参数资料
型号: AD7711AR-REEL7
厂商: Analog Devices Inc
文件页数: 15/28页
文件大小: 0K
描述: IC ADC 24BIT RTD I SOURCE 24SOIC
标准包装: 400
位数: 24
采样率(每秒): 1.03k
数据接口: 串行
转换器数目: 1
功率耗散(最大): 52.5mW
电压电源: 模拟和数字,双 ±
工作温度: -40°C ~ 80°C
安装类型: 表面贴装
封装/外壳: 24-SOIC(0.295",7.50mm 宽)
供应商设备封装: 24-SOIC W
包装: 带卷 (TR)
输入数目和类型: 1 个单端,单极;1 个单端,双极;1 个差分,单极;1 个差分,双极
REV. G
–22–
AD7711
Figures 12a and 12b show timing diagrams for reading from the
AD7711 in external clocking mode. In Figure 12a, all the data is
read from the AD7711 in one operation. In Figure 12b, the data
is read from the AD7711 over a number of read operations. Both
read operations show a read from the AD7711’s output data
register. A read from the control register or calibration registers is
similar, but, in these cases, the
DRDY line is not related to the
read function. Depending on the output update rate, it can go
low at any stage in the control/calibration register read cycle
without affecting the read, and its status should be ignored. A
read operation from either the control or calibration registers
must always read 24 bits of data.
Figure 12a shows a read operation from the AD7711 where
RFS remains low for the duration of the data-word transmission.
With
DRDY low, the RFS input is brought low. The input
SCLK signal should be low between read and write operations.
RFS going low places the MSB of the word to be read on the
serial data line. All subsequent data bits are clocked out on a
high to low transition of the serial clock and are valid prior to
the following rising edge of this clock. The penultimate falling
edge of SCLK clocks out the LSB and the final falling edge
resets the
DRDY line high. This rising edge of DRDY turns off
the serial data output.
Figure 12b shows a timing diagram for a read operation where
RFS returns high during the transmission of the word and
returns low again to access the rest of the data-word. Timing
parameters and functions are very similar to that outlined for
Figure 12a, but Figure 12b has a number of additional times to
show timing relationships when
RFS returns high in the middle
of transferring a word.
RFS should return high during a low time of SCLK. On the
rising edge of
RFS, the SDATA output is turned off. DRDY
remains low and will remain low until all bits of the data-word
are read from the AD7711, regardless of the number of times
RFS changes state during the read operation. Depending on the
time between the falling edge of SCLK and the rising edge of
RFS, the next bit (BIT N+1) may appear on the data bus before
RFS goes high. When RFS returns low again, it activates the
SDATA output. When the entire word is transmitted, the
DRDY line will go high, turning off the SDATA output as shown
in Figure 12a.
t20
SDATA (O)
SCLK (I)
RFS (I)
A0 (I)
DRDY (O)
t22
t24
t25
t26
t27
t29
t28
t23
t21
THREE-STATE
MSB
LSB
Figure 12a. External Clocking Mode, Output Data Read Operation
t20
SDATA (O)
SCLK (I)
RFS (I)
A0 (I)
DRDY (O)
t22
t24
t25
t26
t27
t24
t25
THREE-STATE
MSB
t30
t31
BIT N
BIT N+1
Figure 12b. External Clocking Mode, Output Data Read Operation (
RFS Returns High during Read Operation)
相关PDF资料
PDF描述
MS3106R18-11PX CONN PLUG 5POS STRAIGHT W/PINS
MS3101F14S-9P CONN RCPT 2POS FREE HNG W/PINS
LTC1609AISW IC ADC SRL 16BIT 200KSPS 20-SOIC
LTC1383CN#PBF IC TXRX 5V RS232 LOW PWR 16-DIP
MS3101E14S-9P CONN RCPT 2POS FREE HNG W/PINS
相关代理商/技术参数
参数描述
AD7711ARZ 功能描述:IC ADC 24BIT RTD I SOURCE 24SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率(每秒):1M 数据接口:串行,SPI? 转换器数目:1 功率耗散(最大):- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘(4x4) 包装:Digi-Reel® 输入数目和类型:8 个单端,单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6
AD7711ARZ 制造商:Analog Devices 功能描述:LC 2MOS SIGNAL CONDITIONING ANALOG/DIGIT
AD7711ARZ-REEL 功能描述:IC ADC 24BIT RTD I SOURCE 24SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
AD7711ARZ-REEL7 功能描述:IC ADC 24BIT RTD I SOURCE 24SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
AD7711ASQ 功能描述:模数转换器 - ADC CMOS 24B w/ Matched RTD Excitation Crnt RoHS:否 制造商:Analog Devices 通道数量: 结构: 转换速率: 分辨率: 输入类型: 信噪比: 接口类型: 工作电源电压: 最大工作温度: 安装风格: 封装 / 箱体: