- 您现在的位置：买卖IC网 > PDF目录10298 > AD7788BRM (Analog Devices Inc)IC ADC 16BIT LP 10-MSOP PDF资料下载
参数资料
| 型号： | AD7788BRM |
| 厂商： | Analog Devices Inc |
| 文件页数： | 20/20页 |
| 文件大小： | 0K |
| 描述： | IC ADC 16BIT LP 10-MSOP |
| 标准包装： | 50 |
| 位数： | 16 |
| 采样率（每秒）： | 16.6 |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 230µW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
| 输入数目和类型： | 1 个差分，单极；1 个差分，双极 |
AD7788/AD7789
Rev. B | Page 9 of 20
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
03539-005
AD7788/
AD7789
TOP VIEW
(Not to Scale)
SCLK 1
CS 2
AIN(+) 3
AIN(–) 4
REFIN(+) 5
DIN
DOUT/RDY
VDD
GND
REFIN(–)
10
9
8
7
6
Figure 5. Pin Configuration
Table 6. Pin Function Descriptions
Pin No.
Mnemonic
Description
1
SCLK
Serial Clock Input for Data Transfers to and from the ADC. The SCLK has a Schmitt-triggered input, making the
interface suitable for opto-isolated applications. The serial clock can be continuous, with all data transmitted in
a continuous train of pulses. Alternatively, it can be a noncontinuous clock with the information being trans-
mitted to or from the ADC in smaller batches of data.
2
CS
Chip Select Input. This is an active low logic input used to select the ADC. CS can be used to select the ADC in
systems with more than one device on the serial bus or as a frame synchronization signal in communicating
with the device. CS can be hardwired low, allowing the ADC to operate in 3-wire mode with SCLK, DIN, and
DOUT/RDY used to interface with the device.
3
AIN(+)
Analog Input. AIN(+) is the positive terminal of the fully differential analog input.
4
AIN()
Analog Input. AIN(–) is the negative terminal of the fully differential analog input.
5
REFIN(+)
Positive Reference Input. REFIN(+) can lie anywhere between VDD and GND + 0.1 V. The nominal reference
voltage (REFIN(+) REFIN()) is 2.5 V, but the part functions with a reference from 0.1 V to VDD.
6
REFIN()
Negative Reference Input. This reference input can lie anywhere between GND and VDD 0.1 V.
7
GND
Ground Reference Point.
8
VDD
Supply Voltage. 3 V or 5 V nominal.
9
DOUT/RDY
The DOUT/RDY falling edge can be used as an interrupt to a processor, indicating that valid data is available.
With an external serial clock, the data can be read using the DOUT/RDY pin. With CS low, the data/control word
information is placed on the DOUT/RDY pin on the SCLK falling edge and is valid on the SCLK rising edge.
The end of a conversion is also indicated by the RDY bit in the status register. When CS is high, the DOUT/RDY
pin is three-stated, but the RDY bit remains active.
10
DIN
Serial Data Input to the Input Shift Register on the ADC. Data in this shift register is transferred to the control
registers within the ADC; the register selection bits of the communications register identify the appropriate
register.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7783BRU-REEL | IC ADC 24BIT 2CH R-R 16-TSSOP |
| D38999/26FE6AC | CONN HSG PLUG 6POS STRGHT PINS |
| AD7813YRUZ | IC ADC 10BIT PARALLEL 16TSSOP |
| MS27656T25B24B | CONN HSG RCPT 24POS WALL MT SCKT |
| D38999/26JF32PNLC | CONN HSG PLUG 32POS STRGHT PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7788BRM-REEL | 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 16.6sps 16-bit Serial 10-Pin MSOP T/R 制造商:Analog Devices 功能描述:ADC SGL DELTA-SIGMA 0.0166KSPS 16BIT SERL 10MSOP - Tape and Reel |
| AD7788BRMZ | 功能描述:IC ADC 16BIT LP 10-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD7788BRMZ | 制造商:Analog Devices 功能描述:IC SM 16-BIT ADC |
| AD7788BRMZ1 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Power, 16-/24-Bit, Sigma-Delta ADCs |
| AD7788BRMZ-REEL | 功能描述:IC ADC 16BIT SIGMA-DELTA 10MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
发布紧急采购，3分钟左右您将得到回复。