- 您现在的位置：买卖IC网 > PDF目录298814 > ADF7011BRUZ-REEL (ANALOG DEVICES INC) SPECIALTY TELECOM CIRCUIT, PDSO24 PDF资料下载
参数资料
| 型号： | ADF7011BRUZ-REEL |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 通信及网络 |
| 英文描述： | SPECIALTY TELECOM CIRCUIT, PDSO24 |
| 封装： | MO-153AD, TSSOP-24 |
| 文件页数： | 21/24页 |
| 文件大小： | 567K |
| 代理商： | ADF7011BRUZ-REEL |
REV. 0
–6–
ADF7011
PIN FUNCTION DESCRIPTIONS (continued)
Pin No.
Mnemonic
Function
15
OSC1
Oscillator Pin. For use with crystal reference only. This is three-stated when an external reference oscilla-
tor is used.
16
VCOGND
Voltage Controlled Oscillator Ground.
17
TEST
Input to the RF Fractional-N Divider. This pin allows the user to connect an external VCO to the part.
Disabling the internal VCO activates this pin. If the internal VCO is used, this pin should be grounded.
18
DVDD
Positive Supply for the Digital Circuitry. This must be between 2.3 V and 3.6 V. Decoupling capacitors
to the analog ground plane should be placed as close as possible to this pin.
19
RFGND
Ground for Output Stage of Transmitter.
20
RFOUT
The modulated signal is available at this pin. Output power levels are from –16 dBm to +12 dBm. The
output should be impedance matched to the desired load using suitable components. See the RF Output
Stage section.
21
AGND
Ground Pin for the RF Analog Circuitry.
22
VCOIN
The tuning voltage on this pin determines the output frequency of the Voltage Controlled Oscillator
(VCO). The higher the tuning voltage, the higher the output frequency.
23
CVCO
A 0.22
F capacitor should be added to reduce noise on VCO bias lines. Tied to the C
REG pin.
24
CREG
A 2.2
F capacitor should be added at C
REG, tied to GND, to reduce regulator noise and improve
stability. A reduced capacitor will improve regulator power-on time but may cause higher spurious
components.
相关PDF资料 |
PDF描述 |
|---|---|
| ADG508FBRNZ-REEL7 | 8-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16 |
| ADG5408BRUZ | 8-CHANNEL, SGL ENDED MULTIPLEXER, PDSO16 |
| ADG751ARM-REEL | 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO8 |
| ADG751BRM-REEL | 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO8 |
| ADL5534ACPZ-R2 | 20 MHz - 500 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADF7011BRUZ-RL | 功能描述:IC XMITTER ASK/FSK/GFSK 24TSSOP RoHS:是 类别:RF/IF 和 RFID >> RF 发射器 系列:- 标准包装:4,000 系列:- 频率:310MHz ~ 440MHz 应用:- 调制或协议:UHF，ASK 数据传输率 - 最大:20 kBaud 功率 - 输出:1dBm ~ 5dBm 电流 - 传输:10mA 数据接口:PCB，表面贴装 天线连接器:PCB，表面贴装 存储容量:- 特点:- 电源电压:2.2 V ~ 4 V 工作温度:-40°C ~ 85°C 封装/外壳:16-LSSOP（0.154"，3.90mm 宽） 包装:带卷 (TR) |
| ADF7011BRUZ-RL7 | 功能描述:IC XMITTER ASK/FSK/GFSK 24TSSOP RoHS:是 类别:RF/IF 和 RFID >> RF 发射器 系列:- 标准包装:4,000 系列:- 频率:310MHz ~ 440MHz 应用:- 调制或协议:UHF，ASK 数据传输率 - 最大:20 kBaud 功率 - 输出:1dBm ~ 5dBm 电流 - 传输:10mA 数据接口:PCB，表面贴装 天线连接器:PCB，表面贴装 存储容量:- 特点:- 电源电压:2.2 V ~ 4 V 工作温度:-40°C ~ 85°C 封装/外壳:16-LSSOP（0.154"，3.90mm 宽） 包装:带卷 (TR) |
| ADF7012 | 制造商:AD 制造商全称:Analog Devices 功能描述:Multichannel ISM Band FSK/GFSK/OOK/GOOK/ASK Transmitter |
| ADF7012BRU | 制造商:Analog Devices 功能描述:RF Transmitter ASK/FSK 2.5V/3.3V 24-Pin TSSOP 制造商:Analog Devices 功能描述:IC TRANSMITTER UHF |
| ADF7012BRU-REEL | 功能描述:IC XMITTER ASK/FSK/GFSK 24TSSOP RoHS:否 类别:RF/IF 和 RFID >> RF 发射器 系列:- 标准包装:4,000 系列:- 频率:310MHz ~ 440MHz 应用:- 调制或协议:UHF，ASK 数据传输率 - 最大:20 kBaud 功率 - 输出:1dBm ~ 5dBm 电流 - 传输:10mA 数据接口:PCB，表面贴装 天线连接器:PCB，表面贴装 存储容量:- 特点:- 电源电压:2.2 V ~ 4 V 工作温度:-40°C ~ 85°C 封装/外壳:16-LSSOP（0.154"，3.90mm 宽） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。