参数资料
型号: ADG1414BRUZ-REEL7
厂商: Analog Devices Inc
文件页数: 10/20页
文件大小: 0K
描述: IC SW SPST 9.5OHM RON 24TSSOP
标准包装: 1,000
系列: iCMOS®
功能: 开关
电路: 8 x SPST - NO
导通状态电阻: 21.5 欧姆
电压电源: 单/双电源
电压 - 电源,单路/双路(±): 4.5 V ~ 16.5 V,±2.25 V ~ 8.25 V
电流 - 电源: 1nA
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 24-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 24-TSSOP
包装: 带卷 (TR)
ADG1414
Data Sheet
Rev. A | Page 18 of 20
TERMINOLOGY
IDD
The positive supply current.
ISS
The negative supply current.
VD (VS)
The analog voltage on Terminal Dx or Terminal Sx.
RON
The ohmic resistance between Terminal Dx and Terminal Sx.
Δ RON
The difference between the RON of any two channels.
RFLAT(ON)
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
IS (Off)
The source leakage current with the switch off.
ID (Off)
The drain leakage current with the switch off.
ID, IS (On)
The channel leakage current with the switch on.
VINL
The maximum input voltage for Logic 0.
VINH
The minimum input voltage for Logic 1.
IINL (IINH)
The input current of the digital input.
CS (Off)
The off switch source capacitance, measured with reference
to ground.
CD (Off)
The off switch drain capacitance, measured with reference to
ground.
CD, CS (On)
The on switch capacitance, measured with reference to ground.
CIN
The digital input capacitance.
tON
The delay between applying the digital control input and the
output switching on. See Figure 30.
tOFF
The delay between applying the digital control input and the
output switching off. See Figure 30.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
AC Power Supply Rejection Ratio (ACPSRR)
A measure of the ability of a part to avoid coupling noise and
spurious signals that appear on the supply voltage pin to the
output of the switch. The dc voltage on the device is modulated
by a sine wave of 0.62 V p-p. The ratio of the amplitude of
signal on the output to the amplitude of the modulation is the
ACPSRR.
相关PDF资料
PDF描述
ADG1419BRMZ-REEL7 IC SWITCH 2.1OHM SPDT 8MSOP
ADG1421BRMZ IC SW SPST 2.1OHM RON 10MSOP
ADG1434YRUZ-REEL7 IC SWITCH QUAD SPDT 20TSSOP
ADG1436YRUZ-REEL7 IC SWITCH DUAL SPDT 16TSSOP
ADG1438BRUZ-REEL7 IC MULTIPLEXER 8:1 20TSSOP
相关代理商/技术参数
参数描述
ADG1419 制造商:AD 制造商全称:Analog Devices 功能描述:2.1 Ω On Resistance, ±15 V/+12 V/±5 V iCMOS SPDT Switch
ADG1419BCPZ-REEL7 功能描述:IC SWITCH SPDT 4.6OHM 8LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 特色产品:MicroPak? 标准包装:1 系列:- 功能:开关 电路:2 x SPST - NC 导通状态电阻:500 毫欧 电压电源:单电源 电压 - 电源,单路/双路(±):1.4 V ~ 4.3 V 电流 - 电源:150nA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-XFDFN 供应商设备封装:8-XSON,SOT833-1 (1.95x1) 包装:Digi-Reel® 其它名称:568-5557-6
ADG1419BRMZ 功能描述:IC SWITCH 1 X SPDT 8MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 特色产品:MicroPak? 标准包装:1 系列:- 功能:开关 电路:2 x SPST - NC 导通状态电阻:500 毫欧 电压电源:单电源 电压 - 电源,单路/双路(±):1.4 V ~ 4.3 V 电流 - 电源:150nA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-XFDFN 供应商设备封装:8-XSON,SOT833-1 (1.95x1) 包装:Digi-Reel® 其它名称:568-5557-6
ADG1419BRMZ 制造商:Analog Devices 功能描述:IC ANALOG SWITCH SINGLE SPDT MSOP-8 制造商:Analog Devices 功能描述:IC, ANALOG SWITCH, SINGLE, SPDT, MSOP-8
ADG1419BRMZ-REEL7 功能描述:IC SWITCH 2.1OHM SPDT 8MSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关,多路复用器,多路分解器 系列:iCMOS® 标准包装:1,000 系列:- 功能:多路复用器 电路:1 x 4:1 导通状态电阻:- 电压电源:双电源 电压 - 电源,单路/双路(±):±5V 电流 - 电源:7mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC(0.154",3.90mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)