- 您现在的位置：买卖IC网 > PDF目录378278 > ADC0816 (National Semiconductor Corporation) 8-BitμP Compatible A/D Converters with 16-Channel Multiplexer(带16通道多路器的8位μP兼容A/D转换器) PDF资料下载
参数资料
| 型号： | ADC0816 |
| 厂商： | National Semiconductor Corporation |
| 元件分类： | 串行ADC |
| 英文描述： | 8-BitμP Compatible A/D Converters with 16-Channel Multiplexer(带16通道多路器的8位μP兼容A/D转换器) |
| 中文描述： | 8BitμP兼容的A / D转换器的16通道多路复用器（带16通道多路器的8位微处理器兼容的A / D转换器） |
| 文件页数： | 7/13页 |
| 文件大小： | 245K |
| 代理商： | ADC0816 |
Timing Diagram
(Continued)
The successive approximation register (SAR) performs 8 it-
erations to approximate the input voltage. For any SAR type
converter, n-iterations are required for an n-bit converter.
Figure 2 shows a typical example of a 3-bit converter. In the
ADC0816, ADC0817, the approximation technique is ex-
tended to 8 bits using the 256R network.
The A/D converter’s successive approximation register
(SAR) is reset on the positive edge of the start conversion
(SC) pulse. The conversion is begun on the falling edge of
the start conversion pulse.Aconversion in process will be in-
terrupted by receipt of a new start conversion pulse. Con-
tinuous conversion may be accomplished by tying the
end-of-conversion (EOC) output to the SC input. If used in
this mode, an external start conversion pulse should be ap-
plied after power up. End-of-conversion will go low between
0 and 8 clock pulses after the rising edge of start conversion.
The most important section of the A/D converter is the com-
parator. It is this section which is responsible for the ulimate
accuracy of the entire converter. It is also the comparator
drift which has the greatest influence on the repeatability of
the device. A chopper-stabilized comparator provides the
most effective method of satisfying all the converter require-
ments.
The chopper-stabilized comparator converts the DC input
signal into an AC signal. This signal is then fed through a
high gain AC amplifier and has the DC level restored. This
technique limits the drift component of the amplifier since the
drift is a DC component which is not passed by the AC am-
plifier. This makes the entire A/D converter extremely insen-
sitive to temperature, long term drift and input offset errors.
Figure 4 shows a typical error curve for the ADC0816 as
measured using the procedures outlined in AN-179.
www.national.com
7
相关PDF资料 |
PDF描述 |
|---|---|
| ADC0817 | 8-BitμP Compatible A/D Converters with 16-Channel Multiplexer(带16通道多路器的8位μP兼容A/D转换器) |
| ADC0816CCJ | 8-Bit レP Compatible A/D Converters with 16-Channel Multiplexer |
| ADC0816CCN | 8-Bit レP Compatible A/D Converters with 16-Channel Multiplexer |
| ADC0817CCN | 8-Bit レP Compatible A/D Converters with 16-Channel Multiplexer |
| ADC0819BCN | 8-Bit Serial I/O A/D Converter with 19-Channel Multiplexer |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADC0816_07 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:8-Bit レP Compatible A/D Converters with 16-Channel Multiplexer |
| ADC08161 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:500 ns A/D Converter with S/H Function and 2.5V Bandgap Reference |
| ADC08161BIJ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog-to-Digital Converter， 8-Bit |
| ADC08161CIJ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog-to-Digital Converter， 8-Bit |
| ADC08161CIWM | 功能描述:IC ADC 500NS S/H 2.5V REF 20SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率（每秒）:3M 数据接口:- 转换器数目:- 功率耗散（最大）:- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:- |
发布紧急采购，3分钟左右您将得到回复。