- 您现在的位置：买卖IC网 > PDF目录10311 > AD7705BRZ-REEL (Analog Devices Inc)IC ADC 16BIT 2CHAN 16SOIC PDF资料下载
参数资料
| 型号： | AD7705BRZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 16/44页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT 2CHAN 16SOIC |
| 标准包装： | 1,000 |
| 位数： | 16 |
| 采样率（每秒）： | 500 |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 1mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 2 个差分，单极；2 个差分，双极 |
| 配用： | EVAL-AD7705EBZ-ND - BOARD EVALUATION FOR AD7705 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页
AD7705/AD7706
Rev. C | Page 23 of 44
On the AD7706, the voltages applied to the analog input
channels are referenced to the COMMON input. For example, if
AIN1() is 2.5 V and AD7705 is configured for unipolar
operation with a gain of 2 and a VREF of 2.5 V, the input voltage
range on the AIN1(+) input is 2.5 V to 3.75 V.
If AIN1() is 2.5 V and AD7705 is configured for bipolar mode
with a gain of 2 and a VREF of 2.5 V, the analog input range on
the AIN1(+) input is 1.25 V to 3.75 V (i.e., 2.5 V ± 1.25 V). If
AIN1() is at GND, the part cannot be configured for bipolar
ranges in excess of ±100 mV.
Bipolar or unipolar options are chosen by programming the
B/U bit of the setup register. This programs the channel for either
unipolar or bipolar operation. Programming the channel for
either unipolar or bipolar operation does not change the input
signal conditioning, it simply changes the data output coding
and the points on the transfer function where calibrations occur.
REFERENCE INPUT
The AD7705/AD7706 reference inputs, REF IN(+) and REF IN(),
provide a differential reference input capability. The common-
mode range for these differential inputs is from GND to VDD.
The nominal reference voltage, VREF (REF IN(+) REF IN()),
for specified operation is 2.5 V for the AD7705/AD7706 operated
with a VDD of 5 V, and 1.225 V for the AD7705/AD7706 operated
with a VDD of 3 V. The parts are functional with VREF voltages
down to 1 V, but performance will be degraded because the output
noise, in terms of LSB size, is larger. REF IN(+) must be greater
than REF IN() for correct operation of the AD7705/AD7706.
Both reference inputs provide a high impedance, dynamic load
similar to the analog inputs in unbuffered mode. The maximum
dc input leakage current is ±1 nA over temperature, and source
resistance might result in gain errors on the part. In this case,
the sampling switch resistance is 5 kΩ typ, and the reference
capacitor, CREF, varies with gain. The sample rate on the reference
inputs is fCLKIN/64 and does not vary with gain. For gains of 1
and 2, CREF is 8 pF; for gains of 16, 32, 64, and 128, it is 5.5 pF,
4.25 pF, 3.625 pF, and 3.3125 pF, respectively.
The output noise performance outlined in Table 5, Table 6,
effectively removes the effect of noise on the reference. To
obtain the noise performance shown in the noise tables over the
full input range requires a low noise reference source for the
AD7705/AD7706. If the reference noise in the bandwidth of
interest is excessive, it degrades the performance of the
AD7705/AD7706. In applications where the excitation voltage
for the bridge transducer on the analog input also derives the
reference voltage for the part, the effect of the noise in the
excitation voltage is removed because the application is
ratiometric.
Recommended reference voltage sources for the AD7705/
AD7706 with a VDD of 5 V include the AD780, REF43, and
REF192; the recommended reference sources for the AD7705/
AD7706 operated with a VDD of 3 V include the AD589 and
AD1580. It is generally recommended to decouple the output of
these references to reduce the noise level further.
DIGITAL FILTERING
The AD7705/AD7706 each contain an on-chip, low-pass digital
filter that processes the output of the Σ-Δ modulator. Therefore,
the parts not only provide the ADC function, but also provide a
level of filtering. There are a number of system differences when
the filtering function is provided in the digital domain, rather
than in the analog domain.
For example, because it occurs after the A/D conversion
process, digital filtering can remove noise injected during the
conversion process, whereas analog filtering cannot do this. In
addition, the digital filter can be made programmable far more
readily than the analog filter. Depending on the digital filter
design, this provides the user with the update rate.
On the other hand, analog filtering can remove noise
superimposed on the analog signal before it reaches the ADC.
Digital filtering cannot do this, and noise peaks riding on
signals near full scale have the potential to saturate the analog
modulator and digital filter, even though the average value of
the signal is within limits.
To alleviate this problem, the AD7705/AD7706 have overrange
headroom built into the Σ-Δ modulator and digital filter that
allows overrange excursions of 5% above the analog input range.
If noise signals are larger than this, consider filtering the analog
input, or reducing the input channel voltage so that its full scale
is half that of the analog input channel full scale. This provides
an overrange capability greater than 100% at the expense of
reducing the dynamic range by 1 bit (50%).
In addition, the digital filter does not provide any rejection at
integer multiples of the digital filter’s sample frequency. However,
the input sampling on the part provides attenuation at multiples
of the digital filter’s sampling frequency so that the unattenuated
bands occur around multiples of the sampling frequency, fS, as
defined in Table 23. Thus, the unattenuated bands occur at n × fS
(where n = 1, 2, 3 . . .). At these frequencies, there are frequency
bands ±f3 dB wide (f3 dB is the cutoff frequency of the digital filter)
at either side where noise passes unattenuated to the output.
相关PDF资料 |
PDF描述 |
|---|---|
| CXS3102A14S1S | CONN RCPT 3POS PNL MNT SKT |
| VE-BN1-IX-B1 | CONVERTER MOD DC/DC 12V 75W |
| AD9609BCPZRL7-65 | IC ADC 10BIT SPI/SRL 65M 32LFCSP |
| VE-BN1-IW-B1 | CONVERTER MOD DC/DC 12V 100W |
| AD7940BRMZ-REEL7 | IC ADC 14BIT 100KSPS 8MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7705BRZ-REEL1 | 制造商:AD 制造商全称:Analog Devices 功能描述:3 V/5 V, 1 mW, 2-/3-Channel, 16-Bit, Sigma-Delta ADCs |
| AD7705BRZ-REEL7 | 功能描述:IC ADC 16BIT 2CHAN 16SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| AD7705BRZ-REEL71 | 制造商:AD 制造商全称:Analog Devices 功能描述:3 V/5 V, 1 mW, 2-/3-Channel, 16-Bit, Sigma-Delta ADCs |
| AD7705EB | 制造商:AD 制造商全称:Analog Devices 功能描述:3 V/5 V 1 mW 2-/3-Channel 16-Bit Sigma-Delta ADCs(264.12 k) |
| AD7706 | 制造商:AD 制造商全称:Analog Devices 功能描述:3 V/5 V, 1 mW 2-/3-Channel 16-Bit, Sigma-Delta ADCs |
发布紧急采购，3分钟左右您将得到回复。