参数资料
型号: AD7719BRZ
厂商: Analog Devices Inc
文件页数: 18/40页
文件大小: 0K
描述: IC ADC 16BIT 24BIT DUAL 28SOIC
标准包装: 27
位数: 16/24
采样率(每秒): 105
数据接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
转换器数目: 2
功率耗散(最大): 4.5mW
电压电源: 模拟和数字
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 28-SOIC(0.295",7.50mm 宽)
供应商设备封装: 28-SOIC W
包装: 管件
输入数目和类型: 3 个差分,单极;3 个差分,双极
REV. A
AD7719
–25–
Table XVI. IOCON (I/O and Current Source Control Register) Bit Designations
Bit
Location
Name
Description
IOCON15
PSW2
Power Switch 2 Control Bit.
Set by user to enable power switch P2 to PWRGND.
Cleared by user to enable use as a standard I/O pin.
When the ADC is in standby mode, the power switches are open.
IOCON14
PSW1
Power Switch 1 Control Bit.
Set by user to enable power switch P1 to PWRGND.
Cleared by user to enable use as a standard I/O pin.
When ADC is in standby mode, the power switches are open.
IOCON13
0
This bit must be zero for correct operation.
IOCON12
BO
Burnout Current Enable Bit.
Set by user to enable the 100 nA current sources in the main ADC signal path. A 100 nA current source is
applied to the positive input leg while a 100 nA sink is applied to the negative input.
Cleared by user to disable both transducer burnout current sources.
IOCON11
I2PIN
IEXE2, 200 A Current Source Direction Bit.
Set by user to enable IEXC2 current source to IOUT1.
Cleared by user to enable IEXC2 current source to IOUT2.
IOCON10
I1PIN
IEXE1, 200 A Current Source Direction Bit.
Set by user to enable IEXC1 current source to IOUT2.
Cleared by user to enable IEXC1 current source to IOUT1.
IOCON9
I2EN
IEXC2 Current Source Enable Bit.
Set by user to turn on the IEXC2 excitation current source.
Cleared by user to turn off the IEXC2 excitation current source.
IOCON8
I1EN
IEXC1 Current Source Enable Bit.
Set by user to turn on the IEXC1 excitation current source.
Cleared by user to turn off the IEXC1 excitation current source.
IOCON7
P4DIR
P4, I/O Direction Control Bit.
Set by user to enable P4 as an output.
Cleared by user to enable P4 as an input. There are weak active pull-ups internally when enabled as an input.
IOCON6
P3DIR
P3, I/O Direction Control Bit.
Set by user to enable P3 as an output.
Cleared by user to enable P3 as an input. There are weak active pull-ups internally when enabled as an input.
IOCON5
P2EN
P2 Digital Output Enable Bit.
Set by user to enable P2 as a regular digital output pin.
Cleared by user to three-state P2 output.
PSW2 takes precedence over P2EN.
IOCON4
P1EN
P1 Digital Output Enable Bit.
Set by user to enable P1 as a regular digital output pin.
Cleared by user to three-state P1 output.
PSW1 takes precedence over P1EN.
IOCON3
P4DAT
Digital I/O Port Data Bits.
IOCON2
P3DAT
The readback values of these bits indicate the status of their respective pin when the I/O port is active as
IOCON1
P2DAT
an input.
IOCON0
P1DAT
The values written to these data bits appear at the output port when the I/O bits are enabled as outputs.
P2 and P1 are outputs only, so reading P2DAT and P1DAT will return what was last written to these bits.
相关PDF资料
PDF描述
AD7720BRU IC MODULATOR SIGMA-DELTA 28TSSOP
AD7721AR IC ADC 16BIT SIGMA-DELTA 28-SOIC
AD7722ASZ IC ADC 16BIT 195KSPS 44-MQFP
AD7723BSZ-REEL IC ADC 16BIT SIGMA-DELTA 44MQFP
AD7725BSZ IC ADC 16BIT PROG 44MQFP
相关代理商/技术参数
参数描述
AD7720 制造商:AD 制造商全称:Analog Devices 功能描述:CMOS Sigma-Delta Modulator
AD7720BRU 功能描述:IC MODULATOR SIGMA-DELTA 28TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率(每秒):300k 数据接口:并联 转换器数目:1 功率耗散(最大):75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC(0.295",7.50mm 宽) 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端,单极;1 个单端,双极
AD7720BRU-REEL 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 25Msps 16-bit Serial 28-Pin TSSOP T/R
AD7720BRU-REEL7 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 25Msps 16-bit Serial 28-Pin TSSOP T/R 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel
AD7720BRUZ 功能描述:IC MODULATOR SIGMA-DELTA 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率(每秒):300k 数据接口:并联 转换器数目:1 功率耗散(最大):75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC(0.295",7.50mm 宽) 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端,单极;1 个单端,双极