参数资料
| 型号： | ADG1201BRJZ-R2 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH SPST NO SOT23 |
| 标准包装： | 1 |
| 系列： | iCMOS® |
| 功能： | 开关 |
| 电路： | 1 x SPST - NO |
| 导通状态电阻： | 475 欧姆 |
| 电压电源： | 单/双电源 |
| 电压 - 电源，单路/双路(±)： | 12V，±15V |
| 电流 - 电源： | 60µA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 |
| 供应商设备封装： | SOT-23-6 |
| 包装： | 标准包装 |
| 其它名称： | ADG1201BRJZ-R2DKR |
ADG1201/ADG1202
Rev. 0 | Page 12 of 16
TERMINOLOGY
IDD
The positive supply current.
ISS
The negative supply current.
VD (VS)
The analog voltage on Terminal D and Terminal S.
RON
The ohmic resistance between D and S.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
ID, IS (On)
The channel leakage current with the switch on.
VINL
The maximum input voltage for Logic 0.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (Off)
The off switch source capacitance, measured with reference
to ground.
CD (Off)
The off switch drain capacitance, measured with reference
to ground.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
CIN
The digital input capacitance.
tON
The delay between applying the digital control input and the
output switching on. See Figure 26.
tOFF
The delay between applying the digital control input and the
output switching off. See Figure 26.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
ACPSRR (AC Power Supply Rejection Ratio)
Measures the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is
the ACPSRR.
相关PDF资料 |
PDF描述 |
|---|---|
| ADG1204YRUZ-REEL7 | IC MULTIPLEXER 4X1 14TSSOP |
| ADG1207YRUZ-REEL7 | IC MULTIPLEXER DUAL 8X1 28TSSOP |
| ADG1209YRZ | IC MULTIPLEXER DUAL 4X1 16SOIC |
| ADG1213YCPZ-500RL7 | IC SWITCH QUAD SPST 16LFCSP |
| ADG1219BRJZ-REEL7 | IC SWITCH SPDT SOT23-8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADG1201BRJZ-REEL7 | 功能描述:IC SWITCH SPST NO SOT23 RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:iCMOS® 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源，单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ADG1202 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Capacitance, Low Charge Injection, 【15 V/+12 V iCMOS SPST in SOT-23 |
| ADG1202BRJZ-R2 | 制造商:Analog Devices 功能描述:ANLG SW SGL SPST 16.5V/16.5V - Tape and Reel |
| ADG1202BRJZ-REEL7 | 制造商:Analog Devices 功能描述:ANLG SW SGL SPST 16.5V/16.5V - Tape and Reel |
| ADG1204 | 制造商:AD 制造商全称:Analog Devices 功能描述:2 pF Off Capacitance, 1 pC Charge Injection, +-15 V/12 V 4:1 iCMOS Multiplexer |
发布紧急采购，3分钟左右您将得到回复。