参数资料
| 型号： | AD8366ACPZ-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 15/28页 |
| 文件大小： | 0K |
| 描述： | IC DUAL AMP VGA 32LFCSP |
| 标准包装： | 1 |
| 放大器类型： | 可变增益 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 转换速率： | 1100 V/µs |
| -3db带宽： | 600MHz |
| 电流 - 电源： | 180mA |
| 电压 - 电源，单路/双路(±)： | 4.75 V ~ 5.25 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ |
| 包装： | 标准包装 |
| 其它名称： | AD8366ACPZ-R7DKR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD8366
Rev. A | Page 22 of 28
CHARACTERIZATION SETUPS
extensively to characterize the AD8366. Characterization was
done on single-ended and differential evaluation boards. The
bulk of the characterization was done using an automated VEE
program to control the equipment as shown in Figure 58. This
setup was used to measure P1dB, OIP3, OIP2, IMD2, IMD3,
harmonic distortion, gain, gain error, supply current, and noise
density. All measurements were done with a 200 Ω load. All balun,
output matching network, and filter losses were de-embedded.
Gain error was measured with constant input power. All other
measurements were done on 2 V p-p (4 dBm, re: 200 Ω) on
the output of the device under test (DUT), and 2 V p-p composite
output for two-tone measurements. To measure harmonic
distortion, band-pass and band-reject filters were used on
the input and output of the DUT.
Figure 59 shows the setup used to make differential measurements.
All measurements on this setup were done in a 50 Ω system and
post processed to reference the measurements to a 200 Ω system.
Gain and phase mismatch were measured with 2 V p-p on the
output, and small signal frequency responses were measured
with 30 dBm on the input of the DUT.
相关PDF资料 |
PDF描述 |
|---|---|
| AD8367ARU | IC AMP VGA 14TSSOP |
| AD8368ACPZ-WP | IC AMP VGA 24LFCSP |
| AD8369ARUZ-REEL7 | IC AMP VGA 16TSSOP |
| AD8370ARE-REEL7 | IC AMP VGA DIFF LN 16TSSOP |
| AD8372ACPZ-R7 | IC AMP VGA DIFF DUAL LN 32LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8366-EVALZ | 制造商:AD 制造商全称:Analog Devices 功能描述:DC to 500 MHz, Dual Digital Gain Trim Amplifier |
| AD8367 | 制造商:AD 制造商全称:Analog Devices 功能描述:500 MHz, Linear-in-dB VGA with AGC Detector |
| AD8367_05 | 制造商:AD 制造商全称:Analog Devices 功能描述:500 MHz, Linear-in-dB VGA with AGC Detector |
| AD8367ARU | 功能描述:IC AMP VGA 14TSSOP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:X-AMP® 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD8367ARU-REEL | 制造商:Analog Devices 功能描述: |
发布紧急采购，3分钟左右您将得到回复。