参数资料
型号: AD7686CCPZRL
厂商: Analog Devices Inc
文件页数: 8/28页
文件大小: 0K
描述: IC ADC 16BIT SAR 500KSPS 10LFCSP
标准包装: 5,000
系列: PulSAR®
位数: 16
采样率(每秒): 500k
数据接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
转换器数目: 1
功率耗散(最大): 21.5mW
电压电源: 模拟和数字
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 10-WFDFN 裸露焊盘,CSP
供应商设备封装: 10-LFCSP-WD(3x3)
包装: 带卷 (TR)
输入数目和类型: 1 个伪差分,单极
配用: EVAL-AD7686CBZ-ND - BOARD EVALUATION FOR AD7686
AD7686
Rev. B | Page 16 of 28
The AD7686 powers down automatically at the end of each
conversion phase and, therefore, the power scales linearly with
the sampling rate, as shown in Figure 31. This makes the part
ideal for low sampling rates (even a few Hz) and low battery-
powered applications.
SAMPLING RATE (SPS)
O
PER
A
T
ING
CURRE
NT
S
(
A)
1000
100
10000
10
1
0.1
0.01
0.001
10
100
1000
10000
100000
1000000
0
29
69-
032
VIO
VDD = 5V
Figure 31. Operating Currents vs. Sampling Rate
SUPPLYING THE ADC FROM THE REFERENCE
For simplified applications, the AD7686, with its low operating
current, can be supplied directly using the reference circuit
shown in Figure 32. The reference line can be driven by either:
The system power supply directly.
A reference voltage with enough current output capability,
such as the ADR43x.
A reference buffer, such as the AD8031, which can also
filter the system power supply, as shown in Figure 32.
AD8031
AD7686
VIO
REF
VDD
10F
1F
10
10k
5V
1F
1
02
96
9-
0
33
1OPTIONAL REFERENCE BUFFER AND FILTER.
Figure 32. Example of Application Circuit
DIGITAL INTERFACE
Though the AD7686 has a reduced number of pins, it offers
flexibility in its serial interface modes.
The AD7686, when in CS mode, is compatible with SPI, QSPI,
digital hosts, and DSPs, such as Blackfin ADSP-BF53x or
ADSP-219x. This interface can use either 3-wire or 4-wire. A
3-wire interface using the CNV, SCK, and SDO signals
minimizes wiring connections useful, for instance, in isolated
applications. A 4-wire interface using the SDI, CNV, SCK, and
SDO signals allows CNV, which initiates the conversions, to be
independent of the readback timing (SDI). This is useful in low
jitter sampling or simultaneous sampling applications.
The AD7686, when in chain mode, provides a daisy-chain
feature using the SDI input for cascading multiple ADCs on a
single data line similar to a shift register.
The mode in which the part operates depends on the SDI level
when the CNV rising edge occurs. The CS mode is selected if
SDI is high, and the chain mode is selected if SDI is low. The
SDI hold time is such that when SDI and CNV are connected
together, the chain mode is always selected.
In either mode, the AD7686 offers the flexibility to optionally
force a start bit in front of the data bits. This start bit can be
used as a busy signal indicator to interrupt the digital host and
trigger the data reading. Otherwise, without a busy indicator,
the user must timeout the maximum conversion time prior to
readback.
The busy indicator feature is enabled as follows:
In CS mode, if CNV or SDI is low when the ADC conversion
ends (see Figure 36 and Figure 40).
In chain mode, if SCK is high during the CNV rising edge
(see Figure 44).
相关PDF资料
PDF描述
MS3106F28-20S CONN PLUG 14POS STRAIGHT W/SCKT
T 3484 005 CONN MALE 7POS CABLE MNT R/A
LTC1419CG#TR IC ADC 14BIT 800KSPS SHDN 28SSOP
LTC1279IG#TRPBF IC A/DCONV SAMPLNG W/SHTDN24SSOP
D6FBX CONN RCPT FEMALE 6PIN BLK/SILVER
相关代理商/技术参数
参数描述
AD7686CCPZRL1 制造商:AD 制造商全称:Analog Devices 功能描述:16-Bit, 500 kSPS PulSAR ADC in MSOP/QFN
AD7686CCPZRL7 功能描述:IC ADC 16BIT SAR 500KSPS 10LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:PulSAR® 标准包装:1,000 系列:- 位数:12 采样率(每秒):300k 数据接口:并联 转换器数目:1 功率耗散(最大):75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC(0.295",7.50mm 宽) 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端,单极;1 个单端,双极
AD7686CCPZRL71 制造商:AD 制造商全称:Analog Devices 功能描述:16-Bit, 500 kSPS PulSAR ADC in MSOP/QFN
AD7686CRM 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 16-bit Serial 10-Pin MSOP Tube
AD7686CRMRL7 制造商:Analog Devices 功能描述:ADC Single SAR 500ksps 16-bit Serial 10-Pin MSOP T/R