参数资料
型号: ADE7762ARWZ
厂商: Analog Devices Inc
文件页数: 11/28页
文件大小: 0K
描述: IC ENERGY METERING 3PHASE 28SOIC
标准包装: 27
输入阻抗: 410 千欧
测量误差: 0.1%
电压 - 高输入/输出: 2.4V
电压 - 低输入/输出: 0.8V
电流 - 电源: 8.5mA
电源电压: 4.75 V ~ 5.25 V
测量仪表类型: 3 相
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 28-SOIC(0.295",7.50mm 宽)
供应商设备封装: 28-SOIC W
包装: 管件
配用: EVAL-ADE7762EBZ-ND - BOARD EVALUATION FOR ADE7762

ADE7762
TERMINOLOGY
? × 100 % (1)
? Energy Reg istered by ADE7762 – True Energ y ?
?
?
Measurement Error
The error associated with the energy measurement made by the
ADE7762 is defined by the following formula:
Percentage Error =
?
? True Energ y ?
Error Between Channels
The high-pass filter (HPF) in the current channel has a phase
lead response. To offset this phase response and equalize the
phase response between channels, a phase correction network
is placed in the current channel. The phase correction network
ensures a phase match between the current channels and the
voltage channels to within ±0.1° over a range of 45 Hz to 65 Hz
ADC Offset Error
This refers to the dc offset associated with the analog inputs
to the ADCs. It means that with the analog inputs connected
to AGND, the ADCs still see an analog input signal offset.
However, because the HPF is always present, the offset is re-
moved from the current channel, and the power calculation
is not affected by this offset.
Gain Error
The gain error of the ADE7762 is defined as the difference
between the measured output frequency (minus the offset)
and the ideal output frequency. The difference is expressed
as a percentage of the ideal frequency. The ideal frequency is
obtained from the ADE7762 transfer function (see the Transfer
Function section).
and ±0.2° over a range of 40 Hz to 1 kHz (see Figure 24 and
Figure 25).
Power Supply Rejection (PSR)
This quantifies the ADE7762 measurement error as a percent-
age of reading when the power supplies are varied.
For the ac PSR measurement, a reading at a nominal supply
(5 V) is taken. A 200 mV rms/100 Hz signal is then introduced
onto the supply, and a second reading is obtained under the
same input signal levels. Any error introduced is expressed as a
percentage of reading. See the definition for Measurement Error.
For the dc PSR measurement, a reading at nominal supplies
(5 V) is taken. The supply is then varied ±5%, and a second
reading is obtained with the same input signal levels. Any
error introduced is again expressed as a percentage of reading.
Rev. 0 | Page 11 of 28
相关PDF资料
PDF描述
GEM24DTMD CONN EDGECARD 48POS R/A .156 SLD
SS1P5L-E3/85A DIODE SCHOTTKY 1A 50V SMP
ESA50DTBD-S664 CONN EDGECARD 100PS R/A .125 SLD
ADE7769ARZ IC ENERGY METERING 1PHASE 16SOIC
MBRB60H100CTT4G DIODE SCHOTTKY 100V 30A H D2PAK
相关代理商/技术参数
参数描述
ADE7762ARWZ-RL 功能描述:IC ENERGY METERING 3PHASE 28SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:*
ADE7763 制造商:AD 制造商全称:Analog Devices 功能描述:Single-Phase Active and Apparent Energy Metering IC
ADE7763_13 制造商:AD 制造商全称:Analog Devices 功能描述:Single-Phase Active and Apparent Energy Metering IC
ADE7763ARS 制造商:Analog Devices 功能描述:Energy Measurement 20-Pin SSOP 制造商:Rochester Electronics LLC 功能描述:1 PHASE ACTIVE AND APPARENT ENERGY IC - Bulk
ADE7763ARSRL 制造商:Analog Devices 功能描述:Energy Measurement 20-Pin SSOP T/R