参数资料
| 型号： | AD812ARZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 6/16页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP DUAL CURR-FDBK 8-SOIC |
| 标准包装： | 98 |
| 应用： | 电流反馈 |
| 电路数： | 2 |
| -3db带宽： | 145MHz |
| 转换速率： | 1600 V/µs |
| 电流 - 电源： | 4.5mA |
| 电流 - 输出 / 通道： | 50mA |
| 电压 - 电源，单路/双路(±)： | 2.4 V ~ 36 V，±1.2 V ~ 18 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
| 产品目录页面： | 769 (CN2011-ZH PDF) |
AD812
REV. B
–14–
1
10
1000
100
FREQUENCY – MHz
6
9
3
0
–3
CLOSED-LOOP
GAIN
–
dB
12
–6
–9
VS = 15V
G = +2
RF = 750
RL = 1k
CL = 510pF, RS = 15
CL = 150pF, RS = 30
Figure 43. Response to Large Load Capacitor, VS = ±15 V
10
100
0%
100ns
5V
VIN
VOUT
90
Figure 44. Pulse Response of Circuit of Figure 41 with
CL = 510 pF, RL = 1 k
, R
F = RG = 715
, R
S = 15
Overload Recovery
There are three important overload conditions to consider.
They are due to input common mode voltage overdrive, input
current overdrive, and output voltage overdrive. When the
amplifier is configured for low closed-loop gains, and its input
common-mode voltage range is exceeded, the recovery time will
be very fast, typically under 10 ns. When configured for a higher
gain, and overloaded at the output, the recovery time will also
be short. For example, in a gain of +10, with 6 dB of input
overdrive, the recovery time of the AD812 is about 10 ns.
10
90
100
0%
2V
1V
50ns
VIN
VOUT
Figure 45. 6 dB Overload Recovery; G = 10, RL = 500 ,
VS = ±5 V
In the case of high gains with very high levels of input overdrive,
a longer recovery time may occur. For example, if the input
common-mode voltage range is exceeded in a gain of +10, the
recovery time will be on the order of 100 ns. This is primarily
due to current overloading of the input stage.
As noted in the warning under “Maximum Power Dissipation,”
a high level of input overdrive in a high noninverting gain circuit
can result in a large current flow in the input stage. For differ-
ential input voltages of less than about 1.25 V, this will be inter-
nally limited to less than 20 mA (decreasing with supply voltage).
For input overdrives which result in higher differential input
voltages, power dissipation in the input stage must be consid-
ered. It is recommended that external diode clamps be used in
cases where the differential input voltage is expected to exceed
1.25 V.
High Performance Video Line Driver
At a gain of +2, the AD812 makes an excellent driver for a back-
terminated 75
video line. Low differential gain and phase
errors and wide 0.1 dB bandwidth can be realized over a wide
range of power supply voltage. Outstanding gain and group
delay matching are also attainable over the full operating supply
voltage range.
AD812
8
4
RG
RF
VIN
75
VOUT
75
+VS
0.1 F
–VS
75
CABLE
75
CABLE
75
Figure 46. Gain of +2 Video Line Driver (RF = RG from
Table I)
相关PDF资料 |
PDF描述 |
|---|---|
| AD810ARZ | IC CURR-FDBK AMP VIDEO LP 8-SOIC |
| AD830ARZ | IC VIDEO DIFF AMP HS 8-SOIC |
| VE-B64-MY-B1 | CONVERTER MOD DC/DC 48V 50W |
| AD828ARZ | IC VIDEO OPAMP DUAL LP 8-SOIC |
| VE-B63-MY-B1 | CONVERTER MOD DC/DC 24V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD812ARZ | 制造商:Analog Devices 功能描述:Operational Amplifier (Op-Amp) IC |
| AD812ARZ-REEL | 功能描述:IC OPAMP DUAL CURR-FDBK 8-SOIC RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
| AD812ARZ-REEL7 | 功能描述:IC OPAMP DUAL CURR-FDBK 8-SOIC RoHS:是 类别:集成电路 (IC) >> 线性 - 放大器 - 视频放大器和频缓冲器 系列:- 标准包装:1,000 系列:- 应用:驱动器 输出类型:差分 电路数:3 -3db带宽:350MHz 转换速率:1000 V/µs 电流 - 电源:14.5mA 电流 - 输出 / 通道:60mA 电压 - 电源，单路/双路(±):5 V ~ 12 V，±2.5 V ~ 6 V 安装类型:表面贴装 封装/外壳:20-VFQFN 裸露焊盘 供应商设备封装:20-QFN 裸露焊盘（4x4） 包装:带卷 (TR) |
| AD813 | 制造商:AD 制造商全称:Analog Devices 功能描述:Single Supply, Low Power Triple Video Amplifier |
| AD8130 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost 270 MHz Differential Receiver Amplifiers |
发布紧急采购，3分钟左右您将得到回复。