小： | 532K |
| 代理商： | AD7457BRT-REEL7 |
AD7457
Rev. A | Page 16 of 20
APPLICATION HINTS
GROUNDING AND LAYOUT
The printed circuit board that houses the AD7457 should be
designed so that the analog and digital sections are separated
and confined to certain areas of the board. This facilitates the
use of ground planes that can be easily separated. A minimum
etch technique is generally best for ground planes, because it
gives the best shielding. Digital and analog ground planes
should be joined in only one place, and the connection should
be a star ground point established as close as possible to the
GND pin on the AD7457.
Avoid running digital lines under the device, because this
couples noise onto the die. The analog ground plane should be
allowed to run under the AD7457 to avoid noise coupling. The
power supply lines to the AD7457 should use as large a trace as
possible to provide low impedance paths and reduce the effects
of glitches on the power supply line. Fast switching signals,
such as clocks, should be shielded with digital ground to avoid
radiating noise to other sections of the board, and clock signals
should never run near the analog inputs. Avoid crossover of
digital and analog signals. Traces on opposite sides of the board
should run at right angles to each other. This reduces the effects
of feed through the board. A micro strip technique is the best,
but is not always possible with a double-sided board.
In this technique, the component side of the board is dedicated
to ground planes, while signals are placed on the solder side.
Good decoupling is also important. All analog supplies should
be decoupled with 10 F tantalum capacitors in parallel with
0.1 F capacitors to GND. To achieve the best from these
decoupling components, place them as close as possible to
the device.
相关PDF资料 |
PDF描述 |
|---|---|
| AD745AN | Ultralow Noise, High Speed, BiFET Op Amp |
| AD745JN | Ultralow Noise, High Speed, BiFET Op Amp |
| AD7466BRM | 1.8 V, Micro-Power, 8/10/12-Bit ADCs in 6 Lead SOT-23 |
| AD7466BRT | 1.8 V, Micro-Power, 8/10/12-Bit ADCs in 6 Lead SOT-23 |
| AD7467BRT | 1.8 V, Micro-Power, 8/10/12-Bit ADCs in 6 Lead SOT-23 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7457BRTZ-R2 | 制造商:Analog Devices 功能描述: |
| AD7457BRTZ-REEL | 制造商:Analog Devices 功能描述: |
| AD7457BRTZ-REEL7 | 功能描述:IC ADC 12BIT PSEUDO-DIFF SOT23-8 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD745AN | 制造商:AD 制造商全称:Analog Devices 功能描述:Ultralow Noise, High Speed, BiFET Op Amp |
| AD745AQ | 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Analog Devices 功能描述: |
发布紧急采购，3分钟左右您将得到回复。